85 lines
3.8 KiB
C++
85 lines
3.8 KiB
C++
/*
|
|
4_Inkplate_Touchpads example for e-radionica.com Inkplate 6
|
|
For this example you will need only a micro USB cable and Inkplate 6.
|
|
Select "Inkplate 6(ESP32)" from Tools -> Board menu.
|
|
Don't have "Inkplate 6(ESP32)" option? Follow our tutorial and add it:
|
|
https://e-radionica.com/en/blog/add-inkplate-6-to-arduino-ide/
|
|
|
|
This example will show you how you can use built-in touchpads (on PCB marked with numbers 1, 2 and 3).
|
|
These are basically touch sensitive switches. You can read state each of these with function readTouchpad()
|
|
and the argument you need to pass to this function is PAD1 if you want to read the state of touchpad marked
|
|
as "1" on PCB, PAD2 for second touchpad, PAD3 for third. You can also use numbers as arguments.
|
|
For that you need to pass number 0 for touchpad that is marked as 1 on PCB, 1 for second touchpad and 2 for third.
|
|
Function will return 1 if selected touchpad is pressed, zero if not.
|
|
|
|
In this example, if you touch first pad, ti will decrese number showed on screen, if you touch thirs touch pad,
|
|
it will increase the number, if you touch second touchpad, it will reset number to zero.
|
|
|
|
NOTE: You can not use touch pads when enclosure is fitted on the Inkplate - they are not that sensitive!
|
|
|
|
Want to learn more about Inkplate? Visit www.inkplate.io
|
|
Looking to get support? Write on our forums: http://forum.e-radionica.com/en/
|
|
15 July 2020 by e-radionica.com
|
|
*/
|
|
|
|
#include "Inkplate.h" //Include Inkplate library to the sketch
|
|
Inkplate display(INKPLATE_1BIT); //Create an object on Inkplate library and also set library into 1 Bit mode (Monochrome)
|
|
|
|
int number = 0; //Variable that stores our number
|
|
int n = 0; //Variable that keeps track on how many times display is partially updated
|
|
void setup()
|
|
{
|
|
display.begin(); //Init Inkplate library (you should call this function ONLY ONCE)
|
|
display.clearDisplay(); //Clear frame buffer of display
|
|
display.display(); //Put clear image on display
|
|
display.setTextSize(5); //Set text scaling to five (text will be five times bigger)
|
|
display.setTextColor(BLACK, WHITE); //Set text color to black and background color to white
|
|
displayNumber(); //Call our function to display nubmer on screen
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
if (display.readTouchpad(PAD1))
|
|
{ //Check if first pad has been touched. If it is, decrement the number and refresh the screen.
|
|
number--;
|
|
displayNumber();
|
|
}
|
|
|
|
if (display.readTouchpad(PAD2))
|
|
{ //If you touched second touchpad, set number to zero and refresh screen by calling our displayNumber() function
|
|
number = 0;
|
|
displayNumber();
|
|
}
|
|
|
|
if (display.readTouchpad(PAD3))
|
|
{ //If you touched third touchpad, incerement the number and refresh the screen.
|
|
number++;
|
|
displayNumber();
|
|
}
|
|
delay(100); //Wait a little bit between readings.
|
|
}
|
|
|
|
//Function that will write you number to screen
|
|
void displayNumber()
|
|
{
|
|
display.clearDisplay(); //First, lets delete everything from frame buffer
|
|
display.setCursor(385, 280); //Set print cursor at X=385, Y=280 (roughly in the middle of the screen)
|
|
display.print(number, DEC); //Print the number
|
|
display.setCursor(255, 560); //Set new print position (right above first touchpad)
|
|
display.print('-'); //Print minus sign
|
|
display.setCursor(385, 560); //Set new print position (right above second touchpad)
|
|
display.print('0'); //Print zero
|
|
display.setCursor(520, 560); //Set new print position (right above third touchpad)
|
|
display.print('+'); //Print plus sign
|
|
if (n > 20)
|
|
{ //Chech if screen has been partially refreshed more than 20 times. If it is, do a full refresh. If is not, do a partial refresh
|
|
display.display();
|
|
n = 0;
|
|
}
|
|
else
|
|
{
|
|
display.partialUpdate();
|
|
n++;
|
|
}
|
|
}
|