From 3272210ba59816ba7fdac624ca1acd5cc2ac7da2 Mon Sep 17 00:00:00 2001 From: Albert Hopkins Date: Sun, 10 Jul 2016 10:10:25 +0000 Subject: [PATCH] appliances: remove kde * I don't use it * It doesn't support XDMCP anymore * It's more trouble than it's worth --- appliances/kde/Makefile | 13 - appliances/kde/Xaccess | 67 ----- appliances/kde/kdm.start | 6 - appliances/kde/kdmrc | 588 ------------------------------------- appliances/kde/knotifyrc | 10 - appliances/kde/make.conf | 5 - appliances/kde/package.use | 63 ---- appliances/kde/world | 3 - 8 files changed, 755 deletions(-) delete mode 100644 appliances/kde/Makefile delete mode 100644 appliances/kde/Xaccess delete mode 100755 appliances/kde/kdm.start delete mode 100644 appliances/kde/kdmrc delete mode 100644 appliances/kde/knotifyrc delete mode 100644 appliances/kde/make.conf delete mode 100644 appliances/kde/package.use delete mode 100644 appliances/kde/world diff --git a/appliances/kde/Makefile b/appliances/kde/Makefile deleted file mode 100644 index 9ef110d..0000000 --- a/appliances/kde/Makefile +++ /dev/null @@ -1,13 +0,0 @@ - -preinstall: - -postinstall: kdmrc kdm.start Xaccess knotifyrc - cp kdmrc Xaccess "$(CHROOT)"/usr/share/config/kdm - mkdir -p "$(CHROOT)"/etc/skel/.kde4/share/config - cp knotifyrc "$(CHROOT)"/etc/skel/.kde4/share/config/knotifyrc - cp kdm.start "$(CHROOT)"/etc/local.d/kdm.start - $(inroot) ln -nsf /etc/init.d/dbus /etc/runlevels/default/dbus - -clean: - - diff --git a/appliances/kde/Xaccess b/appliances/kde/Xaccess deleted file mode 100644 index 914153d..0000000 --- a/appliances/kde/Xaccess +++ /dev/null @@ -1,67 +0,0 @@ -# Xaccess - Access control file for XDMCP connections -# -# To control Direct and Broadcast access: -# -# pattern -# -# To control Indirect queries: -# -# pattern list of hostnames and/or macros ... -# -# To use the chooser: -# -# pattern CHOOSER BROADCAST -# -# or -# -# pattern CHOOSER list of hostnames and/or macros ... -# -# To define macros: -# -# %name list of hosts ... -# -# The first form tells xdm which displays to respond to itself. -# The second form tells xdm to forward indirect queries from hosts matching -# the specified pattern to the indicated list of hosts. -# The third form tells xdm to handle indirect queries using the chooser; -# the chooser is directed to send its own queries out via the broadcast -# address and display the results on the terminal. -# The fourth form is similar to the third, except instead of using the -# broadcast address, it sends DirectQuerys to each of the hosts in the list -# -# In all cases, xdm uses the first entry which matches the terminal; -# for IndirectQuery messages only entries with right hand sides can -# match, for Direct and Broadcast Query messages, only entries without -# right hand sides can match. -# - -* #any host can get a login window - -# -# To hardwire a specific terminal to a specific host, you can -# leave the terminal sending indirect queries to this host, and -# use an entry of the form: -# - -#terminal-a host-a - - -# -# The nicest way to run the chooser is to just ask it to broadcast -# requests to the network - that way new hosts show up automatically. -# Sometimes, however, the chooser cannot figure out how to broadcast, -# so this may not work in all environments. -# - -* CHOOSER BROADCAST #any indirect host can get a chooser - -# -# If you would prefer to configure the set of hosts each terminal sees, -# then just uncomment these lines (and comment the CHOOSER line above) -# and edit the %hostlist line as appropriate -# - -#%hostlist host-a host-b - -* CHOOSER %hostlist # -* diff --git a/appliances/kde/kdm.start b/appliances/kde/kdm.start deleted file mode 100755 index 281ea4c..0000000 --- a/appliances/kde/kdm.start +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/sh -# start script for baselayout-2 to start kdm - -/usr/bin/kdm -daemon - -exit 0 diff --git a/appliances/kde/kdmrc b/appliances/kde/kdmrc deleted file mode 100644 index e47d63e..0000000 --- a/appliances/kde/kdmrc +++ /dev/null @@ -1,588 +0,0 @@ -# KDM master configuration file -# -# Definition: the greeter is the login dialog, i.e., the part of KDM -# which the user sees. -# -# You can configure every X-display individually. -# Every display has a display name, which consists of a host name -# (which is empty for local displays specified in {Static|Reserve}Servers), -# a colon, and a display number. Additionally, a display belongs to a -# display class (which can be ignored in most cases; the control center -# does not support this feature at all). -# Sections with display-specific settings have the formal syntax -# "[X-" host [":" number [ "_" class ]] "-" sub-section "]" -# You can use the "*" wildcard for host, number, and class. You may omit -# trailing components; they are assumed to be "*" then. -# The host part may be a domain specification like ".inf.tu-dresden.de". -# It may also be "+", which means non-empty, i.e. remote displays only. -# From which section a setting is actually taken is determined by these -# rules: -# - an exact match takes precedence over a partial match (for the host part), -# which in turn takes precedence over a wildcard ("+" taking precedence -# over "*") -# - precedence decreases from left to right for equally exact matches -# Example: display name "myhost:0", class "dpy". -# [X-myhost:0_dpy] precedes -# [X-myhost:0_*] (same as [X-myhost:0]) precedes -# [X-myhost:*_dpy] precedes -# [X-myhost:*_*] (same as [X-myhost]) precedes -# [X-+:0_dpy] precedes -# [X-*:0_dpy] precedes -# [X-*:0_*] (same as [X-*:0]) precedes -# [X-*:*_*] (same as [X-*]) -# These sections do NOT match this display: -# [X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*] -# If a setting is not found in any matching section, the default is used. -# -# Every comment applies to the following section or key. Note that all -# comments will be lost if you change this file with the kcontrol frontend. -# The defaults refer to KDM's built-in values, not anything set in this file. -# -# Special characters need to be backslash-escaped (leading and trailing -# spaces (\s), tab (\t), linefeed (\n), carriage return (\r) and the -# backslash itself (\\)). -# In lists, fields are separated with commas without whitespace in between. -# Some command strings are subject to simplified sh-style word splitting: -# single quotes (') and double quotes (") have the usual meaning; the backslash -# quotes everything (not only special characters). Note that the backslashes -# need to be doubled because of the two levels of quoting. - -[General] -# This option exists solely for the purpose of a clean automatic upgrade. -# Do not even think about changing it! -ConfigVersion=2.4 -# List of permanent displays. Displays with a hostname are foreign. A display -# class may be specified separated by an underscore. -# Default is ":0" -StaticServers= -# List of on-demand displays. See StaticServers for syntax. -# Default is "" -ReserveServers= -# VTs to allocate to X-servers. A negative number means that the VT will be -# used only if it is free. If all VTs in this list are used up, the next free -# one greater than the last one in this list will be allocated. -# Default is "" -ServerVTs=-7 -# TTYs (without /dev/) to monitor for activity while in console mode. -# Default is "" -ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6 -# Where KDM should store its PID (do not store if empty). -# Default is "" -PidFile=/var/run/kdm.pid -# Whether KDM should lock the PID file to prevent having multiple KDM -# instances running at once. Do not change unless you are brave. -# Default is true -#LockPidFile=false -# Where to store authorization files. -# Default is "/var/run/xauth" -#AuthDir=/tmp -# Whether KDM should automatically re-read configuration files, if it -# finds them having changed. -# Default is true -#AutoRescan=false -# Additional environment variables KDM should pass on to all programs it runs. -# LD_LIBRARY_PATH and XCURSOR_THEME are good candidates; -# otherwise, it should not be necessary very often. -# Default is "" -#ExportList=LD_LIBRARY_PATH,ANOTHER_IMPORTANT_VAR -# A character device KDM should read entropy from. -# Empty means use the system's preferred entropy device. -# Default is "" -#RandomDevice=/dev/altrandom -# Where the command sockets should be created; make it empty to disable -# them. -# Default is "/var/run/xdmctl" -#FifoDir=/tmp -# The group to which the global command socket should belong; -# can be either a name or a numerical ID. -# Default is 0 -#FifoGroup=xdmctl -# The directory in which KDM should store persistent working data. -# Default is "/var/lib/kdm" -##DataDir= -DataDir=/var/lib/kdm-4.4 -# The directory in which KDM should store users' .dmrc files. This is only -# needed if the home directories are not readable before actually logging in -# (like with AFS). -# Default is "" -#DmrcDir=/nfs-shared/var/dmrcs - -[Xdmcp] -# Whether KDM should listen to incoming XDMCP requests. -# Default is true -Enable=true -# The UDP port on which KDM should listen for XDMCP requests. Do not change. -# Default is 177 -Port=177 -# File with the private keys of X-terminals. Required for XDM authentication. -# Default is "" -#KeyFile=/usr/share/config/kdm/kdmkeys -# XDMCP access control file in the usual XDM-Xaccess format. -# Default is "/usr/share/config/kdm/Xaccess" -#Xaccess= -# Number of seconds to wait for display to respond after the user has -# selected a host from the chooser. -# Default is 15 -#ChoiceTimeout=10 -# Strip domain name from remote display names if it is equal to the local -# domain. -# Default is true -#RemoveDomainname=false -# Use the numeric IP address of the incoming connection on multihomed hosts -# instead of the host name. -# Default is false -#SourceAddress=true -# The program which is invoked to dynamically generate replies to XDMCP -# DirectQuery or BroadcastQuery requests. -# If empty, no program is invoked and "Willing to manage" is sent. -# Default is "" -Willing=/usr/share/config/kdm/Xwilling - -[Shutdown] -# The command (subject to word splitting) to run to halt the system. -# Default is "/sbin/halt" -#HaltCmd= -# The command (subject to word splitting) to run to reboot the system. -# Default is "/sbin/reboot" -#RebootCmd= -# Whether it is allowed to shut down the system via the global command socket. -# Default is false -#AllowFifo=true -# Whether it is allowed to abort active sessions when shutting down the -# system via the global command socket. -# Default is true -#AllowFifoNow=false -# The boot manager KDM should use for offering boot options in the -# shutdown dialog. -# "None" - no boot manager -# "Grub" - Grub boot manager -# "Lilo" - Lilo boot manager (Linux on i386 & x86-64 only) -# Default is None -#BootManager=Grub - -# Rough estimations about how many seconds KDM will spend at most on -# - opening a connection to the X-server (OpenTime) if the attempt -# - times out: OpenTimeout -# - is refused: OpenRepeat * OpenDelay -# - starting a local X-server (ServerTime): -# ServerAttempts * (ServerTimeout + OpenDelay) -# - starting a display: -# - local display: ServerTime + OpenTime -# - foreign display: StartAttempts * OpenTime -# - XDMCP display: OpenTime (repeated indefinitely by client) - -# Core config for all displays -[X-*-Core] -# How long to wait before retrying to connect a display. -# Default is 15 -#OpenDelay=15 -# How long to wait before timing out a display connection attempt. -# Default is 120 -#OpenTimeout=120 -# How many connection attempts to make during a start attempt. Note that -# a timeout aborts the entire start attempt. -# Default is 5 -#OpenRepeat=5 -# Try at most that many times to start a display. If this fails, the display -# is disabled. -# Default is 4 -#StartAttempts=4 -# Ping remote display every that many minutes. -# Default is 5 -#PingInterval=5 -# Wait for a Pong that many minutes. -# Default is 5 -#PingTimeout=5 -# The name of this X-server's Xauth file. -# If empty, a random name in the AuthDir directory will be used. -# Default is "" -#AuthFile= -# Specify a file with X-resources for the greeter, chooser and background. -# The KDE frontend does not use this file, so you do not need it unless you -# use another background generator than krootimage. -# Default is "" -#Resources= -# The xrdb program to use to read the above specified recources. -# Subject to word splitting. -# Default is "/usr/bin/xrdb" -#Xrdb= -# A program to run before the greeter is shown. Can be used to start an -# xconsole or an alternative background generator. Subject to word splitting. -# Default is "" -Setup=/usr/share/config/kdm/Xsetup -# A program to run before a user session starts. Subject to word splitting. -# Default is "" -Startup=/usr/share/config/kdm/Xstartup -# A program to run after a user session exits. Subject to word splitting. -# Default is "" -Reset=/usr/share/config/kdm/Xreset -# The program which is run as the user which logs in. It is supposed to -# interpret the session argument (see SessionsDirs) and start an appropriate -# session according to it. Subject to word splitting. -# Default is "/usr/bin/xterm -ls -T" -Session=/usr/share/config/kdm/Xsession -# The program to run if Session fails. -# Default is "/usr/bin/xterm" -#FailsafeClient= -# The PATH for the Session program. -# Default is "/usr/local/bin:/usr/bin:/bin:/usr/games" -#UserPath= -# The PATH for Setup, Startup and Reset, etc. -# Default is "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" -#SystemPath= -# The default system shell. -# Default is "/bin/sh" -#SystemShell=/bin/bash -# Where to put the user's X-server authorization file if ~/.Xauthority -# cannot be created. -# Default is "/tmp" -#UserAuthDir= -# If true, UserAuthDir will be used unconditionally. -# Default is false -#ForceUserAuthDir=true -# Whether to automatically restart sessions after X-server crashes. -# Note that enabling this makes circumventing screen lockers other than -# KDE's built-in one possible! -# Default is false -#AutoReLogin=true -# Allow root logins? -# Default is true -AllowRootLogin=false -# Allow to log in, when user has set an empty password? -# Default is true -AllowNullPasswd=false -# Who is allowed to shut down the system. This applies both to the -# greeter and to the command sockets. -# "None" - no "Shutdown..." menu entry is shown at all -# "Root" - the root password must be entered to shut down -# "All" - everybody can shut down the machine -# Default is All -AllowShutdown=Root -# Who is allowed to abort active sessions when shutting down. -# "None" - no forced shutdown is allowed at all -# "Root" - the root password must be entered to shut down forcibly -# "All" - everybody can shut down the machine forcibly -# Default is All -#AllowSdForceNow=Root -# The default choice for the shutdown condition/timing. -# "Schedule" - shut down after all active sessions exit (possibly at once) -# "TryNow" - shut down, if no active sessions are open; otherwise, do nothing -# "ForceNow" - shut down unconditionally -# Default is Schedule -#DefaultSdMode=ForceNow -# How to offer shutdown scheduling options: -# "Never" - not at all -# "Optional" - as a button in the simple shutdown dialogs -# "Always" - instead of the simple shutdown dialogs -# Default is Never -#ScheduledSd=Optional -# The directories containing session type definitions in .desktop format, -# ordered by falling priority. -# Default is "/usr/share/apps/kdm/sessions" -#SessionsDirs=/usr/share/config/kdm/sessions,/usr/share/apps/kdm/sessions -SessionsDirs=/usr/share/xsessions -# The file (relative to $HOME) to redirect the session output to. The -# following character pairs are replaced: -# - %d -> current display -# - %u -> current user -# - %r -> empty at first. See below. -# - %% -> a single % -# When the constructed filename cannot be used safely and the specification -# contains %r, other names will be tried - this time expanding %r -# to followed by a random number. -# Default is ".xsession-errors" -ClientLogFile=.xsession-errors-%d -# Fallback when ClientLogFile cannot be used. The same expansions are -# supported. DO NOT use relative paths here. -# Default is "/tmp/xerr-%u-%d%-r" -#ClientLogFallback=/var/log/xsession-errors/%u-%d%-r -# Whether KDM's built-in utmp/wtmp/lastlog registration should be used. -# Default is true -#UseSessReg=false - -# Greeter config for all displays -[X-*-Greeter] -# Specify the widget style for the greeter. Empty means to use the -# built-in default which currently is "Oxygen-air". -# Default is "" -#GUIStyle=Plastique -# Specify the widget color scheme for the greeter. Empty means to use the -# built-in default which currently is "Oxygen-air". -# Default is "" -#ColorScheme=MidnightMeadow -# What should be shown in the greeter's logo are: -# "None" - nothing -# "Logo" - the image specified by LogoPixmap -# "Clock" - a neat analog clock -# Default is Clock -LogoArea=Logo -# The image to show when LogoArea=Logo. -# Default is "" -LogoPixmap=/usr/share/apps/kdm/pics/kdelogo.png -# The relative coordinates (X,Y in percent) of the center of the greeter. -# Default is "50,50" -#GreeterPos=30,40 -# The screen the greeter should be displayed on in multi-headed and Xinerama -# setups. The numbering starts with 0. For Xinerama, it corresponds to the -# listing order in the active ServerLayout section of XF86Config; -1 means -# to use the upper-left screen, -2 means to use the upper-right screen. -# Default is 0 -#GreeterScreen=-1 -# The headline in the greeter. The following character pairs are replaced: -# - %d -> current display -# - %h -> host name, possibly with domain name -# - %n -> node name, most probably the host name without domain name -# - %s -> the operating system -# - %r -> the operating system's version -# - %m -> the machine (hardware) type -# - %% -> a single % -# Default is "Welcome to %s at %n" -#GreetString=K Desktop Environment (%n) -# Whether the fonts used in the greeter should be antialiased. -# Default is false -#AntiAliasing=true -# The font for the greeter headline. -# Default is "Serif,20,bold" -#GreetFont=Serif,20,5,0,50,0 -# The normal font used in the greeter. -# Default is "Sans Serif,10" -#StdFont=Sans Serif,10,5,0,50,0 -# The font used for the "Login Failed" message. -# Default is "Sans Serif,10,bold" -#FailFont=Sans Serif,10,5,0,75,0 -# What to do with the Num Lock modifier for the time the greeter is running: -# "Off" - turn off -# "On" - turn on -# "Keep" - do not change the state -# Default is Keep -#NumLock=Off -# Language and locale to use in the greeter, encoded like $LANGUAGE. -# If empty, the settings from the environment are used. -# Default is "" -#Language=de_DE -# Enable autocompletion in the username line edit. -# Default is false -#UserCompletion=true -# Enable user list (names along with images) in the greeter. -# Default is true -#UserList=false -# User selection for UserCompletion and UserList: -# "NotHidden" - all users except those listed in HiddenUsers -# "Selected" - only the users listed in SelectedUsers -# Default is NotHidden -#ShowUsers=Selected -# For ShowUsers=Selected. @ means all users in that group. -# Default is "" -#SelectedUsers=root,johndoe -# For ShowUsers=NotHidden. @ means all users in that group. -# Default is "" -#HiddenUsers=root -# Special case of HiddenUsers: users with a non-zero UID less than this number -# will not be shown as well. -# Default is 0 -MinShowUID=1000 -# Complement to MinShowUID: users with a UID greater than this number will -# not be shown as well. -# Default is 65535 -MaxShowUID=65000 -# If false, the users are listed in the order they appear in /etc/passwd. -# If true, they are sorted alphabetically. -# Default is true -#SortUsers=false -# Specify, where the users' pictures should be taken from. -# "AdminOnly" - from /$USER.face[.icon] -# "PreferAdmin" - prefer , fallback on $HOME -# "PreferUser" - ... and the other way round -# "UserOnly" - from the user's $HOME/.face[.icon] -# Default is AdminOnly -#FaceSource=PreferUser -# The directory containing the user images if FaceSource is not UserOnly. -# Default is "/usr/share/apps/kdm/faces" -##FaceDir=/usr/share/faces -FaceDir=/var/lib/kdm-4.4/faces -# Specify, if/which user should be preselected for log in. -# "None" - do not preselect any user -# "Previous" - the user which successfully logged in last time -# "Default" - the user specified in the DefaultUser option -# Default is None -#PreselectUser=Previous -# If this is true, the password input line is focused automatically if -# a user is preselected. -# Default is false -#FocusPasswd=true -# If this is true, the entered password is echoed as bullets. Otherwise, -# no feedback is given at all. -# Default is true -#EchoPasswd=false -# If true, krootimage will be automatically started by KDM; otherwise, the -# Setup script should be used to setup the background. -# Default is true -#UseBackground=false -# The configuration file to be used by krootimage. -# Default is "/usr/share/config/kdm/backgroundrc" -#BackgroundCfg= -# Whether to grab keyboard and mouse while the greeter is visible. Grabs -# may improve security, but make on-screen keyboards, etc. unusable. -# "Never" - never grab -# "IfNoAuth" - grab if the display requires no X authorization -# "Always" - always grab -# Default is IfNoAuth -#GrabInput=Always -# Hold the X-server grabbed the whole time the greeter is visible. This -# may be more secure, but it will disable any background and other -# X-clients started from the Setup script. -# Default is false -#GrabServer=true -# How many seconds to wait for grab to succeed. -# Default is 3 -#GrabTimeout=3 -# Warn, if display has no X-authorization (local auth cannot be created, -# XDMCP display wants no auth, or display is foreign from StaticServers). -# Default is true -#AuthComplain=false -# Random seed for forging saved session types, etc. of unknown users. -# This value should be random but constant across the login domain. -# Default is 0 -ForgingSeed=1277780988 -# Specify conversation plugins for the login dialog. Each plugin can be -# specified as a base name (which expands to $kde_modulesdir/kgreet_$base) -# or as a full pathname. -# Default is "classic" -#PluginsLogin=sign -# Same as PluginsLogin, but for the shutdown dialog. -# Default is "classic" -#PluginsShutdown=modern -# A list of options of the form Key=Value. The conversation plugins can query -# these settings; it is up to them what possible keys are. -# Default is "" -#PluginOptions=SomeKey=randomvalue,Foo=bar -# Show the "Console Login" action in the greeter (if ServerTTY/ConsoleTTYs -# is configured). -# Default is true -#AllowConsole=false -# A program to run while the greeter is visible. It is supposed to preload -# as much as possible of the session that is going to be started (most -# probably). -# Default is "" -Preloader=/usr/bin/preloadkde -# Whether the greeter should be themed. -# Default is false -UseTheme=true -# The theme to use for the greeter. Can point to either a directory or an XML -# file. -# Default is "" -Theme=/usr/share/apps/kdm/themes/oxygen-air - -# Core config for local displays -[X-:*-Core] -# How often to try to run the X-server. Running includes executing it and -# waiting for it to come up. -# Default is 1 -#ServerAttempts=1 -# How long to wait for a local X-server to come up. -# Default is 15 -ServerTimeout=30 -# The command line to start the X-server, without display number and VT spec. -# This string is subject to word splitting. -# Default is "/usr/bin/X" -ServerCmd=/usr/bin/X -# Additional arguments for the X-servers for local sessions. -# This string is subject to word splitting. -# Default is "" -ServerArgsLocal=-nolisten tcp -# Additional arguments for the X-servers for remote sessions. -# This string is subject to word splitting. -# Default is "" -#ServerArgsRemote= -# Restart instead of resetting the local X-server after session exit. -# Use it if the server leaks memory etc. -# Default is false -TerminateServer=true -# The signal needed to reset the local X-server. -# Default is 1 (SIGHUP) -#ResetSignal=1 -# The signal needed to terminate the local X-server. -# Default is 15 (SIGTERM) -#TermSignal=15 -# Create X-authorizations for local displays. -# Default is true -#Authorize=false -# Which X-authorization mechanisms should be used. -# Default is "MIT-MAGIC-COOKIE-1" -#AuthNames= -# Need to reset the X-server to make it read initial Xauth file. -# Default is false -#ResetForAuth=true -# See above -AllowNullPasswd=true -# See above -AllowShutdown=All -# Enable password-less logins on this display. USE WITH EXTREME CARE! -# Default is false -#NoPassEnable=true -# The users that do not need to provide a password to log in. NEVER list root! -# "*" means all non-root users. @ means all users in that group. -# Default is "" -#NoPassUsers=fred,ethel - -# Greeter config for local displays -[X-:*-Greeter] -# See above -PreselectUser=Previous -# See above -FocusPasswd=true -# Specify whether the greeter of local displays should start up in host chooser -# (remote) or login (local) mode and whether it is allowed to switch to the -# other mode. -# "LocalOnly" - only local login possible -# "DefaultLocal" - start up in local mode, but allow switching to remote mode -# "DefaultRemote" - ... and the other way round -# "RemoteOnly" - only choice of remote host possible -# Default is LocalOnly -LoginMode=DefaultLocal -# A list of hosts to be automatically added to the remote login menu. The -# special name "*" means broadcast. -# Default is "*" -#ChooserHosts=*,ugly,sky,dino,kiste.local,login.crap.com -# Show the "Restart X Server"/"Close Connection" action in the greeter. -# Default is true -AllowClose=false - -# Core config for 1st local display -[X-:0-Core] -# The VT the X-server should run on; auto-assign if zero, don't assign if -1. -# Better leave it zero and use ServerVTs. -# Default is 0 -#ServerVT=7 -# Enable automatic login. USE WITH EXTREME CARE! -# Default is false -#AutoLoginEnable=true -# If true, auto-login after logout. If false, auto-login is performed only -# when a display session starts up. -# Default is false -#AutoLoginAgain=true -# The delay in seconds before automatic login kicks in. -# Default is 0 -#AutoLoginDelay=10 -# The user to log in automatically. NEVER specify root! -# Default is "" -#AutoLoginUser=fred -# The password for the user to log in automatically. This is NOT required -# unless the user is logged into a NIS or Kerberos domain. If you use this -# option, you should "chmod 600 kdmrc" for obvious reasons. -# Default is "" -#AutoLoginPass=secret! -# Immediately lock the automatically started session. This works only with -# KDE sessions. -# Default is false -#AutoLoginLocked=true -# See above -ClientLogFile=.xsession-errors - -# Greeter config for 1st local display -[X-:0-Greeter] -# See above -#PreselectUser=Default -# The user to preselect if PreselectUser=Default. -# Default is "" -#DefaultUser=johndoe diff --git a/appliances/kde/knotifyrc b/appliances/kde/knotifyrc deleted file mode 100644 index 1a74bdf..0000000 --- a/appliances/kde/knotifyrc +++ /dev/null @@ -1,10 +0,0 @@ -[Misc] -LastConfiguredApp=Accessibility - -[Phonon::AudioOutput] -KNotify_Volume=1 - -[Sounds] -No sound=true -Use external player=false -Volume=100 diff --git a/appliances/kde/make.conf b/appliances/kde/make.conf deleted file mode 100644 index c7cab6f..0000000 --- a/appliances/kde/make.conf +++ /dev/null @@ -1,5 +0,0 @@ -PYTHON_TARGETS="python2_7" -PYTHON_SINGLE_TARGET="python2_7" - -# Settings for KDE -USE="$USE qt3support qt4 qt5 xcomposite opengl" diff --git a/appliances/kde/package.use b/appliances/kde/package.use deleted file mode 100644 index 9bd5ad1..0000000 --- a/appliances/kde/package.use +++ /dev/null @@ -1,63 +0,0 @@ -app-editors/nano ncurses -dev-lang/python ssl threads xml -dev-util/pkgconfig internal-glib -mail-mta/ssmtp mta -net-misc/dhcp client -net-misc/openssh ssl -net-misc/wget ssl -sys-apps/hwids udev -sys-apps/kmod openrc tools -sys-apps/openrc netifrc -sys-auth/pambase nullok sha512 -sys-devel/gcc cxx nptl -sys-fs/udev openrc -sys-kernel/gentoo-sources symlink - -# per kde -app-arch/libarchive bzip2 -app-crypt/qca openssl -app-misc/strigi dbus -app-office/akonadi-server soprano sqlite -app-text/poppler utils -dev-libs/boost threads -dev-libs/libpcre pcre16 -dev-libs/libxml2 python -dev-libs/soprano dbus raptor redland virtuoso -dev-libs/xmlrpc-c curl -dev-python/PyQt4 X dbus declarative sql svg webkit -dev-qt/qt3support accessibility kde -dev-qt/qtcore exceptions glib icu qt3support ssl -dev-qt/qtdeclarative qt3support accessibility -dev-qt/qtdeclarative widgets -dev-qt/qtgui accessibility dbus glib jpeg mng qt3support xcb -dev-qt/qtnetwork ssl -dev-qt/qtopengl qt3support -dev-qt/qtquickcontrols widgets -dev-qt/qtsql qt3support mysql -dev-qt/qtsvg accessibility -dev-qt/qtwebkit kde -kde-base/kdelibs crypt opengl semantic-desktop -kde-base/kwin opengl -kde-frameworks/karchive bzip2 lzma -kde-frameworks/kauth policykit -kde-frameworks/kdelibs4support X -kde-frameworks/kwindowsystem X -kde-plasma/kinfocenter X -media-libs/gd png -media-libs/mesa egl gbm wayland -media-libs/phonon gstreamer -media-libs/xine-lib vorbis xcb -media-plugins/gst-plugins-meta ogg vorbis -net-misc/curl ssl -net-print/cups dbus -sys-apps/dbus X -sys-auth/consolekit policykit -sys-block/parted device-mapper -sys-fs/lvm2 udev -sys-fs/udev extras hwdb gudev -sys-libs/zlib minizip -virtual/udev hwdb gudev -x11-libs/cairo X svg -x11-libs/cairo glib -x11-libs/libxcb xkb -x11-libs/libxkbcommon X diff --git a/appliances/kde/world b/appliances/kde/world deleted file mode 100644 index a6c155b..0000000 --- a/appliances/kde/world +++ /dev/null @@ -1,3 +0,0 @@ -kde-plasma/plasma-meta -media-fonts/dejavu -media-fonts/freefont