493 lines
16 KiB
Plaintext
493 lines
16 KiB
Plaintext
|
''***************************************
|
||
|
|
''* PS/2 Mouse Driver v1.1 *
|
||
|
|
''* Author: Chip Gracey *
|
||
|
|
''* Copyright (c) 2006 Parallax, Inc. *
|
||
|
|
''* See end of file for terms of use. *
|
||
|
|
''***************************************
|
||
|
|
|
||
|
|
' v1.0 - 01 May 2006 - original version
|
||
|
|
' v1.1 - 01 Jun 2006 - bound coordinates added to simplify upper objects
|
||
|
|
|
||
|
|
|
||
|
|
VAR
|
||
|
|
|
||
|
|
long cog
|
||
|
|
|
||
|
|
long oldx, oldy, oldz 'must be followed by parameters (10 contiguous longs)
|
||
|
|
|
||
|
|
long par_x 'absolute x read-only (7 contiguous longs)
|
||
|
|
long par_y 'absolute y read-only
|
||
|
|
long par_z 'absolute z read-only
|
||
|
|
long par_buttons 'button states read-only
|
||
|
|
long par_present 'mouse present read-only
|
||
|
|
long par_dpin 'data pin write-only
|
||
|
|
long par_cpin 'clock pin write-only
|
||
|
|
|
||
|
|
long bx_min, by_min, bz_min 'min/max must be contiguous
|
||
|
|
long bx_max, by_max, bz_max
|
||
|
|
long bx_div, by_div, bz_div
|
||
|
|
long bx_acc, by_acc, bz_acc
|
||
|
|
|
||
|
|
|
||
|
|
PUB start(dpin, cpin) : okay
|
||
|
|
|
||
|
|
'' Start mouse driver - starts a cog
|
||
|
|
'' returns false if no cog available
|
||
|
|
''
|
||
|
|
'' dpin = data signal on PS/2 jack
|
||
|
|
'' cpin = clock signal on PS/2 jack
|
||
|
|
''
|
||
|
|
'' use 100-ohm resistors between pins and jack
|
||
|
|
'' use 10K-ohm resistors to pull jack-side signals to VDD
|
||
|
|
'' connect jack-power to 5V, jack-gnd to VSS
|
||
|
|
|
||
|
|
stop
|
||
|
|
par_dpin := dpin
|
||
|
|
par_cpin := cpin
|
||
|
|
okay := cog := cognew(@entry, @par_x) + 1
|
||
|
|
|
||
|
|
|
||
|
|
PUB stop
|
||
|
|
|
||
|
|
'' Stop mouse driver - frees a cog
|
||
|
|
|
||
|
|
if cog
|
||
|
|
cogstop(cog~ - 1)
|
||
|
|
longfill(@oldx, 0, 10)
|
||
|
|
|
||
|
|
|
||
|
|
PUB present : type
|
||
|
|
|
||
|
|
'' Check if mouse present - valid ~2s after start
|
||
|
|
'' returns mouse type:
|
||
|
|
''
|
||
|
|
'' 3 = five-button scrollwheel mouse
|
||
|
|
'' 2 = three-button scrollwheel mouse
|
||
|
|
'' 1 = two-button or three-button mouse
|
||
|
|
'' 0 = no mouse connected
|
||
|
|
|
||
|
|
type := par_present
|
||
|
|
|
||
|
|
|
||
|
|
PUB button(b) : state
|
||
|
|
|
||
|
|
'' Get the state of a particular button
|
||
|
|
'' returns t|f
|
||
|
|
|
||
|
|
state := -(par_buttons >> b & 1)
|
||
|
|
|
||
|
|
|
||
|
|
PUB buttons : states
|
||
|
|
|
||
|
|
'' Get the states of all buttons
|
||
|
|
'' returns buttons:
|
||
|
|
''
|
||
|
|
'' bit4 = right-side button
|
||
|
|
'' bit3 = left-side button
|
||
|
|
'' bit2 = center/scrollwheel button
|
||
|
|
'' bit1 = right button
|
||
|
|
'' bit0 = left button
|
||
|
|
|
||
|
|
states := par_buttons
|
||
|
|
|
||
|
|
|
||
|
|
{PUB abs_x : x
|
||
|
|
|
||
|
|
'' Get absolute-x
|
||
|
|
|
||
|
|
x := par_x
|
||
|
|
|
||
|
|
|
||
|
|
PUB abs_y : y
|
||
|
|
|
||
|
|
'' Get absolute-y
|
||
|
|
|
||
|
|
y := par_y
|
||
|
|
|
||
|
|
}
|
||
|
|
PUB abs_z : z
|
||
|
|
|
||
|
|
'' Get absolute-z (scrollwheel)
|
||
|
|
|
||
|
|
z := par_z
|
||
|
|
|
||
|
|
|
||
|
|
{PUB delta_reset
|
||
|
|
|
||
|
|
'' Reset deltas
|
||
|
|
|
||
|
|
oldx := par_x
|
||
|
|
oldy := par_y
|
||
|
|
oldz := par_z
|
||
|
|
|
||
|
|
}
|
||
|
|
PUB delta_x : x | newx
|
||
|
|
|
||
|
|
'' Get delta-x
|
||
|
|
|
||
|
|
newx := par_x
|
||
|
|
x := newx - oldx
|
||
|
|
oldx := newx
|
||
|
|
|
||
|
|
|
||
|
|
PUB delta_y : y | newy
|
||
|
|
|
||
|
|
'' Get delta-y
|
||
|
|
|
||
|
|
newy := par_y
|
||
|
|
y := newy - oldy
|
||
|
|
oldy := newy
|
||
|
|
|
||
|
|
|
||
|
|
PUB delta_z : z | newz
|
||
|
|
|
||
|
|
'' Get delta-z (scrollwheel)
|
||
|
|
|
||
|
|
newz := par_z
|
||
|
|
z := newz - oldz
|
||
|
|
oldz := newz
|
||
|
|
|
||
|
|
|
||
|
|
PUB bound_limits(xmin, ymin, zmin, xmax, ymax, zmax) | i
|
||
|
|
|
||
|
|
'' Set bounding limits
|
||
|
|
|
||
|
|
longmove(@bx_min, @xmin, 6)
|
||
|
|
|
||
|
|
|
||
|
|
PUB bound_scales(x_scale, y_scale, z_scale)
|
||
|
|
|
||
|
|
'' Set bounding scales (usually +/-1's, bigger values divide)
|
||
|
|
|
||
|
|
longmove(@bx_div, @x_scale, 3)
|
||
|
|
|
||
|
|
|
||
|
|
PUB bound_preset(x, y, z) | i, d
|
||
|
|
|
||
|
|
'' Preset bound coordinates
|
||
|
|
|
||
|
|
repeat i from 0 to 2
|
||
|
|
d := ||bx_div[i]
|
||
|
|
bx_acc[i] := (x[i] - bx_min[i]) * d + d >> 1
|
||
|
|
|
||
|
|
|
||
|
|
PUB bound_x : x
|
||
|
|
|
||
|
|
'' Get bound-x
|
||
|
|
|
||
|
|
x := bound(0, delta_x)
|
||
|
|
|
||
|
|
|
||
|
|
PUB bound_y : y
|
||
|
|
|
||
|
|
'' Get bound-y
|
||
|
|
|
||
|
|
y := bound(1, delta_y)
|
||
|
|
|
||
|
|
|
||
|
|
PUB bound_z : z
|
||
|
|
|
||
|
|
'' Get bound-z
|
||
|
|
|
||
|
|
z := bound(2, delta_z)
|
||
|
|
|
||
|
|
|
||
|
|
PRI bound(i, delta) : b | d
|
||
|
|
|
||
|
|
d := bx_div[i]
|
||
|
|
b := bx_min[i] + (bx_acc[i] := bx_acc[i] + delta * (d < 0) | 1 #> 0 <# (bx_max[i] - bx_min[i] + 1) * ||d - 1) / ||d
|
||
|
|
|
||
|
|
|
||
|
|
DAT
|
||
|
|
|
||
|
|
'***************************************
|
||
|
|
'* Assembly language PS/2 mouse driver *
|
||
|
|
'***************************************
|
||
|
|
|
||
|
|
org
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Entry
|
||
|
|
'
|
||
|
|
entry mov p,par 'load input parameters:
|
||
|
|
add p,#5*4 '_dpin/_cpin
|
||
|
|
rdlong _dpin,p
|
||
|
|
add p,#4
|
||
|
|
rdlong _cpin,p
|
||
|
|
|
||
|
|
mov dmask,#1 'set pin masks
|
||
|
|
shl dmask,_dpin
|
||
|
|
mov cmask,#1
|
||
|
|
shl cmask,_cpin
|
||
|
|
|
||
|
|
test _dpin,#$20 wc 'modify port registers within code
|
||
|
|
muxc _d1,dlsb
|
||
|
|
muxc _d2,dlsb
|
||
|
|
muxc _d3,#1
|
||
|
|
muxc _d4,#1
|
||
|
|
test _cpin,#$20 wc
|
||
|
|
muxc _c1,dlsb
|
||
|
|
muxc _c2,dlsb
|
||
|
|
muxc _c3,#1
|
||
|
|
|
||
|
|
movd :par,#_x 'reset output parameters:
|
||
|
|
mov p,#5 '_x/_y/_z/_buttons/_present
|
||
|
|
:par mov 0,#0
|
||
|
|
add :par,dlsb
|
||
|
|
djnz p,#:par
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Reset mouse
|
||
|
|
'
|
||
|
|
reset mov dira,#0 'reset directions
|
||
|
|
mov dirb,#0
|
||
|
|
|
||
|
|
mov stat,#1 'set reset flag
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Update parameters
|
||
|
|
'
|
||
|
|
update movd :par,#_x 'update output parameters:
|
||
|
|
mov p,par '_x/_y/_z/_buttons/_present
|
||
|
|
mov q,#5
|
||
|
|
:par wrlong 0,p
|
||
|
|
add :par,dlsb
|
||
|
|
add p,#4
|
||
|
|
djnz q,#:par
|
||
|
|
|
||
|
|
test stat,#1 wc 'if reset flag, transmit reset command
|
||
|
|
if_c mov data,#$FF
|
||
|
|
if_c call #transmit
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Get data packet
|
||
|
|
'
|
||
|
|
mov stat,#0 'reset state
|
||
|
|
|
||
|
|
call #receive 'receive first byte
|
||
|
|
|
||
|
|
cmp data,#$AA wz 'powerup/reset?
|
||
|
|
if_z jmp #init
|
||
|
|
|
||
|
|
mov _buttons,data 'data packet, save buttons
|
||
|
|
|
||
|
|
call #receive 'receive second byte
|
||
|
|
|
||
|
|
test _buttons,#$10 wc 'adjust _x
|
||
|
|
muxc data,signext
|
||
|
|
add _x,data
|
||
|
|
|
||
|
|
call #receive 'receive third byte
|
||
|
|
|
||
|
|
test _buttons,#$20 wc 'adjust _y
|
||
|
|
muxc data,signext
|
||
|
|
add _y,data
|
||
|
|
|
||
|
|
and _buttons,#%111 'trim buttons
|
||
|
|
|
||
|
|
cmp _present,#2 wc 'if not scrollwheel mouse, update parameters
|
||
|
|
if_c jmp #update
|
||
|
|
|
||
|
|
|
||
|
|
call #receive 'scrollwheel mouse, receive fourth byte
|
||
|
|
|
||
|
|
cmp _present,#3 wz 'if 5-button mouse, handle two extra buttons
|
||
|
|
if_z test data,#$10 wc
|
||
|
|
if_z_and_c or _buttons,#%01000
|
||
|
|
if_z test data,#$20 wc
|
||
|
|
if_z_and_c or _buttons,#%10000
|
||
|
|
|
||
|
|
shl data,#28 'adjust _z
|
||
|
|
sar data,#28
|
||
|
|
sub _z,data
|
||
|
|
|
||
|
|
jmp #update 'update parameters
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Initialize mouse
|
||
|
|
'
|
||
|
|
init call #receive '$AA received, receive id
|
||
|
|
|
||
|
|
movs crate,#100 'try to enable 3-button scrollwheel type
|
||
|
|
call #checktype
|
||
|
|
movs crate,#200 'try to enable 5-button scrollwheel type
|
||
|
|
call #checktype
|
||
|
|
shr data,#1 'if neither, 3-button type
|
||
|
|
add data,#1
|
||
|
|
mov _present,data
|
||
|
|
|
||
|
|
movs srate,#200 'set 200 samples per second
|
||
|
|
call #setrate
|
||
|
|
|
||
|
|
mov data,#$F4 'enable data reporting
|
||
|
|
call #transmit
|
||
|
|
|
||
|
|
jmp #update
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Check mouse type
|
||
|
|
'
|
||
|
|
checktype movs srate,#200 'perform "knock" sequence to enable
|
||
|
|
call #setrate '..scrollwheel and extra buttons
|
||
|
|
|
||
|
|
crate movs srate,#200/100
|
||
|
|
call #setrate
|
||
|
|
|
||
|
|
movs srate,#80
|
||
|
|
call #setrate
|
||
|
|
|
||
|
|
mov data,#$F2 'read type
|
||
|
|
call #transmit
|
||
|
|
call #receive
|
||
|
|
|
||
|
|
checktype_ret ret
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Set sample rate
|
||
|
|
'
|
||
|
|
setrate mov data,#$F3
|
||
|
|
call #transmit
|
||
|
|
srate mov data,#0
|
||
|
|
call #transmit
|
||
|
|
|
||
|
|
setrate_ret ret
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Transmit byte to mouse
|
||
|
|
'
|
||
|
|
transmit
|
||
|
|
_c1 or dira,cmask 'pull clock low
|
||
|
|
movs napshr,#13 'hold clock for ~128us (must be >100us)
|
||
|
|
call #nap
|
||
|
|
_d1 or dira,dmask 'pull data low
|
||
|
|
movs napshr,#18 'hold data for ~4us
|
||
|
|
call #nap
|
||
|
|
_c2 xor dira,cmask 'release clock
|
||
|
|
|
||
|
|
test data,#$0FF wc 'append parity and stop bits to byte
|
||
|
|
muxnc data,#$100
|
||
|
|
or data,dlsb
|
||
|
|
|
||
|
|
mov p,#10 'ready 10 bits
|
||
|
|
transmit_bit call #wait_c0 'wait until clock low
|
||
|
|
shr data,#1 wc 'output data bit
|
||
|
|
_d2 muxnc dira,dmask
|
||
|
|
mov wcond,c1 'wait until clock high
|
||
|
|
call #wait
|
||
|
|
djnz p,#transmit_bit 'another bit?
|
||
|
|
|
||
|
|
mov wcond,c0d0 'wait until clock and data low
|
||
|
|
call #wait
|
||
|
|
mov wcond,c1d1 'wait until clock and data high
|
||
|
|
call #wait
|
||
|
|
|
||
|
|
call #receive_ack 'receive ack byte with timed wait
|
||
|
|
cmp data,#$FA wz 'if ack error, reset mouse
|
||
|
|
if_nz jmp #reset
|
||
|
|
|
||
|
|
transmit_ret ret
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Receive byte from mouse
|
||
|
|
'
|
||
|
|
receive test _cpin,#$20 wc 'wait indefinitely for initial clock low
|
||
|
|
waitpne cmask,cmask
|
||
|
|
receive_ack
|
||
|
|
mov p,#11 'ready 11 bits
|
||
|
|
receive_bit call #wait_c0 'wait until clock low
|
||
|
|
movs napshr,#16 'pause ~16us
|
||
|
|
call #nap
|
||
|
|
_d3 test dmask,ina wc 'input data bit
|
||
|
|
rcr data,#1
|
||
|
|
mov wcond,c1 'wait until clock high
|
||
|
|
call #wait
|
||
|
|
djnz p,#receive_bit 'another bit?
|
||
|
|
|
||
|
|
shr data,#22 'align byte
|
||
|
|
test data,#$1FF wc 'if parity error, reset mouse
|
||
|
|
if_nc jmp #reset
|
||
|
|
and data,#$FF 'isolate byte
|
||
|
|
|
||
|
|
receive_ack_ret
|
||
|
|
receive_ret ret
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Wait for clock/data to be in required state(s)
|
||
|
|
'
|
||
|
|
wait_c0 mov wcond,c0 '(wait until clock low)
|
||
|
|
|
||
|
|
wait mov q,tenms 'set timeout to 10ms
|
||
|
|
|
||
|
|
wloop movs napshr,#18 'nap ~4us
|
||
|
|
call #nap
|
||
|
|
_c3 test cmask,ina wc 'check required state(s)
|
||
|
|
_d4 test dmask,ina wz 'loop until got state(s) or timeout
|
||
|
|
wcond if_never djnz q,#wloop '(replaced with c0/c1/c0d0/c1d1)
|
||
|
|
|
||
|
|
tjz q,#reset 'if timeout, reset mouse
|
||
|
|
wait_ret
|
||
|
|
wait_c0_ret ret
|
||
|
|
|
||
|
|
|
||
|
|
c0 if_c djnz q,#wloop '(if_never replacements)
|
||
|
|
c1 if_nc djnz q,#wloop
|
||
|
|
c0d0 if_c_or_nz djnz q,#wloop
|
||
|
|
c1d1 if_nc_or_z djnz q,#wloop
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Nap
|
||
|
|
'
|
||
|
|
nap rdlong t,#0 'get clkfreq
|
||
|
|
napshr shr t,#18/16/13 'shr scales time
|
||
|
|
min t,#3 'ensure waitcnt won't snag
|
||
|
|
add t,cnt 'add cnt to time
|
||
|
|
waitcnt t,#0 'wait until time elapses (nap)
|
||
|
|
|
||
|
|
nap_ret ret
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Initialized data
|
||
|
|
'
|
||
|
|
dlsb long 1 << 9
|
||
|
|
tenms long 10_000 / 4
|
||
|
|
signext long $FFFFFF00
|
||
|
|
'
|
||
|
|
'
|
||
|
|
' Uninitialized data
|
||
|
|
'
|
||
|
|
dmask res 1
|
||
|
|
cmask res 1
|
||
|
|
stat res 1
|
||
|
|
data res 1
|
||
|
|
p res 1
|
||
|
|
q res 1
|
||
|
|
t res 1
|
||
|
|
|
||
|
|
_x res 1 'write-only
|
||
|
|
_y res 1 'write-only
|
||
|
|
_z res 1 'write-only
|
||
|
|
_buttons res 1 'write-only
|
||
|
|
_present res 1 'write-only
|
||
|
|
_dpin res 1 'read-only
|
||
|
|
_cpin res 1 'read-only
|
||
|
|
|
||
|
|
|
||
|
|
{{
|
||
|
|
|
||
|
|
┌──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
|
||
|
|
│ TERMS OF USE: MIT License │
|
||
|
|
├──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┤
|
||
|
|
│Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation │
|
||
|
|
│files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, │
|
||
|
|
│modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software│
|
||
|
|
│is furnished to do so, subject to the following conditions: │
|
||
|
|
│ │
|
||
|
|
│The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.│
|
||
|
|
│ │
|
||
|
|
│THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE │
|
||
|
|
│WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR │
|
||
|
|
│COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, │
|
||
|
|
│ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. │
|
||
|
|
└──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
|
||
|
|
}}
|