Arduino
/
inkplate-6-arduino-library
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update README.md

This commit is contained in:
David Zovko 2020-08-26 10:32:04 +02:00 committed by GitHub
parent 9bff038099
commit cb5e49da2c
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -59,7 +59,7 @@ As promised in an [early update](https://www.crowdsupply.com/e-radionica/inkplat
It is based on UART (serial) communication - connect the Inkplate to "master" board either via USB cable or directly via ESP32 RX and TX pins. Using standard UART at 115200 baud, you can send commands to change screen contents. For example, send *#H(000,000,"/img.bmp")** to show image img.bmp from SD card on the screen. Find very basic documentation for using it [here](https://github.com/e-radionicacom/Inkplate-6-Arduino-library/blob/master/examples/4.%20Others/1-Inkplate_Slave_Mode/Inkplate_slave_mode_documentation.txt).
### Battery power
Inkplate 6 has two options for powering it. First one is obvious - USB port at side of the board. Just plug any micro USB cable and you are good to go. Second option is battery. Supported batteries are standard Li-Ion/Li-Poly batteries with 3.7V nominal voltage. Connector for the battery is standard 2.00mm pitch JST connector. The onboard charger will charge the battery with 500mA when USB is plugged at the same time. You can use battery of any size or capacity if you don't have a enclosure. If you are using our enclosure, battery size shouldn't exceed 90mm x 40mm (3.5 x 1.57 inch) and 5mm (0.19 inch) in height.
Inkplate 6 has two options for powering it. First one is obvious - USB port at side of the board. Just plug any micro USB cable and you are good to go. Second option is battery. Supported batteries are standard Li-Ion/Li-Poly batteries with 3.7V nominal voltage. Connector for the battery is standard 2.00mm pitch JST connector. The onboard charger will charge the battery with 500mA when USB is plugged at the same time. You can use battery of any size or capacity if you don't have a enclosure. If you are using our enclosure, battery size shouldn't exceed 90mm x 40mm (3.5 x 1.57 inch) and 5mm (0.19 inch) in height. [This battery](https://e-radionica.com/en/li-ion-baterija-1200mah.html) is good fit for the Inkplate.
### Micropython
If you are looking for micropython support, it is still work in progress - we are new with it! :) When it's ready, we will let you know with new project update.