Arduino
/
inkplate-6-arduino-library
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add Linux instructions

This commit is contained in:
David Zovko 2020-10-25 09:10:00 +01:00 committed by GitHub
parent 3ebd4f6dd3
commit 75e37670a3
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 8 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
README.md
View File

@ -66,6 +66,14 @@ It is based on UART (serial) communication - connect the Inkplate to "Controller
Inkplate 6 has two options for powering it. First one is obvious - USB port at side of the board. Just plug any micro USB cable and you are good to go. Second option is battery. Supported batteries are standard Li-Ion/Li-Poly batteries with 3.7V nominal voltage. Connector for the battery is standard 2.00mm pitch JST connector. The onboard charger will charge the battery with 500mA when USB is plugged at the same time. You can use battery of any size or capacity if you don't have a enclosure. If you are using our enclosure, battery size shouldn't exceed 90mm x 40mm (3.5 x 1.57 inch) and 5mm (0.19 inch) in height. [This battery](https://e-radionica.com/en/li-ion-baterija-1200mah.html) is good fit for the Inkplate.
### Linux?
Running Linux? You'll need to run few other lines from your Terminal:
```
apt install python3-pip
pip3 install pyserial
apt install python-is-python3
```
### Micropython
If you are looking for micropython support, please find all details [here](https://github.com/e-radionicacom/Inkplate-6-micropython).