From cd845185fef7a9d6d1295363d79828fef99d2eef Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?J=C3=B6rg=20Deckert?=
 <jdeckert@noreply.git.unitas-network.de>
Date: Thu, 27 Jun 2024 08:44:46 +0200
Subject: [PATCH] README.md aktualisiert

---
 README.md | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/README.md b/README.md
index 45b7411..aef41b8 100644
--- a/README.md
+++ b/README.md
@@ -85,10 +85,6 @@ python ~/SHARI/SA818-prog2.01.py
 ```
 
 ```
-No previous programming data available.
-
-------------------------------------------------------
-
 SA818-prog, Version 2.01
 Programing SHARI PiXX / SHARI PiHat / SA818(U/V) Module
 Programming Device name:
@@ -100,10 +96,13 @@ Testing serial communications
 Serial communications with the SA818 module are OK
 
 What are you programming?
-Enter 1,2 or 3 where SHARI PiXX=1, SHARI PiHat=2, SA818 Module=3: 2
+Enter 1,2 or 3 where SHARI PiXX=1, SHARI PiHat=2, SA818 Module=3: 3
 
-	Programming a SHARI PiHat
-	Wide channel spacing
+Programming a generic SA818 module
+Enter Channel Spacing (Narrow=0 or Wide=1): 0
+
+	Programming an SA818 module
+	Narrow channel spacing
 
 Enter band (VHF=1, UHF=2): 1
 	You chose VHF
@@ -120,8 +119,8 @@ Do you want to use a sub audible tone? (0 = No, 1 = CTCSS, 2= DCS): 0
 Enter Squelch Value (0-8): 0
 	Squelch is set to 0
 
-Enter Volume (1-8): 5
-	Volume is set to 5
+Enter Volume (1-8): 6
+	Volume is set to 6
 
 Enable Pre/De-Emphasis (y/[n]): n
 	Pre/De-Emphasis is not enabled
@@ -135,14 +134,14 @@ Enable Low Pass Filter (y/[n]): n
 
 Verify:
 ------------------------------------------------------
-     Channel Spacing: 1
+     Channel Spacing: 0
         Tx Frequency: 144.8000
         Rx Frequency: 144.8000
        Tx CTCSS code: 0000
        Rx CTCSS code: 0000
        Reverse Burst: n
        Squelch Value: 0
-        Volume Value: 5
+        Volume Value: 6
  PreEmphasis Enabled: n
    High Pass Enabled: n
     Low Pass Enabled: n
@@ -151,7 +150,7 @@ Verify:
 Is this correct ([y]/n) ?y
 Sending Frequency, Sub Audible Tone, and Squelch Information...
 Frequency, Sub Audible Tone, and Squelch information correct
-Setting Volume - 5
+Setting Volume - 6
 Setting Reverse Burst
 Setting Filters
 
@@ -159,6 +158,8 @@ Programming Successful
 
 Configuration log written to /home/aprsadmin/.SA818.log
 ```
+Bei "What are you programming?" wird nicht "SHARI PiHat=2" gewählt, weil damit automatisch Wide channel spacing (25kHz) konfiguriert werden würde. Für APRS ist aber "Narrow channel spacing" mit 12,5kHz korrekt.
+
 
 ## SHARI PiHat Audio
 
@@ -200,13 +201,13 @@ CHANNEL 0
 PTT CM108
 ```
 
-Nun kann Dire-Wolf für einen ersten test gestartet werden:
+Nun kann Dire-Wolf für einen ersten Test gestartet werden:
 
 ```
 /usr/bin/direwolf -c /etc/direwolf.conf
 ```
 
-Nun sollten die empfangenen APRS-Pakete angezeigt werden.
+Damit sollten die empfangenen APRS-Pakete angezeigt werden.
 
 
 ## Installation dxlAPRS