inkplate-6-arduino-library/examples/3. Others/1-Inkplate_Slave_Mode/1-Inkplate_Slave_Mode.ino

337 lines
11 KiB
C++

/*
Inkplate_Slave_Mode sketch for e-radionica.com Inkplate 6
Select "Inkplate 6(ESP32)" from Tools -> Board menu.
Don't have "Inkplate 6(ESP32)" option? Follow our tutorial and add it:
https://e-radionica.com/en/blog/add-inkplate-6-to-arduino-ide/
Using this sketch, you don't have to program and control e-paper using Arduino code.
Instead, you can send UART command (explained in documentation that can be found inside folder of this sketch).
This give you flexibility that you can use this Inkplate 6 on any platform!
Because it uses UART, it's little bit slower and it's not recommended to send bunch of
drawPixel command to draw some image. Instead, load bitmaps and pictures on SD card and load image from SD.
If we missed some function, you can modify this and make yor own.
Also, every Inkplate comes with this slave mode right from the factory.
Learn more about Slave Mode in this update: https://www.crowdsupply.com/e-radionica/inkplate-6/updates/successfully-funded-also-third-party-master-controllers-and-partial-updates
UART settings are: 115200 baud, standard parity, ending with "\n\r" (both)
You can send commands via USB port or by directly connecting to ESP32 TX and RX pins.
Want to learn more about Inkplate? Visit www.inkplate.io
Looking to get support? Write on our forums: http://forum.e-radionica.com/en/
15 July 2020 by e-radionica.com
*/
#include <Inkplate.h>
Inkplate display(INKPLATE_1BIT);
#define BUFFER_SIZE 1000
char commandBuffer[BUFFER_SIZE + 1];
char strTemp[2001];
void setup() {
display.begin();
Serial.begin(115200);
memset(commandBuffer, 0, BUFFER_SIZE);
}
void loop() {
// put your main code here, to run repeatedly:
if (Serial.available()) {
while (Serial.available()) {
for (int i = 0; i < (BUFFER_SIZE - 1); i++) {
commandBuffer[i] = commandBuffer[i + 1];
}
commandBuffer[BUFFER_SIZE - 1] = Serial.read();
}
}
char *s = NULL;
char *e = NULL;
for (int i = 0; i < BUFFER_SIZE; i++) {
if (commandBuffer[i] == '#' && s == NULL) s = &commandBuffer[i];
if (commandBuffer[i] == '*' && e == NULL) e = &commandBuffer[i];
}
if (s != NULL && e != NULL) {
if ((e - s) > 0) {
int x, x1, x2, y, y1, y2, x3, y3, l, c, w, h, r, n;
char b;
char temp[150];
switch (*(s + 1)) {
case '?':
Serial.print("OK");
break;
case '0':
sscanf(s + 3, "%d,%d,%d", &x, &y, &c);
//sprintf(temp, "display.drawPixel(%d, %d, %d)\n\r", x, y, c);
//Serial.print(temp);
display.drawPixel(x, y, c);
break;
case '1':
sscanf(s + 3, "%d,%d,%d,%d,%d", &x1, &y1, &x2, &y2, &c);
//sprintf(temp, "display.drawLine(%d, %d, %d, %d, %d)\n\r", x1, y1, x2, y2, c);
//Serial.print(temp);
display.drawLine(x1, y1, x2, y2, c);
break;
case '2':
sscanf(s + 3, "%d,%d,%d,%d", &x, &y, &l, &c);
//sprintf(temp, "display.drawFastVLine(%d, %d, %d, %d)\n\r", x, y, l, c);
//Serial.print(temp);
display.drawFastVLine(x, y, l, c);
break;
case '3':
sscanf(s + 3, "%d,%d,%d,%d", &x, &y, &l, &c);
//sprintf(temp, "display.drawFastHLine(%d, %d, %d, %d)\n\r", x, y, l, c);
//Serial.print(temp);
display.drawFastHLine(x, y, l, c);
break;
case '4':
sscanf(s + 3, "%d,%d,%d,%d,%d", &x, &y, &w, &h, &c);
//sprintf(temp, "display.drawRect(%d, %d, %d, %d, %d)\n\r", x, y, w, h, c);
//Serial.print(temp);
display.drawRect(x, y, w, h, c);
break;
case '5':
sscanf(s + 3, "%d,%d,%d,%d", &x, &y, &r, &c);
//sprintf(temp, "display.drawCircle(%d, %d, %d, %d)\n\r", x, y, r, c);
//Serial.print(temp);
display.drawCircle(x, y, r, c);
break;
case '6':
sscanf(s + 3, "%d,%d,%d,%d,%d,%d,%d", &x1, &y1, &x2, &y2, &x3, &y3, &c);
//sprintf(temp, "display.drawTriangle(%d, %d, %d, %d, %d, %d, %d)\n\r", x1, y1, x2, y2, x3, y3, c);
//Serial.print(temp);
display.drawTriangle(x1, y1, x2, y2, x3, y3, c);
break;
case '7':
sscanf(s + 3, "%d,%d,%d,%d,%d,%d", &x, &y, &w, &h, &r, &c);
//sprintf(temp, "display.drawRoundRect(%d, %d, %d, %d, %d, %d)\n\r", x, y, w, h, r, c);
//Serial.print(temp);
display.drawRoundRect(x, y, w, h, r, c);
break;
case '8':
sscanf(s + 3, "%d,%d,%d,%d,%d", &x, &y, &w, &h, &c);
//sprintf(temp, "display.fillRect(%d, %d, %d, %d, %d)\n\r", x, y, w, h, c);
//Serial.print(temp);
display.fillRect(x, y, w, h, c);
break;
case '9':
sscanf(s + 3, "%d,%d,%d,%d", &x, &y, &r, &c);
//sprintf(temp, "display.fillCircle(%d, %d, %d, %d)\n\r", x, y, r, c);
//Serial.print(temp);
display.fillCircle(x, y, r, c);
break;
case 'A':
sscanf(s + 3, "%d,%d,%d,%d,%d,%d,%d", &x1, &y1, &x2, &y2, &x3, &y3, &c);
//sprintf(temp, "display.fillTriangle(%d, %d, %d, %d, %d, %d, %d)\n\r", x1, y1, x2, y2, x3, y3, c);
//Serial.print(temp);
display.fillTriangle(x1, y1, x2, y2, x3, y3, c);
break;
case 'B':
sscanf(s + 3, "%d,%d,%d,%d,%d,%d", &x, &y, &w, &h, &r, &c);
//sprintf(temp, "display.fillRoundRect(%d, %d, %d, %d, %d, %d)\n\r", x, y, w, h, r, c);
//Serial.print(temp);
display.fillRoundRect(x, y, w, h, r, c);
break;
case 'C':
sscanf(s + 3, "\"%2000[^\"]\"", strTemp);
n = strlen(strTemp);
for (int i = 0; i < n; i++) {
strTemp[i] = toupper(strTemp[i]);
}
for (int i = 0; i < n; i += 2) {
strTemp[i / 2] = (hexToChar(strTemp[i]) << 4) | (hexToChar(strTemp[i + 1]) & 0x0F);
}
strTemp[n / 2] = 0;
//Serial.print("display.print(\"");
//Serial.print(strTemp);
//Serial.println("\");");
display.print(strTemp);
break;
case 'D':
sscanf(s + 3, "%d", &c);
//sprintf(temp, "display.setTextSize(%d)\n", c);
//Serial.print(temp);
display.setTextSize(c);
break;
case 'E':
sscanf(s + 3, "%d,%d", &x, &y);
//sprintf(temp, "display.setCursor(%d, %d)\n", x, y);
//Serial.print(temp);
display.setCursor(x, y);
break;
case 'F':
sscanf(s + 3, "%c", &b);
//sprintf(temp, "display.setTextWrap(%s)\n", b == 'T' ? "True" : "False");
//Serial.print(temp);
if (b == 'T') display.setTextWrap(true);
if (b == 'F') display.setTextWrap(false);
break;
case 'G':
sscanf(s + 3, "%d", &c);
c &= 3;
//sprintf(temp, "display.setRotation(%d)\n", c);
//Serial.print(temp);
display.setRotation(c);
break;
case 'H':
sscanf(s + 3, "%d,%d,\"%149[^\"]\"", &x, &y, strTemp);
n = strlen(strTemp);
for (int i = 0; i < n; i++) {
strTemp[i] = toupper(strTemp[i]);
}
for (int i = 0; i < n; i += 2) {
strTemp[i / 2] = (hexToChar(strTemp[i]) << 4) | (hexToChar(strTemp[i + 1]) & 0x0F);
}
strTemp[n / 2] = 0;
r = display.sdCardInit();
if (r) {
r = display.drawBitmapFromSD(strTemp, x, y);
Serial.print("#H(");
Serial.print(r, DEC);
Serial.println(")*");
Serial.flush();
//sprintf(temp, "display.drawBitmap(%d, %d, %s)\n", x, y, strTemp);
//Serial.print(temp);
} else {
Serial.println("#H(-1)*");
Serial.flush();
}
break;
case 'I':
sscanf(s + 3, "%d", &c);
//sprintf(temp, "display.setDisplayMode(%s)\n", c == 0 ? "INKPLATE_1BIT" : "INKPLATE_3BIT");
//Serial.print(temp);
if (c == INKPLATE_1BIT) display.selectDisplayMode(INKPLATE_1BIT);
if (c == INKPLATE_3BIT) display.selectDisplayMode(INKPLATE_3BIT);
break;
case 'J':
sscanf(s + 3, "%c", &b);
if (b == '?') {
//if (0 == 0) {
// Serial.println("#J(0)*");
//} else {
// Serial.println("#J(1)*");
//}
if (display.getDisplayMode() == INKPLATE_1BIT) {
Serial.println("#J(0)*");
Serial.flush();
}
if (display.getDisplayMode() == INKPLATE_3BIT) {
Serial.println("#J(1)*");
Serial.flush();
}
}
break;
case 'K':
sscanf(s + 3, "%c", &b);
if (b == '1') {
//Serial.print("display.clearDisplay();\n");
display.clearDisplay();
}
break;
case 'L':
sscanf(s + 3, "%c", &b);
if (b == '1') {
//Serial.print("display.display();\n");
display.display();
}
break;
case 'M':
sscanf(s + 3, "%d,%d,%d", &y1, &x2, &y2);
//sprintf(temp, "display.partialUpdate(%d, %d, %d);\n", y1, x2, y2);
//Serial.print(temp);
display.partialUpdate();
break;
case 'N':
sscanf(s + 3, "%c", &b);
if (b == '?') {
Serial.print("#N(");
Serial.print(display.readTemperature(), DEC);
//Serial.print(23, DEC);
Serial.println(")*");
Serial.flush();
}
break;
case 'O':
sscanf(s + 3, "%d", &c);
if (c >= 0 && c <= 2) {
Serial.print("#O(");
Serial.print(display.readTouchpad(c), DEC);
//Serial.print(0, DEC);
Serial.println(")*");
Serial.flush();
}
break;
case 'P':
sscanf(s + 3, "%c", &b);
if (b == '?') {
Serial.print("#P(");
Serial.print(display.readBattery(), 2);
//Serial.print(3.54, 2);
Serial.println(")*");
Serial.flush();
}
break;
case 'Q':
sscanf(s + 3, "%d", &c);
c &= 1;
//if (c == 0) Serial.print("display.einkOff();\n");
//if (c == 1) Serial.print("display.einkOn();\n");
if (c == 0) display.einkOff();
if (c == 1) display.einkOn();
break;
case 'R':
sscanf(s + 3, "%c", &b);
if (b == '?') {
Serial.print("#R(");
Serial.print(display.getPanelState(), DEC);
//Serial.print(1, DEC);
Serial.println(")*");
Serial.flush();
}
break;
}
*s = 0;
*e = 0;
}
}
}
int hexToChar(char c) {
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
return -1;
}