17106 lines
609 KiB
Plaintext
17106 lines
609 KiB
Plaintext
-- **********************************************************
|
|
-- Airespace Wireless MIB
|
|
-- Copyright 2005, 2010 Cisco Systems Inc. All rights reserved.
|
|
--
|
|
-- This SNMP Management Information Specification
|
|
-- embodies Cisco's confidential and proprietary
|
|
-- intellectual property. Cisco retains all title
|
|
-- and ownership in the Specification including any revisions.
|
|
--
|
|
-- This Specification is supplied "AS IS", Cisco
|
|
-- makes no warranty, either expressed or implied,
|
|
-- as to the use, operation, condition, or performance of the
|
|
-- Specification.
|
|
--
|
|
|
|
-- Status: Release
|
|
-- Version: 4.0
|
|
-- Internal Source Code Version:1.268
|
|
-- Date: 01 Jan 2006
|
|
-- **********************************************************
|
|
|
|
|
|
|
|
AIRESPACE-WIRELESS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
Integer32,
|
|
Counter32,
|
|
Unsigned32,
|
|
Counter64,
|
|
Gauge32,
|
|
IpAddress,
|
|
TimeTicks
|
|
FROM SNMPv2-SMI
|
|
NOTIFICATION-GROUP,
|
|
OBJECT-GROUP,
|
|
MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION,
|
|
DisplayString,
|
|
RowStatus,
|
|
MacAddress,
|
|
TruthValue,
|
|
TimeInterval
|
|
FROM SNMPv2-TC
|
|
airespace
|
|
FROM AIRESPACE-REF-MIB;
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * MODULE IDENTITY
|
|
-- ********************************************************************
|
|
|
|
bsnWireless MODULE-IDENTITY
|
|
LAST-UPDATED "201002090000Z"
|
|
ORGANIZATION "Airespace, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems,
|
|
Customer Service
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-wnbu-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on all those
|
|
devices operating as Central Controllers (CC) that
|
|
terminate the Light Weight Access Point Protocol
|
|
tunnel from Light-weight LWAPP Access Points.
|
|
|
|
This MIB provides configuration and status information
|
|
for 802.11 Access Points, LAN configuration, AAA,
|
|
Mobility, IpSec, Radio Rescouce Management and 802.11
|
|
global parameters.
|
|
|
|
The relationship between controller and the LWAPP
|
|
APs can be depicted as follows:
|
|
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ CC + + CC + + CC + + CC +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
.. . . .
|
|
.. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ AP + + AP + + AP + + AP + + AP +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ MN + + MN + + MN + + MN + + MN +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
|
|
|
|
The LWAPP tunnel exists between the controller and
|
|
the APs. The MNs communicate with the APs through
|
|
the protocol defined by the 802.11 standard.
|
|
|
|
LWAPP APs, upon bootup, discover and join one of the
|
|
controllers and the controller pushes the configuration,
|
|
that includes the WLAN parameters, to the LWAPP APs.
|
|
The APs then encapsulate all the 802.11 frames from
|
|
wireless clients inside LWAPP frames and forward
|
|
the LWAPP frames to the controller.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
LWAPP APs encapsulate all the 802.11 frames in
|
|
LWAPP frames and sends it to the controller to which
|
|
it is logically connected.
|
|
|
|
Basic Service Set Identifier (BSSID)
|
|
|
|
The identifier for the service set comprising of
|
|
all the 802.11 stations under the control of
|
|
one coordinating Access Point. This identifier
|
|
happens to be the MAC address of the dot11 radio
|
|
interface of the Access Point. The wireless
|
|
clients that associate with the Access Point
|
|
get the wired uplink through this particular
|
|
dot11 interface.
|
|
|
|
Central Controller ( CC )
|
|
|
|
The central entity that terminates the LWAPP protocol
|
|
tunnel from the LWAPP APs. Throughout this MIB,
|
|
this entity also referred to as 'controller'.
|
|
|
|
Light Weight Access Point Protocol ( LWAPP )
|
|
|
|
This is a generic protocol that defines the
|
|
communication between the Access Points and the
|
|
Central Controller.
|
|
|
|
Mobile Node ( MN )
|
|
|
|
A roaming 802.11 wireless device in a wireless
|
|
network associated with an access point.
|
|
|
|
Station Management (SMT)
|
|
|
|
This term refers to the internal management of the
|
|
802.11 protocol operations by the AP to work
|
|
cooperatively with the other APs and 802.11
|
|
devices in the network.
|
|
|
|
REFERENCE
|
|
|
|
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
|
|
and Physical Layer ( PHY ) Specifications.
|
|
|
|
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
|
|
Weight Access Point Protocol."
|
|
REVISION "201002090000Z"
|
|
DESCRIPTION
|
|
"Updated:-
|
|
bsnDot11EssStaticWEPEncryptionType,
|
|
bsnDot11Ess8021xEncryptionType,
|
|
bsnMobileStationReasonCode,
|
|
bsnMobileStationProtocol,
|
|
bsnRogueAPRadioType,
|
|
bsnRogueAPAirespaceAPPreamble,
|
|
bsnAPMonitorOnlyMode,
|
|
bsnAPType,
|
|
bsnAPIfPhyChannelNumber,
|
|
bsnAPIfSniffChannel,
|
|
bsnRogueLocationDiscoveryProtocol,
|
|
bsnAPAuthCertificateType,
|
|
bsnStationReasonCode,
|
|
bsnAPAuthorizationFailureCause
|
|
bsnAPIfUpDownCause
|
|
|
|
Added:-
|
|
bsnRogueAPDetectingAPRadioType,
|
|
bsnRogueAPDetectingAPMacAddress,
|
|
bsnRogueAPMaxRssiRadioType,
|
|
bsnRogueAPClassType,
|
|
bsnRogueAPChannel,
|
|
bsnRogueAPDetectingAPName,
|
|
bsnRogueAPChannelWidth,
|
|
bsnAPIfRxNeighborChannel,
|
|
bsnAPIfRxNeighborChannelWidth,
|
|
bsnStandardSignatureInterval,
|
|
bsnCustomSignatureInterval,
|
|
bsnImpersonatingSourceMacAddr,
|
|
bsnAPPreviousChannelNumberTrapVariable,
|
|
bsnAPReasonCodeTrapVariable,
|
|
bsnNoiseBeforeChannelUpdate,
|
|
bsnNoiseAfterChannelUpdate,
|
|
bsnInterferenceBeforeChannelUpdate,
|
|
bsnInterferenceAfterChannelUpdate,
|
|
bsnPingTestMaxTimeInterval,
|
|
bsnPingTestMinTimeInterval,
|
|
bsnPingTestAvgTimeInterval,
|
|
bsnDot11StationDisassociate,
|
|
bsnDot11StationDeauthenticate,
|
|
bsnDot11StationAuthenticateFail,
|
|
bsnDot11StationAssociateFail,
|
|
bsnAPIfUp,
|
|
bsnAPIfDown,
|
|
bsnAPLoadProfileFailed,
|
|
bsnAPNoiseProfileFailed,
|
|
bsnAPInterferenceProfileFailed,
|
|
bsnAPCoverageProfileFailed,
|
|
bsnAPCurrentTxPowerChanged,
|
|
bsnAPCurrentChannelChanged,
|
|
bsnRogueAPDetected,
|
|
bsnAPLoadProfileUpdatedToPass,
|
|
bsnAPNoiseProfileUpdatedToPass,
|
|
bsnAPInterferenceProfileUpdatedToPass,
|
|
bsnAPCoverageProfileUpdatedToPass,
|
|
bsnApMaxRogueCountExceeded,
|
|
bsnApMaxRogueCountClear,
|
|
bsnDot11StationBlacklisted,
|
|
bsnDot11StationAssociate,
|
|
bsnApBigNavDosAttack,
|
|
bsnWpaMicErrorCounterActivated,
|
|
bsnRogueAPDetectedOnWiredNetwork,
|
|
bsnApHasNoRadioCards,
|
|
bsnDuplicateIpAddressReported,
|
|
bsnAPContainedAsARogue,
|
|
bsnAPRadioCardTxFailure,
|
|
bsnAPRadioCardTxFailureClear,
|
|
bsnAPRadioCardRxFailure,
|
|
bsnAPRadioCardRxFailureClear,
|
|
bsnAPImpersonationDetected,
|
|
bsnAPIPAddressFallback,
|
|
bsnRadarChannelDetected,
|
|
bsnRadarChannelCleared,
|
|
radioCoreDumpTrap,
|
|
invalidRadioTrap,
|
|
bsnEssGroup1,
|
|
bsnGlobalDot11Group1,
|
|
bsnAAAGroup1,
|
|
bsnTrapsGroupRev1,
|
|
bsnWrasObsGroup1,
|
|
bsnWrasTrapRev1,
|
|
bsnApGroupRev1,
|
|
bsnUtilityGroupRev1,
|
|
bsnWrasComplianceRev1
|
|
|
|
Obsoleted:-
|
|
bsnMobileStationExtStatsTable,
|
|
bsnSystemTimezoneDaylightSavings,
|
|
bsnAPUp,
|
|
bsnAPDown,
|
|
bsnWrasObsTrap,
|
|
bsnWrasTrap,
|
|
|
|
Deprecated:-
|
|
bsnGlobalDot11CountryIndex,
|
|
bsnGlobalDot11LoadBalancing,
|
|
bsnGlobalDot11bMaximumTransmitPowerLevel,
|
|
bsnGlobalDot11bFirstChannelNumber,
|
|
bsnGlobalDot11bNumberofChannels,
|
|
bsnGlobalDot11aMaximumTransmitPowerLevel,
|
|
bsnGlobalDot11aFirstChannelNumber,
|
|
bsnGlobalDot11aNumberofChannels,
|
|
bsnRadiusAuthCacheCredentialsLocally,
|
|
bsnAPGroupsVlanMappingTable,
|
|
bsnAPAssociated,
|
|
bsnAPRegulatoryDomainMismatch,
|
|
countryChangeTrap,
|
|
bsnEssGroup,
|
|
bsnApGroup,
|
|
bsnGlobalDot11Group,
|
|
bsnAAAGroup,
|
|
bsnTrapsGroup,
|
|
bsnUtilityGroup,
|
|
bsnWrasCompliance"
|
|
REVISION "200604100000Z"
|
|
DESCRIPTION
|
|
"Updated MIB with description and format"
|
|
REVISION "200510300000Z"
|
|
DESCRIPTION
|
|
"Airespace MIB"
|
|
::= { airespace 2 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Major sections
|
|
-- *******************************************************************
|
|
--
|
|
|
|
-- Airespace Wireless LAN Configuration Attributes
|
|
-- DEFINED AS "The bsnEss object provides all the
|
|
-- configuration and operation of Wireless LAN";
|
|
|
|
bsnEss OBJECT IDENTIFIER
|
|
::= { bsnWireless 1 }
|
|
|
|
-- Airespace AP Attributes
|
|
-- DEFINED AS "The bsnAP object provides all the
|
|
-- configuration and operation of Airespace APs that
|
|
-- are associated with the Switch";
|
|
|
|
bsnAP OBJECT IDENTIFIER
|
|
::= { bsnWireless 2 }
|
|
|
|
-- Airespace 802.11 Standard Attributes applied Globally
|
|
-- DEFINED AS "The bsnGlobalDot11 object class provides support for
|
|
-- standard 802.11 parameters for STM,MAC,RES,PHY which would be common
|
|
-- to all WLAN on Airespace"
|
|
|
|
bsnGlobalDot11 OBJECT IDENTIFIER
|
|
::= { bsnWireless 3 }
|
|
|
|
-- Airespace Radio Resource Management Configuration Parameters
|
|
-- DEFINED AS "The bsnRrm object provides all the
|
|
-- configuration and monitoring of RF Group parameters ";
|
|
|
|
bsnRrm OBJECT IDENTIFIER
|
|
::= { bsnWireless 4 }
|
|
|
|
-- Airespace Authentication, Authorization, and Accounting Attributes
|
|
-- DEFINED AS "The bsnAaa object class provides all standard
|
|
-- information to support configuration of RADIUS and TACACS+
|
|
-- client operation.";
|
|
|
|
bsnAAA OBJECT IDENTIFIER
|
|
::= { bsnWireless 5 }
|
|
|
|
-- Airespace Trap Configuration and Trap definition
|
|
-- DEFINED AS "The bsnTrap object class provides all notification that
|
|
-- Switch need to generate for Management System. It also provides to
|
|
-- configure generation of notification.
|
|
|
|
bsnTrap OBJECT IDENTIFIER
|
|
::= { bsnWireless 6 }
|
|
|
|
-- Airespace General Utilities
|
|
-- DEFINED AS "The bsnUtility object class provides utilities like
|
|
-- Ping, LinkTest, Syslog that are supported by the Switch
|
|
|
|
bsnUtility OBJECT IDENTIFIER
|
|
::= { bsnWireless 7 }
|
|
|
|
-- Airespace Mobility Group Parameters
|
|
-- DEFINED AS "The bsnMobility object class provides configuration
|
|
-- of Mobility Group and Mobility Statistics.
|
|
|
|
bsnMobility OBJECT IDENTIFIER
|
|
::= { bsnWireless 8 }
|
|
|
|
-- Airespace Global IpSec Group
|
|
-- DEFINED AS "The bsnIpsec object class provides configuration
|
|
-- of ID and CA Certificates
|
|
|
|
bsnIpsec OBJECT IDENTIFIER
|
|
::= { bsnWireless 9 }
|
|
|
|
bsnWrasGroups OBJECT IDENTIFIER
|
|
::= { bsnWireless 50 }
|
|
|
|
bsnWrasCompliances OBJECT IDENTIFIER
|
|
::= { bsnWireless 51 }
|
|
|
|
|
|
WEPKeytype ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the WEP Key type."
|
|
SYNTAX OCTET STRING (SIZE (4..32))
|
|
|
|
ProfileState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the profile state."
|
|
SYNTAX INTEGER {
|
|
fail(0),
|
|
pass(1)
|
|
}
|
|
|
|
BsnTxtSignatureMacInfo ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention defines the pattern followed
|
|
by the LWAPP APs to perform signature analysis with
|
|
the signature and report the results to the
|
|
Controller.
|
|
|
|
The semantics are described as follows.
|
|
|
|
bsnSignatureMacAll - The Controller would set the
|
|
'Mac Info' parameter of the 'Signature Add LWAPP
|
|
Message' to this value to indicate the LWAPP AP that
|
|
the signature analysis and pattern matching should
|
|
be tracked and reported on a per-signature and
|
|
per-channel basis.
|
|
|
|
bsnSignatureMacIndividual - The Controller would set
|
|
the 'Mac Info' parameter of the 'Signature Add LWAPP
|
|
Message' to this value to indicate the LWAPP AP that
|
|
the signature analysis and pattern matching should
|
|
be tracked and reported separately for individual
|
|
MAC addresses, that are the sources of the received
|
|
802.11 data and/or management frames.
|
|
|
|
bsnStandardSigMacBoth - The Controller would set the
|
|
'Mac Info' parameter of the 'Signature Add LWAPP
|
|
Message' to this value to indicate the LWAPP AP that
|
|
the signature analysis and pattern matching should
|
|
be tracked on a per signature as well as per-MAC
|
|
address basis."
|
|
SYNTAX INTEGER {
|
|
bsnSignatureMacAll(0),
|
|
bsnSignatureMacIndividual(1),
|
|
bsnSignatureMacBoth(2)
|
|
}
|
|
|
|
BsnSignaturePatternOffSetStart ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates how an offset should be applied
|
|
while doing signature analysis for QOS and non-QOS
|
|
data frames. This is introduced since 802.11e QOS
|
|
frames have an additional 2-byte QOS header which
|
|
results in the current implementation not being
|
|
able to find the start of the date frames for
|
|
signature analysis. The semantics of the values are
|
|
as follows.
|
|
|
|
sigPattStartFrm - This indicates that the
|
|
required offset should be applied to the start of
|
|
the data frame, before performing pattern matching
|
|
of the signature on the data frame.
|
|
|
|
sigPattStartFrmBody - This value indicates
|
|
that the required offset should be applied to the
|
|
start of the frame body, after the header, before
|
|
performing pattern matching of the signature on the
|
|
data frame."
|
|
SYNTAX INTEGER {
|
|
sigPattStartFrm(0),
|
|
sigPattStartFrmBody(1)
|
|
}
|
|
-- ************************************************************
|
|
-- * MIB attribute OBJECT-TYPE definitions follow
|
|
-- ************************************************************
|
|
--
|
|
|
|
-- ***********************************************************
|
|
-- * bsnEss Objects
|
|
-- * Airespace IEEE 802.11 Extended Service Set Table
|
|
-- *
|
|
-- ***********************************************************
|
|
|
|
bsnDot11EssTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnDot11EssEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ess(WLAN) Configuration Table indexed by bsnDot11EssIndex.
|
|
Maximum of 17 WLANs can be created on Airespace Switch.
|
|
bsnDot11EssIndex of 17 is reserved for WLAN for Third Party
|
|
APs(non-Airespace APs)."
|
|
::= { bsnEss 1 }
|
|
|
|
bsnDot11EssEntry OBJECT-TYPE
|
|
SYNTAX BsnDot11EssEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnDot11EssTable"
|
|
INDEX { bsnDot11EssIndex }
|
|
::= { bsnDot11EssTable 1 }
|
|
|
|
BsnDot11EssEntry ::= SEQUENCE {
|
|
bsnDot11EssIndex Unsigned32,
|
|
bsnDot11EssSsid DisplayString,
|
|
bsnDot11EssSessionTimeout Unsigned32,
|
|
bsnDot11EssMacFiltering INTEGER,
|
|
bsnDot11EssAdminStatus INTEGER,
|
|
bsnDot11EssSecurityAuthType INTEGER,
|
|
bsnDot11EssStaticWEPSecurity INTEGER,
|
|
bsnDot11EssStaticWEPEncryptionType INTEGER,
|
|
bsnDot11EssStaticWEPDefaultKey WEPKeytype,
|
|
bsnDot11EssStaticWEPKeyIndex INTEGER,
|
|
bsnDot11EssStaticWEPKeyFormat INTEGER,
|
|
bsnDot11Ess8021xSecurity INTEGER,
|
|
bsnDot11Ess8021xEncryptionType INTEGER,
|
|
bsnDot11EssWPASecurity INTEGER,
|
|
bsnDot11EssWPAEncryptionType INTEGER,
|
|
bsnDot11EssIpsecSecurity INTEGER,
|
|
bsnDot11EssVpnEncrTransform INTEGER,
|
|
bsnDot11EssVpnAuthTransform INTEGER,
|
|
bsnDot11EssVpnIkeAuthMode INTEGER,
|
|
bsnDot11EssVpnSharedKey OCTET STRING,
|
|
bsnDot11EssVpnSharedKeySize Unsigned32,
|
|
bsnDot11EssVpnIkePhase1Mode INTEGER,
|
|
bsnDot11EssVpnIkeLifetime Integer32,
|
|
bsnDot11EssVpnIkeDHGroup INTEGER,
|
|
bsnDot11EssIpsecPassthruSecurity INTEGER,
|
|
bsnDot11EssVpnPassthruGateway IpAddress,
|
|
bsnDot11EssWebSecurity INTEGER,
|
|
bsnDot11EssRadioPolicy INTEGER,
|
|
bsnDot11EssQualityOfService INTEGER,
|
|
bsnDot11EssDhcpRequired INTEGER,
|
|
bsnDot11EssDhcpServerIpAddress IpAddress,
|
|
bsnDot11EssVpnContivityMode INTEGER,
|
|
bsnDot11EssVpnQotdServerAddress IpAddress,
|
|
bsnDot11EssBlacklistTimeout Integer32,
|
|
bsnDot11EssNumberOfMobileStations Counter32,
|
|
bsnDot11EssWebPassthru INTEGER,
|
|
bsnDot11EssCraniteSecurity INTEGER,
|
|
bsnDot11EssBlacklistingCapability INTEGER,
|
|
bsnDot11EssInterfaceName DisplayString,
|
|
bsnDot11EssAclName DisplayString,
|
|
bsnDot11EssAAAOverride INTEGER,
|
|
bsnDot11EssWPAAuthKeyMgmtMode INTEGER,
|
|
bsnDot11EssWPAAuthPresharedKey OCTET STRING,
|
|
bsnDot11EssWepAllowSharedKeyAuth INTEGER,
|
|
bsnDot11EssFortressSecurity INTEGER,
|
|
bsnDot11EssL2tpSecurity INTEGER,
|
|
bsnDot11EssWPAAuthPresharedKeyHex OCTET STRING,
|
|
bsnDot11EssBroadcastSsid INTEGER,
|
|
bsnDot11EssExternalPolicyValidation INTEGER,
|
|
bsnDot11EssRSNSecurity INTEGER,
|
|
bsnDot11EssRSNWPACompatibilityMode INTEGER,
|
|
bsnDot11EssRSNAllowTKIPClients INTEGER,
|
|
bsnDot11EssRSNAuthKeyMgmtMode INTEGER,
|
|
bsnDot11EssRSNAuthPresharedKey OCTET STRING,
|
|
bsnDot11EssRSNAuthPresharedKeyHex OCTET STRING,
|
|
bsnDot11EssIPv6Bridging INTEGER,
|
|
bsnDot11EssRowStatus RowStatus,
|
|
bsnDot11EssWmePolicySetting INTEGER,
|
|
bsnDot11Ess80211ePolicySetting INTEGER,
|
|
bsnDot11EssWebPassthroughEmail INTEGER,
|
|
bsnDot11Ess7920PhoneSupport INTEGER,
|
|
bsnDot11EssRadiusAuthPrimaryServer DisplayString,
|
|
bsnDot11EssRadiusAuthSecondaryServer DisplayString,
|
|
bsnDot11EssRadiusAuthTertiaryServer DisplayString,
|
|
bsnDot11EssRadiusAcctPrimaryServer DisplayString,
|
|
bsnDot11EssRadiusAcctSecondaryServer DisplayString,
|
|
bsnDot11EssRadiusAcctTertiaryServer DisplayString
|
|
}
|
|
|
|
bsnDot11EssIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..517)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the Ess(WLAN) within Airespace Switch.
|
|
Airespace Switch supports 517 ESS(Wlans) so index
|
|
will be from 1 to 517. 517 is to be used for ESS(WLAN)
|
|
created for support of Third Party APs(non-Airespace APs)"
|
|
::= { bsnDot11EssEntry 1 }
|
|
|
|
bsnDot11EssSsid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SSID assigned to ESS(WLAN)"
|
|
::= { bsnDot11EssEntry 2 }
|
|
|
|
bsnDot11EssSessionTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..86400)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum time of a Mobile Station session.
|
|
Value of 0 means infinite time(no timeout set)."
|
|
DEFVAL { 0 }
|
|
::= { bsnDot11EssEntry 4 }
|
|
|
|
bsnDot11EssMacFiltering OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A type of security policy for Mobile Stations
|
|
(Clients). Select to filter clients by MAC address.
|
|
By selecting this Security, you need to create
|
|
MacFilters in bsnUsersTable or have MacFilters
|
|
configured on Radius Servers specified in
|
|
bsnRadiusAuthenticationTable"
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 5 }
|
|
|
|
bsnDot11EssAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administrative Status of ESS(WLAN). By disabling an
|
|
ESS the corresponding SSID is no longer broadcasted
|
|
in AP beacons."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 6 }
|
|
|
|
bsnDot11EssSecurityAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
authOpen(0),
|
|
authSharedKey(1),
|
|
authCiscoLeap(128)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of 802.11 Authentication."
|
|
DEFVAL { authOpen }
|
|
::= { bsnDot11EssEntry 7 }
|
|
|
|
bsnDot11EssStaticWEPSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of Static WEP Security policy. If enabled, WEP
|
|
Encryption WEP Default Key, Key Index and Key Format should
|
|
also be specified."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 8 }
|
|
|
|
bsnDot11EssStaticWEPEncryptionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wep104(0),
|
|
wep40(2),
|
|
wep128(3),
|
|
notset(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of Static WEP Encryption. Length of key specified in
|
|
Default Key depends on this attribute."
|
|
DEFVAL { wep104 }
|
|
::= { bsnDot11EssEntry 9 }
|
|
|
|
bsnDot11EssStaticWEPDefaultKey OBJECT-TYPE
|
|
SYNTAX WEPKeytype
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static WEP Default Key. For wep104 encryption either
|
|
26 bit hex key or 13 bit ascii key should be
|
|
specified. For wep40 encryption 10 bit hex key or 5
|
|
bit ascii key should be specified. For wep128
|
|
encryption 32 bit hex key or 16 bit ascii key should
|
|
be specified."
|
|
::= { bsnDot11EssEntry 10 }
|
|
|
|
bsnDot11EssStaticWEPKeyIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"According to 802.11 standard 4 keys are supported.
|
|
So 802.11 Mobile Stations(Client) can have upto 4
|
|
keys. This index is for informing Mobile Station
|
|
which key it should use for Static WEP Authentication"
|
|
::= { bsnDot11EssEntry 11 }
|
|
|
|
bsnDot11EssStaticWEPKeyFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hex(1),
|
|
ascii(2),
|
|
default(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is not persistant.Reading this attribute will
|
|
always return default. The format of the key specified
|
|
in Airespace switch keeps record of the Index."
|
|
::= { bsnDot11EssEntry 12 }
|
|
|
|
bsnDot11Ess8021xSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of 802.1X security policy."
|
|
DEFVAL { enable }
|
|
::= { bsnDot11EssEntry 13 }
|
|
|
|
bsnDot11Ess8021xEncryptionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wep104(0),
|
|
wep40(2),
|
|
wep128(3),
|
|
none(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of 802.1X Encryption. This applies if
|
|
bsnDot11Ess8021xSecurity is in enabled state."
|
|
DEFVAL { wep104 }
|
|
::= { bsnDot11EssEntry 14 }
|
|
|
|
bsnDot11EssWPASecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Status of WPA security policy.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 16 }
|
|
|
|
bsnDot11EssWPAEncryptionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wep104(0),
|
|
wep40(2),
|
|
wep128(3),
|
|
tkipmic(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Type of WPA Encryption. This applies when
|
|
bsnDot11EssWPASecurity is in enable state.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
DEFVAL { tkipmic }
|
|
::= { bsnDot11EssEntry 17 }
|
|
|
|
bsnDot11EssIpsecSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of IpSec (VPN) security policy. Note that this
|
|
cannot be applied with Web security policy."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 18 }
|
|
|
|
bsnDot11EssVpnEncrTransform OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tripleDes(0),
|
|
none(1),
|
|
des(2),
|
|
aesCbc(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Encryption algorithm employed by this Vpn(IpSec)
|
|
Encryption. This applies only when
|
|
bsnDot11EssIpsecSecurity is in enable state."
|
|
DEFVAL { tripleDes }
|
|
::= { bsnDot11EssEntry 19 }
|
|
|
|
bsnDot11EssVpnAuthTransform OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
hmacMd5(2),
|
|
hmacSha1(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Hash algorithm employed by the Vpn Encrpytion.
|
|
This applies only when bsnDot11EssIpsecSecurity is in
|
|
enable state."
|
|
DEFVAL { hmacSha1 }
|
|
::= { bsnDot11EssEntry 20 }
|
|
|
|
bsnDot11EssVpnIkeAuthMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
xauthEnablePsk(0),
|
|
certificate(2),
|
|
presharedKey(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type of the SA. It could be a
|
|
certificate or a pre-shared key or xauthEnablePsk.
|
|
This applies only when bsnDot11EssIpsecSecurity is
|
|
in enable state."
|
|
DEFVAL { presharedKey }
|
|
::= { bsnDot11EssEntry 21 }
|
|
|
|
bsnDot11EssVpnSharedKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPN Shared Key. This applies only when
|
|
bsnDot11EssVpnSharedKey is in enable state and
|
|
bsnDot11EssVpnIkeAuthMode is xauthEnablePsk or
|
|
presharedKey."
|
|
::= { bsnDot11EssEntry 22 }
|
|
|
|
bsnDot11EssVpnSharedKeySize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPN Shared Key size. This applies only when
|
|
bsnDot11EssVpnSharedKey is in enable state
|
|
and bsnDot11EssVpnIkeAuthMode is xauthEnablePsk or
|
|
presharedKey."
|
|
::= { bsnDot11EssEntry 23 }
|
|
|
|
bsnDot11EssVpnIkePhase1Mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
agressive(0),
|
|
main(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPN IKE Phase 1 Mode type as per the IpSec standards.
|
|
This applies only when bsnDot11EssIpsecSecurity is in
|
|
enable state."
|
|
DEFVAL { main }
|
|
::= { bsnDot11EssEntry 24 }
|
|
|
|
bsnDot11EssVpnIkeLifetime OBJECT-TYPE
|
|
SYNTAX Integer32 (1800..345600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vpn IKE's Lifetime.
|
|
This applies only when bsnDot11EssIpsecSecurity is in
|
|
enable state."
|
|
DEFVAL { 57600 }
|
|
::= { bsnDot11EssEntry 25 }
|
|
|
|
bsnDot11EssVpnIkeDHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
group2(0),
|
|
group1(1),
|
|
group5(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IKE's Diffie-Hellman Group.
|
|
This applies only when bsnDot11EssIpsecSecurity is in
|
|
enable state."
|
|
DEFVAL { group2 }
|
|
::= { bsnDot11EssEntry 26 }
|
|
|
|
bsnDot11EssIpsecPassthruSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of IpSec Passthru security policy."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 27 }
|
|
|
|
bsnDot11EssVpnPassthruGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip address of VpnPassthru Gateway.
|
|
This applies only when bsnDot11EssIpsecPassthruSecurity
|
|
is in enable state."
|
|
DEFVAL { '00000000'H }
|
|
::= { bsnDot11EssEntry 28 }
|
|
|
|
bsnDot11EssWebSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of Web security policy. Note this policy cannot be
|
|
applied with IpSec security policy."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 29 }
|
|
|
|
bsnDot11EssRadioPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(0),
|
|
dot11aOnly(2),
|
|
dot11bOnly(1),
|
|
dot11gOnly(3),
|
|
dot11bgOnly(4),
|
|
dot11agOnly(5),
|
|
dot11abOnly(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio Policy for a WLAN. It can either be All where it
|
|
will be applicable to ALL types of protocols or it can be
|
|
set to apply to combinations of 802.11a, 802.11b, 802.11g."
|
|
DEFVAL { all }
|
|
::= { bsnDot11EssEntry 30 }
|
|
|
|
bsnDot11EssQualityOfService OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bronze(0),
|
|
silver(1),
|
|
gold(2),
|
|
platinum(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Quality of Service for a WLAN.Services such as VoIP should
|
|
be set to Gold while non-discriminating services such as
|
|
messaging can be set to Bronze."
|
|
DEFVAL { bronze }
|
|
::= { bsnDot11EssEntry 31 }
|
|
|
|
bsnDot11EssDhcpRequired OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP required for all clients on this WLAN"
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 32 }
|
|
|
|
bsnDot11EssDhcpServerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Server. Make it 0.0.0.0 to disable
|
|
DHCP Relay. Any value other than 0.0.0.0, it will be
|
|
assumed that DHCP Relay is turned on."
|
|
DEFVAL { '00000000'H }
|
|
::= { bsnDot11EssEntry 33 }
|
|
|
|
bsnDot11EssVpnContivityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies if contivity mode for the IpSec is enabled.
|
|
If enabled, user needs to specify the Quote of the Day
|
|
Server's IPAddress in bsnDot11EssVpnQotdServerAddress."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 34 }
|
|
|
|
bsnDot11EssVpnQotdServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the Quote of the Day Server."
|
|
DEFVAL { '00000000'H }
|
|
::= { bsnDot11EssEntry 35 }
|
|
|
|
bsnDot11EssBlacklistTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the timeout for blacklisted Mobile Stations after
|
|
which the mobile station will be automatically
|
|
de-authenticated. Mobile Station are blacklisted by MAC
|
|
address and their status can be obtained from
|
|
bsnMobileStationStatus.
|
|
A timeout setting of 0 indicates no blacklist timeout is
|
|
set and administrative control
|
|
(bsnMobileStationDeleteAction ) is required to
|
|
deauthenticate the station."
|
|
DEFVAL { 60 }
|
|
::= { bsnDot11EssEntry 37 }
|
|
|
|
bsnDot11EssNumberOfMobileStations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No of Mobile Stations currently associated with the
|
|
WLAN."
|
|
::= { bsnDot11EssEntry 38 }
|
|
|
|
bsnDot11EssWebPassthru OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For switches with version before 2.0: This is applicable
|
|
only when the Web Security Type is enabled. When this
|
|
attribute is enabled, it allows a client's NetBIOS packets
|
|
to go through the switch before web auth is completed.
|
|
|
|
(This is obsolete for Switch versions 2.0 to 2.2).
|
|
|
|
For switch verions 3.0 and above: This is reintroduced as
|
|
the web policy where the client is connected
|
|
through the web without authentication that is there is no
|
|
username/password input required. Moreover, if the
|
|
bsnDot11EssWebPassthroughEmail is enabled, the user will
|
|
be asked to enter an email address."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 39 }
|
|
|
|
bsnDot11EssCraniteSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of Cranite Passthrough Security policy. If enabled,
|
|
no other security can be enabled."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 40 }
|
|
|
|
bsnDot11EssBlacklistingCapability OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the flag that can enable or disable the
|
|
client backlisting feature for a WLAN. If enabled,
|
|
the clients can be blacklisted by the Switch in case
|
|
of repetitive auth failure and other reasons like it.
|
|
If disabled, the clients cannot be blacklisted by
|
|
the switch. The blacklist timeout value will only
|
|
be effective if this feature is turned on."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 41 }
|
|
|
|
bsnDot11EssInterfaceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the interface used by this WLAN. By default it
|
|
is set to be the management interface."
|
|
::= { bsnDot11EssEntry 42 }
|
|
|
|
bsnDot11EssAclName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of ACL for the WLAN. This is applicable only when
|
|
Web Authentication is enabled as a security.
|
|
An empty string value indicates that no ACL has been
|
|
set (which is a valid option)"
|
|
::= { bsnDot11EssEntry 43 }
|
|
|
|
bsnDot11EssAAAOverride OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or Disable AAA override for the global WLAN
|
|
parameters."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 44 }
|
|
|
|
bsnDot11EssWPAAuthKeyMgmtMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Enable or Disable WPA Pre-shared Key Mode. If enabled, a
|
|
preshared key should be set for WPA authentication.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 45 }
|
|
|
|
bsnDot11EssWPAAuthPresharedKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8..63))
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"WPA Authentication Preshared Key. This applies only
|
|
when bsnDot11EssWPAAuthKeyMgmtMode is in enable state.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
::= { bsnDot11EssEntry 46 }
|
|
|
|
bsnDot11EssWepAllowSharedKeyAuth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable this flag to allow Shared Key Authentication when
|
|
Static WEP is enabled."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 48 }
|
|
|
|
bsnDot11EssFortressSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of Fortress Passthrough Security policy. If
|
|
enabled, no other security can be enabled."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 47 }
|
|
|
|
bsnDot11EssL2tpSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of L2TP security policy. Note that this cannot be
|
|
applied with Web security policy, Cranite or Fortress
|
|
policy."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 49 }
|
|
|
|
bsnDot11EssWPAAuthPresharedKeyHex OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"WPA Authentication Preshared Key in the hex format.
|
|
This applies only when bsnDot11EssWPAAuthKeyMgmtMode
|
|
is in enable state.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
::= { bsnDot11EssEntry 50 }
|
|
|
|
bsnDot11EssBroadcastSsid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute when enabled allows the switch to
|
|
broadcast this SSID."
|
|
DEFVAL { enable }
|
|
::= { bsnDot11EssEntry 51 }
|
|
|
|
bsnDot11EssExternalPolicyValidation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies if external policy servers will
|
|
be used for validation. If no servers are configured in
|
|
bsnExternalPolicyServerTable then it cannot be enabled."
|
|
DEFVAL { enabled }
|
|
::= { bsnDot11EssEntry 52 }
|
|
|
|
bsnDot11EssRSNSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute specifies status of RSN Security Policy.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 53 }
|
|
|
|
bsnDot11EssRSNWPACompatibilityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute specifies RSN security's compatibility
|
|
mode with WPA.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 54 }
|
|
|
|
bsnDot11EssRSNAllowTKIPClients OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
yes(1),
|
|
no(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute specifies whether TKIP clients are allowed
|
|
by RSN Policy.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
DEFVAL { no }
|
|
::= { bsnDot11EssEntry 55 }
|
|
|
|
bsnDot11EssRSNAuthKeyMgmtMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute specifies whether Preshared key is used or
|
|
not. If used user should specify a key between 8 and 63
|
|
characters in bsnDot11EssRSNAuthPresharedKey attribute.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 56 }
|
|
|
|
bsnDot11EssRSNAuthPresharedKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8..63))
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"RSN Authentication Preshared Key. This applies only
|
|
when bsnDot11EssRSNAuthKeyMgmtMode is in enable state.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
::= { bsnDot11EssEntry 57 }
|
|
|
|
bsnDot11EssRSNAuthPresharedKeyHex OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"RSN Authentication Preshared Key in the hex format.
|
|
This applies only when bsnDot11EssWPAAuthKeyMgmtMode
|
|
is in enable state.
|
|
This has been deprecated for cLWSecDot11EssCckmTable."
|
|
::= { bsnDot11EssEntry 58 }
|
|
|
|
bsnDot11EssIPv6Bridging OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, IPv6 bridging is applied on the packets."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 59 }
|
|
|
|
bsnDot11EssRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row status type for the bsnDot11EssEntry"
|
|
::= { bsnDot11EssEntry 60 }
|
|
|
|
bsnDot11EssWmePolicySetting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
allowed(1),
|
|
required(2),
|
|
invalid(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, WME Policy is applied on the packets."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 61 }
|
|
|
|
bsnDot11Ess80211ePolicySetting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
allowed(1),
|
|
required(2),
|
|
invalid(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, 802.11e Policy is applied on the packets."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 62 }
|
|
|
|
bsnDot11EssWebPassthroughEmail OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, along with the bsnDot11EssWebPassthru attribute,
|
|
the client is allowed to connect by entering his/her email
|
|
address on the web connection page. There is no further
|
|
authentication required."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 63 }
|
|
|
|
bsnDot11Ess7920PhoneSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
clientCacLimit(1),
|
|
apCacLimit(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When client cac limit is enabled, the 7920 Phones with old
|
|
software where the Call Admission Control (CAC) Limit is
|
|
Specified on the client will be supported on the WLAN. The
|
|
support for clientCacLimit (by setting to value 1 or 3) cannot
|
|
be enabled when the bsnDot11EssWmePolicySetting is set to
|
|
allowed or required. When ap cac limit is enabled, the 7920
|
|
Phones with new software where the Call Admission Control
|
|
(CAC) Limit is advertised by the AP, will be supported on the
|
|
WLAN."
|
|
DEFVAL { disable }
|
|
::= { bsnDot11EssEntry 64 }
|
|
|
|
bsnDot11EssRadiusAuthPrimaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Primary Radius Authentication Server for this wlan."
|
|
::= { bsnDot11EssEntry 95 }
|
|
|
|
bsnDot11EssRadiusAuthSecondaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary Radius Authentication Server for this wlan."
|
|
::= { bsnDot11EssEntry 96 }
|
|
|
|
bsnDot11EssRadiusAuthTertiaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tertiary Radius Authentication Server for this wlan."
|
|
::= { bsnDot11EssEntry 97 }
|
|
|
|
bsnDot11EssRadiusAcctPrimaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Primary Radius Accounting Server for this wlan."
|
|
::= { bsnDot11EssEntry 98 }
|
|
|
|
bsnDot11EssRadiusAcctSecondaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary Radius Accounting Server for this wlan."
|
|
::= { bsnDot11EssEntry 99 }
|
|
|
|
bsnDot11EssRadiusAcctTertiaryServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tertiary Radius Accounting Server for this wlan."
|
|
::= { bsnDot11EssEntry 100 }
|
|
|
|
|
|
-- ***************************************************************
|
|
-- * QOS Profile Table
|
|
-- ***************************************************************
|
|
|
|
bsnDot11QosProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnDot11QosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QOS Profiles specified in bsnDot11EssTable can be customized
|
|
in this table. This is a lookup table for auto created
|
|
profiles"
|
|
::= { bsnEss 17 }
|
|
|
|
bsnDot11QosProfileEntry OBJECT-TYPE
|
|
SYNTAX BsnDot11QosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnDot11QosProfileTable."
|
|
INDEX { bsnDot11QosProfileName }
|
|
::= { bsnDot11QosProfileTable 1 }
|
|
|
|
BsnDot11QosProfileEntry ::= SEQUENCE {
|
|
bsnDot11QosProfileName OCTET STRING,
|
|
bsnDot11QosProfileDesc OCTET STRING,
|
|
bsnDot11QosAverageDataRate INTEGER,
|
|
bsnDot11QosBurstDataRate INTEGER,
|
|
bsnDot11QosAvgRealTimeDataRate INTEGER,
|
|
bsnDot11QosBurstRealTimeDataRate INTEGER,
|
|
bsnDot11QosMaxRFUsagePerAP INTEGER,
|
|
bsnDot11QosProfileQueueDepth INTEGER,
|
|
bsnDot11WiredQosProtocol INTEGER,
|
|
bsnDot11802Dot1PTag INTEGER,
|
|
bsnDot11ResetProfileToDefault INTEGER
|
|
}
|
|
|
|
bsnDot11QosProfileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QOS Profile Name. This will be one of bronze,gold,
|
|
platinum,silver,uranium."
|
|
::= { bsnDot11QosProfileEntry 1 }
|
|
|
|
bsnDot11QosProfileDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QOS Profile Description."
|
|
::= { bsnDot11QosProfileEntry 2 }
|
|
|
|
bsnDot11QosAverageDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is one of the per user bandwidth contracts(k).
|
|
Specifies Average Data Rate per user. Value of 0
|
|
indicates the feature is disabled."
|
|
::= { bsnDot11QosProfileEntry 3 }
|
|
|
|
bsnDot11QosBurstDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is one of the per user bandwidth contracts(k).
|
|
Specifies Average Burst Data Rate per user. Value of
|
|
0 indicates the feature is disabled."
|
|
::= { bsnDot11QosProfileEntry 4 }
|
|
|
|
bsnDot11QosAvgRealTimeDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is one of the per user bandwidth contracts(k).
|
|
Specifies Average Real Time Data Rate per user.
|
|
Value of 0 indicates the feature is disabled."
|
|
::= { bsnDot11QosProfileEntry 5 }
|
|
|
|
bsnDot11QosBurstRealTimeDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is one of the per user bandwidth contracts(k).
|
|
Specifies Burst Real Time Data Rate per user. Value
|
|
of 0 indicates the feature is disabled."
|
|
::= { bsnDot11QosProfileEntry 6 }
|
|
|
|
bsnDot11QosMaxRFUsagePerAP OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is one of the over the Air QOS parameter.
|
|
Specifies maximum RF Usage per AP in percentage."
|
|
::= { bsnDot11QosProfileEntry 7 }
|
|
|
|
bsnDot11QosProfileQueueDepth OBJECT-TYPE
|
|
SYNTAX INTEGER (10..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is one of the over the Air QOS parameter.
|
|
Specifies Queue depth for the current profile."
|
|
::= { bsnDot11QosProfileEntry 8 }
|
|
|
|
bsnDot11WiredQosProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
dot1p(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is one of the over the Air QOS parameter.
|
|
Specifies Queue depth for the current profile."
|
|
::= { bsnDot11QosProfileEntry 9 }
|
|
|
|
bsnDot11802Dot1PTag OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of wired QOS protocol for the
|
|
current profile. Value of 0 indicates the feature is
|
|
disabled."
|
|
::= { bsnDot11QosProfileEntry 10 }
|
|
|
|
bsnDot11ResetProfileToDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
default(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this attribute to reset to restore the factory default
|
|
value for the profile."
|
|
::= { bsnDot11QosProfileEntry 40 }
|
|
|
|
|
|
-- ***************************************************************
|
|
-- * Mobile Station Index Table
|
|
-- ***************************************************************
|
|
|
|
bsnMobileStationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobileStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mobile Station Table indexed by bsnMobileStationMacAddress.
|
|
(Mobile Station is better referred to as Client in the current
|
|
releases.)"
|
|
::= { bsnEss 4 }
|
|
|
|
bsnMobileStationEntry OBJECT-TYPE
|
|
SYNTAX BsnMobileStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnMobileStationTable."
|
|
INDEX { bsnMobileStationMacAddress }
|
|
::= { bsnMobileStationTable 1 }
|
|
|
|
BsnMobileStationEntry ::= SEQUENCE {
|
|
bsnMobileStationMacAddress MacAddress,
|
|
bsnMobileStationIpAddress IpAddress,
|
|
bsnMobileStationUserName DisplayString,
|
|
bsnMobileStationAPMacAddr MacAddress,
|
|
bsnMobileStationAPIfSlotId INTEGER,
|
|
bsnMobileStationEssIndex INTEGER,
|
|
bsnMobileStationSsid DisplayString,
|
|
bsnMobileStationAID Unsigned32,
|
|
bsnMobileStationStatus INTEGER,
|
|
bsnMobileStationReasonCode INTEGER,
|
|
bsnMobileStationMobilityStatus INTEGER,
|
|
bsnMobileStationAnchorAddress IpAddress,
|
|
bsnMobileStationCFPollable INTEGER,
|
|
bsnMobileStationCFPollRequest INTEGER,
|
|
bsnMobileStationChannelAgilityEnabled INTEGER,
|
|
bsnMobileStationPBCCOptionImplemented INTEGER,
|
|
bsnMobileStationShortPreambleOptionImplemented INTEGER,
|
|
bsnMobileStationSessionTimeout Unsigned32,
|
|
bsnMobileStationAuthenticationAlgorithm INTEGER,
|
|
bsnMobileStationWepState INTEGER,
|
|
bsnMobileStationPortNumber Unsigned32,
|
|
bsnMobileStationDeleteAction INTEGER,
|
|
bsnMobileStationPolicyManagerState DisplayString,
|
|
bsnMobileStationSecurityPolicyStatus INTEGER,
|
|
bsnMobileStationProtocol INTEGER,
|
|
bsnMobileStationMirrorMode INTEGER,
|
|
bsnMobileStationInterface DisplayString,
|
|
bsnMobileStationApMode INTEGER,
|
|
bsnMobileStationVlanId Integer32,
|
|
bsnMobileStationPolicyType INTEGER,
|
|
bsnMobileStationEncryptionCypher INTEGER,
|
|
bsnMobileStationEapType INTEGER,
|
|
bsnMobileStationCcxVersion INTEGER,
|
|
bsnMobileStationE2eVersion INTEGER,
|
|
bsnMobileStationStatusCode INTEGER
|
|
}
|
|
|
|
bsnMobileStationMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11 MAC Address of the Mobile Station."
|
|
::= { bsnMobileStationEntry 1 }
|
|
|
|
bsnMobileStationIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the Mobile Station"
|
|
::= { bsnMobileStationEntry 2 }
|
|
|
|
bsnMobileStationUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Name,if any, of the Mobile Station. This would
|
|
be non empty in case of Web Authentication and IPSec."
|
|
::= { bsnMobileStationEntry 3 }
|
|
|
|
bsnMobileStationAPMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11 Mac Address of the AP to which the
|
|
Mobile Station is associated."
|
|
::= { bsnMobileStationEntry 4 }
|
|
|
|
bsnMobileStationAPIfSlotId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slot ID of AP Interface to which the mobile station
|
|
is associated. The value 15 is used to indicate that
|
|
the slot Id is invalid."
|
|
::= { bsnMobileStationEntry 5 }
|
|
|
|
bsnMobileStationEssIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ess Index of the Wlan(SSID) that is being used by Mobile
|
|
Station to connect to AP"
|
|
::= { bsnMobileStationEntry 6 }
|
|
|
|
bsnMobileStationSsid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SSID Advertised by Mobile Station"
|
|
::= { bsnMobileStationEntry 7 }
|
|
|
|
bsnMobileStationAID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AID for the mobile station"
|
|
::= { bsnMobileStationEntry 8 }
|
|
|
|
bsnMobileStationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(0),
|
|
aaaPending(1),
|
|
authenticated(2),
|
|
associated(3),
|
|
powersave(4),
|
|
disassociated(5),
|
|
tobedeleted(6),
|
|
probing(7),
|
|
blacklisted(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the mobile station"
|
|
::= { bsnMobileStationEntry 9 }
|
|
|
|
bsnMobileStationReasonCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unspecified(1),
|
|
previousAuthNotValid(2),
|
|
deauthenticationLeaving(3),
|
|
disassociationDueToInactivity(4),
|
|
disassociationAPBusy(5),
|
|
class2FrameFromNonAuthStation(6),
|
|
class2FrameFromNonAssStation(7),
|
|
disassociationStaHasLeft(8),
|
|
staReqAssociationWithoutAuth(9),
|
|
invalidInformationElement(40),
|
|
groupCipherInvalid(41),
|
|
unicastCipherInvalid(42),
|
|
akmpInvalid(43),
|
|
unsupportedRsnVersion(44),
|
|
invalidRsnIeCapabilities(45),
|
|
cipherSuiteRejected(46),
|
|
missingReasonCode(99)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reason Code as defined by 802.11 standards"
|
|
::= { bsnMobileStationEntry 10 }
|
|
|
|
bsnMobileStationMobilityStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unassociated(0),
|
|
local(1),
|
|
anchor(2),
|
|
foreign(3),
|
|
handoff(4),
|
|
unknown(5),
|
|
exportanchor(6),
|
|
exportforeign(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mobility Role of the Mobile Station."
|
|
::= { bsnMobileStationEntry 11 }
|
|
|
|
bsnMobileStationAnchorAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the Mobility Status of the Mobile Station is
|
|
Anchor then it will have Peer Ip Address and will
|
|
have Anchor IP if the Role is Foreign"
|
|
::= { bsnMobileStationEntry 12 }
|
|
|
|
bsnMobileStationCFPollable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notimplemented(0),
|
|
implemented(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this attribute is true, it shall indicate that the
|
|
Mobile Station is able to respond to a CF-Poll with a
|
|
data frame within a SIFS time. This attribute shall be
|
|
false if the Mobile Station is not able to respond to a
|
|
CF-Poll with a data frame within a SIFS time."
|
|
::= { bsnMobileStationEntry 13 }
|
|
|
|
bsnMobileStationCFPollRequest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notimplemented(0),
|
|
implemented(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether CFP is requested by Mobile
|
|
Station or not"
|
|
::= { bsnMobileStationEntry 14 }
|
|
|
|
bsnMobileStationChannelAgilityEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notimplemented(0),
|
|
implemented(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates that the PHY channel agility
|
|
functionality is enabled."
|
|
::= { bsnMobileStationEntry 15 }
|
|
|
|
bsnMobileStationPBCCOptionImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notimplemented(0),
|
|
implemented(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when true, shall indicate that the PBCC
|
|
modulation option as defined in subclause 18.4.6.6 is
|
|
implemented. The default value of this attribute shall
|
|
be false."
|
|
::= { bsnMobileStationEntry 16 }
|
|
|
|
bsnMobileStationShortPreambleOptionImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notimplemented(0),
|
|
implemented(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when true, shall indicate that the
|
|
short preamble option as defined in subclause 18.2.2.2
|
|
is implemented. The default value of this attribute
|
|
shall be false."
|
|
::= { bsnMobileStationEntry 17 }
|
|
|
|
bsnMobileStationSessionTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Session Timeout of Mobile station"
|
|
::= { bsnMobileStationEntry 18 }
|
|
|
|
bsnMobileStationAuthenticationAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
openSystem(0),
|
|
sharedKey(1),
|
|
unknown(2),
|
|
openAndEap(128)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication Algorithm of Mobile Station"
|
|
::= { bsnMobileStationEntry 19 }
|
|
|
|
bsnMobileStationWepState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP State of Mobile Station"
|
|
::= { bsnMobileStationEntry 20 }
|
|
|
|
bsnMobileStationPortNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Number of this Airespace Switch on which the
|
|
traffic of the Mobile Station is coming through."
|
|
::= { bsnMobileStationEntry 21 }
|
|
|
|
bsnMobileStationDeleteAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
delete(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action to Deauthenticate the Mobile Station. Set the
|
|
State to delete."
|
|
::= { bsnMobileStationEntry 22 }
|
|
|
|
bsnMobileStationPolicyManagerState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Policy Manager State of the mobile station."
|
|
::= { bsnMobileStationEntry 23 }
|
|
|
|
bsnMobileStationSecurityPolicyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
completed(0),
|
|
notcompleted(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this attribute has value completed, it shall
|
|
indicate that the Mobile Station has completed the
|
|
security policy checks. Otherwise the checks are yet
|
|
to be completed."
|
|
::= { bsnMobileStationEntry 24 }
|
|
|
|
bsnMobileStationProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11a(1),
|
|
dot11b(2),
|
|
dot11g(3),
|
|
unknown(4),
|
|
mobile(5),
|
|
dot11n24(6),
|
|
dot11n5(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.11 protocol type of the client. The protocol
|
|
is mobile when this client detail is seen on the
|
|
anchor i.e it's mobility status is anchor."
|
|
::= { bsnMobileStationEntry 25 }
|
|
|
|
bsnMobileStationMirrorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled, then mirroring for this client will be statically
|
|
configured irrespective of the AP and the port this client
|
|
is on."
|
|
::= { bsnMobileStationEntry 26 }
|
|
|
|
bsnMobileStationInterface OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Interface of the mobile client to the switch."
|
|
::= { bsnMobileStationEntry 27 }
|
|
|
|
bsnMobileStationApMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(0),
|
|
monitor(1),
|
|
remote(2),
|
|
roguedetector(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mode of the AP to which the Mobile Station is associated."
|
|
::= { bsnMobileStationEntry 28 }
|
|
|
|
bsnMobileStationVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan ID of the Interface to which the client is
|
|
associated."
|
|
::= { bsnMobileStationEntry 29 }
|
|
|
|
bsnMobileStationPolicyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot1x(0),
|
|
wpa1(1),
|
|
wpa2(2),
|
|
wpa2vff(3),
|
|
notavailable(4),
|
|
unknown(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mode of the AP to which the Mobile Station is associated."
|
|
::= { bsnMobileStationEntry 30 }
|
|
|
|
bsnMobileStationEncryptionCypher OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ccmpAes(0),
|
|
tkipMic(1),
|
|
wep40(2),
|
|
wep104(3),
|
|
wep128(4),
|
|
none(5),
|
|
notavailable(6),
|
|
unknown(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mode of the AP to which the Mobile Station is associated."
|
|
::= { bsnMobileStationEntry 31 }
|
|
|
|
bsnMobileStationEapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eapTls(0),
|
|
ttls(1),
|
|
peap(2),
|
|
leap(3),
|
|
speke(4),
|
|
eapFast(5),
|
|
notavailable(6),
|
|
unknown(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mode of the AP to which the Mobile Station is associated."
|
|
::= { bsnMobileStationEntry 32 }
|
|
|
|
bsnMobileStationCcxVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(0),
|
|
ccxv1(1),
|
|
ccxv2(2),
|
|
ccxv3(3),
|
|
ccxv4(4),
|
|
ccxv5(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Cisco Compatible Extensions (CCX)
|
|
Version the client is using for communication
|
|
with the AP."
|
|
DEFVAL { notSupported }
|
|
::= { bsnMobileStationEntry 33 }
|
|
|
|
bsnMobileStationE2eVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(0),
|
|
e2ev1(1),
|
|
e2ev2(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the End-2-End Version the client is
|
|
using for communication with the AP."
|
|
DEFVAL { notSupported }
|
|
::= { bsnMobileStationEntry 34 }
|
|
|
|
bsnMobileStationStatusCode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status Code of the Mobile Station"
|
|
::= { bsnMobileStationEntry 42 }
|
|
|
|
|
|
-- ***************************************************************
|
|
-- * Mobile Station Table Indexed by Mobile Station IpAddress
|
|
-- ***************************************************************
|
|
|
|
bsnMobileStationByIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobileStationByIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mobile Station Table indexed by bsnMobileStationByIpAddress.
|
|
NOTE: This is just to facilitate the search of mobile
|
|
stations based on IP Address. Doing a get without the index
|
|
doesn't return anything. (Mobile Station is better referred
|
|
to as Client in the current releases.)"
|
|
::= { bsnEss 10 }
|
|
|
|
bsnMobileStationByIpEntry OBJECT-TYPE
|
|
SYNTAX BsnMobileStationByIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnMobileStationByIpTable."
|
|
INDEX { bsnMobileStationByIpAddress }
|
|
::= { bsnMobileStationByIpTable 1 }
|
|
|
|
BsnMobileStationByIpEntry ::= SEQUENCE {
|
|
bsnMobileStationByIpAddress IpAddress,
|
|
bsnMobileStationByIpMacAddress MacAddress
|
|
}
|
|
|
|
bsnMobileStationByIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the Mobile Station"
|
|
::= { bsnMobileStationByIpEntry 1 }
|
|
|
|
bsnMobileStationByIpMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11 Mac Address of the Mobile Station."
|
|
::= { bsnMobileStationByIpEntry 2 }
|
|
|
|
|
|
-- ***************************************************************
|
|
-- * Mobile Station Table Indexed by Mobile Station Username and MAC
|
|
-- * Address
|
|
-- ***************************************************************
|
|
|
|
bsnMobileStationByUsernameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobileStationByUsernameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mobile Station Table indexed by the Mobile Station Username
|
|
and MAC Address. NOTE: This is just to facilitate the search
|
|
of mobile stations based on User Name. Doing a get without
|
|
the username doesn't return anything. (Mobile Station is
|
|
better referred to as Client in the current releases.)"
|
|
::= { bsnEss 13 }
|
|
|
|
bsnMobileStationByUsernameEntry OBJECT-TYPE
|
|
SYNTAX BsnMobileStationByUsernameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnMobileStationByUsernameTable."
|
|
INDEX {
|
|
bsnMobileStationByUserName,
|
|
bsnMobileStationByUserMacAddress
|
|
}
|
|
::= { bsnMobileStationByUsernameTable 1 }
|
|
|
|
BsnMobileStationByUsernameEntry ::= SEQUENCE {
|
|
bsnMobileStationByUserName OCTET STRING,
|
|
bsnMobileStationByUserMacAddress MacAddress
|
|
}
|
|
|
|
bsnMobileStationByUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Username of the Mobile Station"
|
|
::= { bsnMobileStationByUsernameEntry 1 }
|
|
|
|
bsnMobileStationByUserMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11 Mac Address of the Mobile Station."
|
|
::= { bsnMobileStationByUsernameEntry 2 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- * Airespace Mobile Station Per Radio Per Vap Table
|
|
-- *****************************************************************
|
|
|
|
bsnMobileStationPerRadioPerVapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobileStationPerRadioPerVapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mobile Station Per Radio Per VAP(WLAN) Table. This table
|
|
lists all Mobile Stations on a particular Airespace AP
|
|
Interface for a particular ESS(Wlan). It only lists MAC
|
|
Addresses. Further details for a Mobile Station can be found
|
|
from bsnMobileStationTable once the MAC Address is knonwn.
|
|
(Mobile Station is better referred to as Client in the
|
|
current releases.)"
|
|
::= { bsnEss 5 }
|
|
|
|
bsnMobileStationPerRadioPerVapEntry OBJECT-TYPE
|
|
SYNTAX BsnMobileStationPerRadioPerVapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in MobileStationPerRadioPerVapTable."
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnDot11EssIndex,
|
|
bsnMobileStationPerRadioPerVapIndex
|
|
}
|
|
::= { bsnMobileStationPerRadioPerVapTable 1 }
|
|
|
|
BsnMobileStationPerRadioPerVapEntry ::= SEQUENCE {
|
|
bsnMobileStationPerRadioPerVapIndex Integer32,
|
|
bsnMobileStationMacAddr MacAddress
|
|
}
|
|
|
|
bsnMobileStationPerRadioPerVapIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of Mobile Station. The index starts from
|
|
1 and goes upto the total number of Mobile Stations
|
|
on Airespace Radio Interface for a specific
|
|
ESS (Wlan)."
|
|
::= { bsnMobileStationPerRadioPerVapEntry 1 }
|
|
|
|
bsnMobileStationMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address of Mobile Station."
|
|
::= { bsnMobileStationPerRadioPerVapEntry 20 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Begin of bsnMobileStationStatsTable
|
|
-- *******************************************************************
|
|
|
|
bsnMobileStationStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobileStationStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mobile Station Statistics Table.
|
|
(Mobile Station is better referred to as Client in the current
|
|
releases.)"
|
|
::= { bsnEss 6 }
|
|
|
|
bsnMobileStationStatsEntry OBJECT-TYPE
|
|
SYNTAX BsnMobileStationStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnMobileStationStatsTable."
|
|
INDEX { bsnMobileStationMacAddress }
|
|
::= { bsnMobileStationStatsTable 1 }
|
|
|
|
BsnMobileStationStatsEntry ::= SEQUENCE {
|
|
bsnMobileStationRSSI Integer32,
|
|
bsnMobileStationBytesReceived Counter64,
|
|
bsnMobileStationBytesSent Counter64,
|
|
bsnMobileStationPolicyErrors Counter64,
|
|
bsnMobileStationPacketsReceived Counter64,
|
|
bsnMobileStationPacketsSent Counter64,
|
|
bsnMobileStationSnr Integer32
|
|
}
|
|
|
|
bsnMobileStationRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average packet RSSI for the Mobile Station."
|
|
::= { bsnMobileStationStatsEntry 1 }
|
|
|
|
bsnMobileStationBytesReceived OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bytes received from Mobile Station"
|
|
::= { bsnMobileStationStatsEntry 2 }
|
|
|
|
bsnMobileStationBytesSent OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bytes sent to Mobile Station"
|
|
::= { bsnMobileStationStatsEntry 3 }
|
|
|
|
bsnMobileStationPolicyErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Policy Errors for Mobile Station"
|
|
::= { bsnMobileStationStatsEntry 4 }
|
|
|
|
bsnMobileStationPacketsReceived OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packets received from Mobile Station"
|
|
::= { bsnMobileStationStatsEntry 5 }
|
|
|
|
bsnMobileStationPacketsSent OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packets sent to Mobile Station"
|
|
::= { bsnMobileStationStatsEntry 6 }
|
|
|
|
bsnMobileStationSnr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal to noise Ratio of the Mobile Station."
|
|
::= { bsnMobileStationStatsEntry 26 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Begin of bsnMobileStationExtStatsTable
|
|
-- *******************************************************************
|
|
|
|
bsnMobileStationExtStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobileStationExtStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This table was supported only by indoor mesh
|
|
AP -cisco 1000. As this AP is not supported
|
|
after 4.2.x.x. This table has been marked obsolete.
|
|
Mobile Station Extended Statistics Table.
|
|
(Mobile Station is better referred to as Client in the
|
|
current releases.)"
|
|
::= { bsnEss 21 }
|
|
|
|
bsnMobileStationExtStatsEntry OBJECT-TYPE
|
|
SYNTAX BsnMobileStationExtStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An entry in bsnMobileStationExtStatsTable."
|
|
INDEX { bsnMobileStationMacAddress }
|
|
::= { bsnMobileStationExtStatsTable 1 }
|
|
|
|
BsnMobileStationExtStatsEntry ::= SEQUENCE {
|
|
bsnMobileStationSampleTime Integer32,
|
|
bsnMobileStationTxExcessiveRetries Counter64,
|
|
bsnMobileStationTxRetries Counter64,
|
|
bsnMobileStationTxFiltered Counter64
|
|
}
|
|
|
|
bsnMobileStationSampleTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Time stats were sampled as seconds since the epoch."
|
|
::= { bsnMobileStationExtStatsEntry 1 }
|
|
|
|
bsnMobileStationTxExcessiveRetries OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Tx packets dropped due to excessive retries."
|
|
::= { bsnMobileStationExtStatsEntry 2 }
|
|
|
|
bsnMobileStationTxRetries OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Tx packets retransmitted."
|
|
::= { bsnMobileStationExtStatsEntry 3 }
|
|
|
|
bsnMobileStationTxFiltered OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Tx packets dropped by the built-in Tx filter"
|
|
::= { bsnMobileStationExtStatsEntry 20 }
|
|
|
|
|
|
-- ***************************************************************
|
|
-- * Mobile Station RSSI data Table
|
|
-- ***************************************************************
|
|
|
|
bsnMobileStationRssiDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobileStationRssiDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mobile Station RSSI data Table indexed by
|
|
bsnMobileStationMacAddress,
|
|
bsnMobileStationRssiDataApMacAddress,
|
|
bsnMobileStationRssiDataApIfSlotId.
|
|
(Mobile Station is better referred to as Client in the
|
|
current releases.)"
|
|
::= { bsnEss 11 }
|
|
|
|
bsnMobileStationRssiDataEntry OBJECT-TYPE
|
|
SYNTAX BsnMobileStationRssiDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnMobileStationRssiDataTable."
|
|
INDEX {
|
|
bsnMobileStationMacAddress,
|
|
bsnMobileStationRssiDataApMacAddress,
|
|
bsnMobileStationRssiDataApIfSlotId,
|
|
bsnAPIfPhyAntennaIndex
|
|
}
|
|
::= { bsnMobileStationRssiDataTable 1 }
|
|
|
|
BsnMobileStationRssiDataEntry ::= SEQUENCE {
|
|
bsnMobileStationRssiDataApMacAddress MacAddress,
|
|
bsnMobileStationRssiDataApIfSlotId Unsigned32,
|
|
bsnMobileStationRssiDataApIfType INTEGER,
|
|
bsnMobileStationRssiDataApName DisplayString,
|
|
bsnMobileStationRssiData Integer32,
|
|
bsnAPIfPhyAntennaIndex Unsigned32,
|
|
bsnMobileStationRssiDataLastHeard Counter32
|
|
}
|
|
|
|
bsnMobileStationRssiDataApMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11 Mac Address of the AP on which
|
|
Mobile Station is associated."
|
|
::= { bsnMobileStationRssiDataEntry 1 }
|
|
|
|
bsnMobileStationRssiDataApIfSlotId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SlotId of APIf on which mobile station is
|
|
associated"
|
|
::= { bsnMobileStationRssiDataEntry 2 }
|
|
|
|
bsnMobileStationRssiDataApIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11bg(1),
|
|
dot11a(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type of the radio that sensed the
|
|
rssi data."
|
|
::= { bsnMobileStationRssiDataEntry 3 }
|
|
|
|
bsnMobileStationRssiDataApName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Name of the AP that sensed the rssi data."
|
|
::= { bsnMobileStationRssiDataEntry 4 }
|
|
|
|
bsnMobileStationRssiData OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSSI seen by Airespace AP Interface for the Mobile Station"
|
|
::= { bsnMobileStationRssiDataEntry 5 }
|
|
|
|
bsnAPIfPhyAntennaIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Antenna which recived the probe request from client.
|
|
The antenna which reported the RSSI value for the client.
|
|
For now value will be 0 to 1, in future it may change."
|
|
::= { bsnMobileStationRssiDataEntry 6 }
|
|
|
|
bsnMobileStationRssiDataLastHeard OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No of seconds ago when this RSSI data was recorded."
|
|
::= { bsnMobileStationRssiDataEntry 25 }
|
|
|
|
|
|
-- ***************************************************************
|
|
-- * RF ID Tag Table
|
|
-- ***************************************************************
|
|
|
|
bsnTagTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF ID Tag Table indexed by bsnTagDot11MacAddress."
|
|
::= { bsnEss 18 }
|
|
|
|
bsnTagEntry OBJECT-TYPE
|
|
SYNTAX BsnTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnTagTable."
|
|
INDEX { bsnTagDot11MacAddress }
|
|
::= { bsnTagTable 1 }
|
|
|
|
BsnTagEntry ::= SEQUENCE {
|
|
bsnTagDot11MacAddress MacAddress,
|
|
bsnTagType INTEGER,
|
|
bsnTagTimeInterval Unsigned32,
|
|
bsnTagBatteryStatus INTEGER,
|
|
bsnTagLastReported Unsigned32
|
|
}
|
|
|
|
bsnTagDot11MacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11 MAC Address of the RF ID Tag."
|
|
::= { bsnTagEntry 1 }
|
|
|
|
bsnTagType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
type1(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the RF ID Tag."
|
|
::= { bsnTagEntry 2 }
|
|
|
|
bsnTagTimeInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time Interval after which the tag transmits data."
|
|
::= { bsnTagEntry 3 }
|
|
|
|
bsnTagBatteryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
low(1),
|
|
normal(2),
|
|
medium(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Battery Status of the RF ID Tag."
|
|
::= { bsnTagEntry 4 }
|
|
|
|
bsnTagLastReported OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No of seconds ago when this tag was heard by any AP."
|
|
::= { bsnTagEntry 23 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Begin of bsnTagStatsTable
|
|
-- *******************************************************************
|
|
|
|
bsnTagStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnTagStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF ID Tag Statistics Table."
|
|
::= { bsnEss 20 }
|
|
|
|
bsnTagStatsEntry OBJECT-TYPE
|
|
SYNTAX BsnTagStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnTagStatsTable."
|
|
INDEX { bsnTagDot11MacAddress }
|
|
::= { bsnTagStatsTable 1 }
|
|
|
|
BsnTagStatsEntry ::= SEQUENCE {
|
|
bsnTagBytesReceived Unsigned32,
|
|
bsnTagPacketsReceived Unsigned32
|
|
}
|
|
|
|
bsnTagBytesReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bytes received from an RF ID Tag"
|
|
::= { bsnTagStatsEntry 1 }
|
|
|
|
bsnTagPacketsReceived OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packets received from an RF ID Tag"
|
|
::= { bsnTagStatsEntry 20 }
|
|
|
|
|
|
-- ***************************************************************
|
|
-- * RF ID Tag Detecting AP Table
|
|
-- ***************************************************************
|
|
|
|
bsnTagRssiDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnTagRssiDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF ID Tag Detecting AP Table indexed by bsnTagDot11MacAddress,
|
|
bsnTagRssiDataApMacAddress and bsnTagRssiDataApIfSlotId."
|
|
::= { bsnEss 19 }
|
|
|
|
bsnTagRssiDataEntry OBJECT-TYPE
|
|
SYNTAX BsnTagRssiDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnTagRssiDataTable."
|
|
INDEX {
|
|
bsnTagDot11MacAddress,
|
|
bsnTagRssiDataApMacAddress,
|
|
bsnTagRssiDataApIfSlotId
|
|
}
|
|
::= { bsnTagRssiDataTable 1 }
|
|
|
|
BsnTagRssiDataEntry ::= SEQUENCE {
|
|
bsnTagRssiDataApMacAddress MacAddress,
|
|
bsnTagRssiDataApIfSlotId Unsigned32,
|
|
bsnTagRssiDataApIfType INTEGER,
|
|
bsnTagRssiDataApName DisplayString,
|
|
bsnTagRssiDataLastHeard Counter32,
|
|
bsnTagRssiData Integer32,
|
|
bsnTagRssiDataSnr Integer32
|
|
}
|
|
|
|
bsnTagRssiDataApMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11 MAC Address of the AP detecting the RF ID Tag."
|
|
::= { bsnTagRssiDataEntry 1 }
|
|
|
|
bsnTagRssiDataApIfSlotId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..5)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slot Id of the radio on AP detecting the RF ID Tag."
|
|
::= { bsnTagRssiDataEntry 2 }
|
|
|
|
bsnTagRssiDataApIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11b(1),
|
|
dot11a(2),
|
|
uwb(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface Type of the radio on AP detecting the RF ID Tag."
|
|
::= { bsnTagRssiDataEntry 3 }
|
|
|
|
bsnTagRssiDataApName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the AP detecting the RF ID Tag."
|
|
::= { bsnTagRssiDataEntry 4 }
|
|
|
|
bsnTagRssiDataLastHeard OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No of seconds ago when this tag was heard by this detecting
|
|
AP."
|
|
::= { bsnTagRssiDataEntry 5 }
|
|
|
|
bsnTagRssiData OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSSI of the RF ID Tag as seen by the radio on this
|
|
detecting AP."
|
|
::= { bsnTagRssiDataEntry 6 }
|
|
|
|
bsnTagRssiDataSnr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNR of the RF ID tag as seen by the radio on this
|
|
detecting AP."
|
|
::= { bsnTagRssiDataEntry 26 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnWatchListClientTable
|
|
-- ********************************************************************
|
|
|
|
bsnWatchListClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnWatchListClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Table of watch listed clients. When clients are added to this
|
|
table by username or MAC address, ACS collects data for them
|
|
to show trend reports. The switch generates Client
|
|
Association and Client Authentication traps for the watch
|
|
listed clients.The watch list feature can be enbaled or
|
|
diabled by the bsnWatchListFeatureEnable flag on the switch."
|
|
::= { bsnEss 12 }
|
|
|
|
bsnWatchListClientEntry OBJECT-TYPE
|
|
SYNTAX BsnWatchListClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An entry in bsnWatchListClientTable."
|
|
INDEX {
|
|
bsnWatchListClientKey,
|
|
bsnWatchListClientType
|
|
}
|
|
::= { bsnWatchListClientTable 1 }
|
|
|
|
BsnWatchListClientEntry ::= SEQUENCE {
|
|
bsnWatchListClientKey OCTET STRING,
|
|
bsnWatchListClientType INTEGER,
|
|
bsnWatchListClientRowStatus RowStatus
|
|
}
|
|
|
|
bsnWatchListClientKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"MAC Address or User Name of Client that is to be
|
|
added to the watch list."
|
|
::= { bsnWatchListClientEntry 1 }
|
|
|
|
bsnWatchListClientType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
byMac(1),
|
|
byUserName(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The type of the watch list client entry. The entry can
|
|
be created by Client MAC Address or by Username."
|
|
::= { bsnWatchListClientEntry 2 }
|
|
|
|
bsnWatchListClientRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A row status type for the bsnWatchListClientEntry"
|
|
::= { bsnWatchListClientEntry 20 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnRougueAPTable
|
|
-- ********************************************************************
|
|
|
|
bsnRogueAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnRogueAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rogue Table. This table lists all the Rogue APs detected by
|
|
Airespace APs."
|
|
::= { bsnEss 7 }
|
|
|
|
bsnRogueAPEntry OBJECT-TYPE
|
|
SYNTAX BsnRogueAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry in bsnRogueAPTable."
|
|
INDEX { bsnRogueAPDot11MacAddress }
|
|
::= { bsnRogueAPTable 1 }
|
|
|
|
BsnRogueAPEntry ::= SEQUENCE {
|
|
bsnRogueAPDot11MacAddress MacAddress,
|
|
bsnRogueAPTotalDetectingAPs Integer32,
|
|
bsnRogueAPFirstReported DisplayString,
|
|
bsnRogueAPLastReported DisplayString,
|
|
bsnRogueAPContainmentLevel INTEGER,
|
|
bsnRogueAPType INTEGER,
|
|
bsnRogueAPOnNetwork INTEGER,
|
|
bsnRogueAPTotalClients Integer32,
|
|
bsnRogueAPRowStatus RowStatus,
|
|
bsnRogueAPMaxDetectedRSSI Integer32,
|
|
bsnRogueAPSSID DisplayString,
|
|
bsnRogueAPDetectingAPRadioType BITS,
|
|
bsnRogueAPDetectingAPMacAddress MacAddress,
|
|
bsnRogueAPMaxRssiRadioType INTEGER,
|
|
bsnRogueAPState INTEGER,
|
|
bsnRogueAPClassType INTEGER,
|
|
bsnRogueAPChannel Integer32,
|
|
bsnRogueAPDetectingAPName OCTET STRING
|
|
}
|
|
|
|
bsnRogueAPDot11MacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of Rogue Station."
|
|
::= { bsnRogueAPEntry 1 }
|
|
|
|
bsnRogueAPTotalDetectingAPs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Airespace APs that detected this rogue."
|
|
::= { bsnRogueAPEntry 2 }
|
|
|
|
bsnRogueAPFirstReported OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time Stamp when this Rogue was First Detected."
|
|
::= { bsnRogueAPEntry 3 }
|
|
|
|
bsnRogueAPLastReported OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time Stamp when this Rogue was Last Detected."
|
|
::= { bsnRogueAPEntry 4 }
|
|
|
|
bsnRogueAPContainmentLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unassigned(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the state of the rogue is contained, this specifies
|
|
the level of containment. Higher the level, more the
|
|
number of detecting APs that are used to contain it.
|
|
The value must be between 1 to 4 for 'contained' state."
|
|
::= { bsnRogueAPEntry 5 }
|
|
|
|
bsnRogueAPType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ap(0),
|
|
adhoc(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies if the Rogue is of ad-hoc type
|
|
or is an AP."
|
|
::= { bsnRogueAPEntry 6 }
|
|
|
|
bsnRogueAPOnNetwork OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies if the Rogue is on Wired
|
|
Network or not."
|
|
::= { bsnRogueAPEntry 7 }
|
|
|
|
bsnRogueAPTotalClients OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Clients detected on this rogue."
|
|
::= { bsnRogueAPEntry 8 }
|
|
|
|
bsnRogueAPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnRogueAPEntry 9 }
|
|
|
|
bsnRogueAPMaxDetectedRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the max RSSI value of all the detctecting APs,
|
|
which have detected this rogue."
|
|
::= { bsnRogueAPEntry 10 }
|
|
|
|
bsnRogueAPSSID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the SSID of the rogue detected by Access
|
|
Point, which has max RSSI value of all the
|
|
detectecting APs of this rogue."
|
|
::= { bsnRogueAPEntry 11 }
|
|
|
|
bsnRogueAPDetectingAPRadioType OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
dot11b(0),
|
|
dot11a(1),
|
|
dot11g(2),
|
|
dot11n24(3),
|
|
dot11n5(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio type of detecting APs. If the radio type is
|
|
detected by dot11bg radio or dot11a radio or both."
|
|
::= { bsnRogueAPEntry 12 }
|
|
|
|
bsnRogueAPDetectingAPMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of of detecting AP which received max RSSI"
|
|
::= { bsnRogueAPEntry 13 }
|
|
|
|
bsnRogueAPMaxRssiRadioType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11b(1),
|
|
dot11a(2),
|
|
uwb(4),
|
|
dot11g(5),
|
|
dot11n24(6),
|
|
dot11n5(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The radio type of detecting AP which received max RSSI value."
|
|
::= { bsnRogueAPEntry 14 }
|
|
|
|
bsnRogueAPState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initializing(0),
|
|
pending(1),
|
|
alert(2),
|
|
detectedLrad(3),
|
|
known(4),
|
|
acknowledge(5),
|
|
contained(6),
|
|
threat(7),
|
|
containedPending(8),
|
|
knownContained(9),
|
|
trustedMissing(10)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is use to specify the state in which
|
|
the Rogue AP is user can set the Rogue AP in alert,
|
|
known or acknowledge state.
|
|
Alert state means Rogue AP can be a potential threat.
|
|
Trap will be sent out to trap recipients.
|
|
Known state means its just internal AP which is not
|
|
on the same Switch.
|
|
Acknowledge state means an external AP whose
|
|
existence is acceptable and not a threat (probably
|
|
some other company's AP).
|
|
Contained means containement is initiated and ongoing.
|
|
Threat is usually the state when the rogue is found
|
|
on wired network.
|
|
known(4), knownContained(9) and trustedMissing(10)
|
|
will appear in known rogue list.
|
|
known rogues can be pre provisioned and known rogues
|
|
state can be changed to alert(2)"
|
|
::= { bsnRogueAPEntry 24 }
|
|
|
|
bsnRogueAPClassType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pending(0),
|
|
friendly(1),
|
|
malicious(2),
|
|
unclassified(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AP class type of the client detected."
|
|
::= { bsnRogueAPEntry 25 }
|
|
|
|
bsnRogueAPChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the channel number of the last detecting APs,
|
|
which has detected this rogue."
|
|
::= { bsnRogueAPEntry 26 }
|
|
|
|
bsnRogueAPDetectingAPName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP name of the detecting AP which received max RSSI"
|
|
::= { bsnRogueAPEntry 27 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnRougueAPAirespaceAPTable
|
|
-- ********************************************************************
|
|
|
|
bsnRogueAPAirespaceAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnRogueAPAirespaceAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rogue Station Table. This table lists all the Airespace AP
|
|
Interfaces that detected a particular Rogue."
|
|
::= { bsnEss 8 }
|
|
|
|
bsnRogueAPAirespaceAPEntry OBJECT-TYPE
|
|
SYNTAX BsnRogueAPAirespaceAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnRogueAPAirespaceAPEntry."
|
|
INDEX {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnRogueAPAirespaceAPMacAddress,
|
|
bsnRogueAPAirespaceAPSlotId
|
|
}
|
|
::= { bsnRogueAPAirespaceAPTable 1 }
|
|
|
|
BsnRogueAPAirespaceAPEntry ::= SEQUENCE {
|
|
bsnRogueAPAirespaceAPMacAddress MacAddress,
|
|
bsnRogueAPAirespaceAPSlotId Unsigned32,
|
|
bsnRogueAPRadioType INTEGER,
|
|
bsnRogueAPAirespaceAPName DisplayString,
|
|
bsnRogueAPChannelNumber Integer32,
|
|
bsnRogueAPSsid DisplayString,
|
|
bsnRogueAPAirespaceAPRSSI Integer32,
|
|
bsnRogueAPContainmentMode INTEGER,
|
|
bsnRogueAPContainmentChannelCount Unsigned32,
|
|
bsnRogueAPContainmentChannels DisplayString,
|
|
bsnRogueAPAirespaceAPLastHeard Counter32,
|
|
bsnRogueAPAirespaceAPWepMode INTEGER,
|
|
bsnRogueAPAirespaceAPPreamble INTEGER,
|
|
bsnRogueAPAirespaceAPWpaMode INTEGER,
|
|
bsnRogueAPAirespaceAPSNR Integer32,
|
|
bsnRogueAPChannelWidth INTEGER
|
|
}
|
|
|
|
bsnRogueAPAirespaceAPMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of Airespace AP Interface that Detected
|
|
the Rogue."
|
|
::= { bsnRogueAPAirespaceAPEntry 1 }
|
|
|
|
bsnRogueAPAirespaceAPSlotId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot ID of the Airespace AP Interface that detected the
|
|
Rogue."
|
|
::= { bsnRogueAPAirespaceAPEntry 2 }
|
|
|
|
bsnRogueAPRadioType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11b(1),
|
|
dot11a(2),
|
|
unknown(3),
|
|
uwb(4),
|
|
dot11g(5),
|
|
dot11n24(6),
|
|
dot11n5(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Airespace AP Interface type that detected the Rogue."
|
|
::= { bsnRogueAPAirespaceAPEntry 3 }
|
|
|
|
bsnRogueAPAirespaceAPName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of Airespace AP Interface that detected the Rogue."
|
|
::= { bsnRogueAPAirespaceAPEntry 4 }
|
|
|
|
bsnRogueAPChannelNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertised Channel Number of the Airespace AP
|
|
Interface picked up from the Rogue."
|
|
::= { bsnRogueAPAirespaceAPEntry 5 }
|
|
|
|
bsnRogueAPSsid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SSID Advertised by Rogue Station."
|
|
::= { bsnRogueAPAirespaceAPEntry 6 }
|
|
|
|
bsnRogueAPAirespaceAPRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rogue RSSI as seen by Airespace AP Interface."
|
|
::= { bsnRogueAPAirespaceAPEntry 7 }
|
|
|
|
bsnRogueAPContainmentMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(0),
|
|
deauthBroadcast(1),
|
|
cfp(2),
|
|
max(3),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the rogue is in 'contained' state, this attribute
|
|
shows the containment mode used by the AP."
|
|
::= { bsnRogueAPAirespaceAPEntry 8 }
|
|
|
|
bsnRogueAPContainmentChannelCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of channels used for rogue containment."
|
|
::= { bsnRogueAPAirespaceAPEntry 9 }
|
|
|
|
bsnRogueAPContainmentChannels OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the comma separated string of channels used for
|
|
rogue containment."
|
|
::= { bsnRogueAPAirespaceAPEntry 10 }
|
|
|
|
bsnRogueAPAirespaceAPLastHeard OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No of seconds ago when this Rogue was last heard by
|
|
this AP."
|
|
::= { bsnRogueAPAirespaceAPEntry 11 }
|
|
|
|
bsnRogueAPAirespaceAPWepMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The WEP mode on this detecting AP."
|
|
::= { bsnRogueAPAirespaceAPEntry 12 }
|
|
|
|
bsnRogueAPAirespaceAPPreamble OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
long(0),
|
|
short(1),
|
|
notSupported(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preamble on this detecting AP."
|
|
::= { bsnRogueAPAirespaceAPEntry 13 }
|
|
|
|
bsnRogueAPAirespaceAPWpaMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The WPA mode on this detecting AP."
|
|
::= { bsnRogueAPAirespaceAPEntry 14 }
|
|
|
|
bsnRogueAPAirespaceAPSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNR seen by Airespace AP Interface from Rogue"
|
|
::= { bsnRogueAPAirespaceAPEntry 27 }
|
|
|
|
bsnRogueAPChannelWidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
five(1),
|
|
ten(2),
|
|
twenty(3),
|
|
aboveforty(4),
|
|
belowforty(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the channel width of the rogue."
|
|
::= { bsnRogueAPAirespaceAPEntry 28 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- * bsnRogueClientPerRogueAPTable
|
|
-- *****************************************************************
|
|
|
|
bsnRogueClientPerRogueAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnRogueClientPerRogueAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rogue Clients for each rogue. This table lists all Rogue
|
|
Clients on a particular Rogue."
|
|
::= { bsnEss 16 }
|
|
|
|
bsnRogueClientPerRogueAPEntry OBJECT-TYPE
|
|
SYNTAX BsnRogueClientPerRogueAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in RogueClientPerRogueAPTable."
|
|
INDEX {
|
|
bsnRogueAPDot11MacAddr,
|
|
bsnRogueClientDot11MacAddr
|
|
}
|
|
::= { bsnRogueClientPerRogueAPTable 1 }
|
|
|
|
BsnRogueClientPerRogueAPEntry ::= SEQUENCE {
|
|
bsnRogueAPDot11MacAddr MacAddress,
|
|
bsnRogueClientDot11MacAddr MacAddress
|
|
}
|
|
|
|
bsnRogueAPDot11MacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address of the Rogue AP."
|
|
::= { bsnRogueClientPerRogueAPEntry 1 }
|
|
|
|
bsnRogueClientDot11MacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of the Rogue Client."
|
|
::= { bsnRogueClientPerRogueAPEntry 20 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnRougueClientTable
|
|
-- ********************************************************************
|
|
|
|
bsnRogueClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnRogueClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rogue Client Table. This table lists all the Rogue Clients
|
|
detected by Airespace APs."
|
|
::= { bsnEss 14 }
|
|
|
|
bsnRogueClientEntry OBJECT-TYPE
|
|
SYNTAX BsnRogueClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry in bsnRogueClientTable."
|
|
INDEX { bsnRogueClientDot11MacAddress }
|
|
::= { bsnRogueClientTable 1 }
|
|
|
|
BsnRogueClientEntry ::= SEQUENCE {
|
|
bsnRogueClientDot11MacAddress MacAddress,
|
|
bsnRogueClientTotalDetectingAPs Integer32,
|
|
bsnRogueClientFirstReported DisplayString,
|
|
bsnRogueClientLastReported DisplayString,
|
|
bsnRogueClientBSSID MacAddress,
|
|
bsnRogueClientContainmentLevel INTEGER,
|
|
bsnRogueClientLastHeard Integer32,
|
|
bsnRogueClientState INTEGER
|
|
}
|
|
|
|
bsnRogueClientDot11MacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac Address of Rogue Station."
|
|
::= { bsnRogueClientEntry 1 }
|
|
|
|
bsnRogueClientTotalDetectingAPs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Airespace APs that detected this
|
|
rogue."
|
|
::= { bsnRogueClientEntry 2 }
|
|
|
|
bsnRogueClientFirstReported OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time Stamp when this Rogue was First Detected."
|
|
::= { bsnRogueClientEntry 3 }
|
|
|
|
bsnRogueClientLastReported OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time Stamp when this Rogue was Last Detected."
|
|
::= { bsnRogueClientEntry 4 }
|
|
|
|
bsnRogueClientBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies BSSID of the Rogue Client."
|
|
::= { bsnRogueClientEntry 5 }
|
|
|
|
bsnRogueClientContainmentLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unassigned(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the state of the rogue is contained, this specifies
|
|
the level of containment. Higher the level, more the
|
|
number of detecting APs that are used to contain it.
|
|
The value must be between 1 to 4 for 'contained'
|
|
state."
|
|
::= { bsnRogueClientEntry 6 }
|
|
|
|
bsnRogueClientLastHeard OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds ago this rogue client was detected."
|
|
::= { bsnRogueClientEntry 7 }
|
|
|
|
bsnRogueClientState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initializing(0),
|
|
pending(1),
|
|
alert(2),
|
|
contained(6),
|
|
threat(7),
|
|
containedpending(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is use to specify the state in which
|
|
the Rogue AP is. User can set the Rogue Client in
|
|
alert,known or acknowledge state.
|
|
Alert state means Rogue Client can be a potential i
|
|
threat.Trap will be sent out to trap recipients.
|
|
Known state means its just internal Client which is
|
|
not on the same Switch.
|
|
Acknowledge state means an external Client whose
|
|
existence is acceptable and not a threat
|
|
(probably some other company's AP).
|
|
Contained means containement is initiated and
|
|
ongoing"
|
|
::= { bsnRogueClientEntry 24 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnRougueAPTable
|
|
-- ********************************************************************
|
|
|
|
bsnRogueClientAirespaceAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnRogueClientAirespaceAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rogue Station Table. This table lists all the Airespace AP
|
|
Interface that detected a particular Rogue."
|
|
::= { bsnEss 15 }
|
|
|
|
bsnRogueClientAirespaceAPEntry OBJECT-TYPE
|
|
SYNTAX BsnRogueClientAirespaceAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnRogueClientAirespaceAPEntry."
|
|
INDEX {
|
|
bsnRogueClientDot11MacAddress,
|
|
bsnRogueClientAirespaceAPMacAddress,
|
|
bsnRogueClientAirespaceAPSlotId
|
|
}
|
|
::= { bsnRogueClientAirespaceAPTable 1 }
|
|
|
|
BsnRogueClientAirespaceAPEntry ::= SEQUENCE {
|
|
bsnRogueClientAirespaceAPMacAddress MacAddress,
|
|
bsnRogueClientAirespaceAPSlotId Unsigned32,
|
|
bsnRogueClientRadioType INTEGER,
|
|
bsnRogueClientAirespaceAPName DisplayString,
|
|
bsnRogueClientChannelNumber Integer32,
|
|
bsnRogueClientAirespaceAPRSSI Integer32,
|
|
bsnRogueClientAirespaceAPLastHeard DisplayString,
|
|
bsnRogueClientAirespaceAPSNR Integer32
|
|
}
|
|
|
|
bsnRogueClientAirespaceAPMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac Address of Airespace AP Interface that Detected
|
|
the Rogue."
|
|
::= { bsnRogueClientAirespaceAPEntry 1 }
|
|
|
|
bsnRogueClientAirespaceAPSlotId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slotId of the Airespace AP Interface that detected the
|
|
Rogue."
|
|
::= { bsnRogueClientAirespaceAPEntry 2 }
|
|
|
|
bsnRogueClientRadioType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11b(1),
|
|
dot11a(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertised SSID that the Airespace AP Interface
|
|
picked up from the Rogue."
|
|
::= { bsnRogueClientAirespaceAPEntry 3 }
|
|
|
|
bsnRogueClientAirespaceAPName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of Airespace AP Interface that detected the
|
|
Rogue."
|
|
::= { bsnRogueClientAirespaceAPEntry 4 }
|
|
|
|
bsnRogueClientChannelNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertised Channel Number of that the Airespace
|
|
AP Interface picked up from the Rogue."
|
|
::= { bsnRogueClientAirespaceAPEntry 5 }
|
|
|
|
bsnRogueClientAirespaceAPRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSSI seen by Airespace AP Interface from the Rogue"
|
|
::= { bsnRogueClientAirespaceAPEntry 7 }
|
|
|
|
bsnRogueClientAirespaceAPLastHeard OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No of seconds ago when this Rogue was last heard by
|
|
this AP."
|
|
::= { bsnRogueClientAirespaceAPEntry 11 }
|
|
|
|
bsnRogueClientAirespaceAPSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNR seen by Airespace AP Interface from Rogue"
|
|
::= { bsnRogueClientAirespaceAPEntry 27 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * End of bsnRougueStationTable
|
|
-- ********************************************************************
|
|
--
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnThirdPartyAPTable
|
|
-- ********************************************************************
|
|
|
|
bsnThirdPartyAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnThirdPartyAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Third Party Access Point Table. An entry needs to be
|
|
configured in this table for a third party access point
|
|
that needs to be supported by the Switch. Note: A third
|
|
party ESS (Wlan) with ID 17 should be created in
|
|
bsnDot11EssTable before adding entries here.
|
|
Please also note that ACS currently supports only
|
|
Aironet 350, 1200 and Orinoco 2000 Access Points as
|
|
third party APs."
|
|
::= { bsnEss 9 }
|
|
|
|
bsnThirdPartyAPEntry OBJECT-TYPE
|
|
SYNTAX BsnThirdPartyAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An entry in bsnThirdPartyAPTable."
|
|
INDEX { bsnThirdPartyAPMacAddress }
|
|
::= { bsnThirdPartyAPTable 1 }
|
|
|
|
BsnThirdPartyAPEntry ::= SEQUENCE {
|
|
bsnThirdPartyAPMacAddress MacAddress,
|
|
bsnThirdPartyAPInterface Integer32,
|
|
bsnThirdPartyAPIpAddress IpAddress,
|
|
bsnThirdPartyAP802Dot1XRequired INTEGER,
|
|
bsnThirdPartyAPMirrorMode INTEGER,
|
|
bsnThirdPartyAPRowStatus RowStatus
|
|
}
|
|
|
|
bsnThirdPartyAPMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"MAC Address of Third Party Access Point which is
|
|
connected directly to this Airespace Switch."
|
|
::= { bsnThirdPartyAPEntry 1 }
|
|
|
|
bsnThirdPartyAPInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Interface(Port Number) to which the Third Party AP is
|
|
connected."
|
|
::= { bsnThirdPartyAPEntry 2 }
|
|
|
|
bsnThirdPartyAPIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Static IP address of the 3rd Party AP, 0.0.0.0 indicating
|
|
x its using DHCP"
|
|
DEFVAL { '00000000'H }
|
|
::= { bsnThirdPartyAPEntry 3 }
|
|
|
|
bsnThirdPartyAP802Dot1XRequired OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"If 802.1X is required for the 3rd Party AP"
|
|
DEFVAL { disable }
|
|
::= { bsnThirdPartyAPEntry 4 }
|
|
|
|
bsnThirdPartyAPMirrorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"If enabled, then data from all the foreign AP users and all
|
|
the foreign APs on this APs port will be mirrored. These
|
|
clients are dynamically added to the switch's mirrored MAC
|
|
list."
|
|
::= { bsnThirdPartyAPEntry 5 }
|
|
|
|
bsnThirdPartyAPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Row Status in the ThirdPartyAPEntry."
|
|
::= { bsnThirdPartyAPEntry 24 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Airespace AP Table.
|
|
-- * Rows in bsnAPTable are created by Airespace Switch as it
|
|
-- * discovers Airespace APs.
|
|
-- * The MAC address of the 802.3 interface constitutes the index.
|
|
-- *
|
|
-- ********************************************************************
|
|
|
|
bsnAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of Airespace APs managed by this Airespace Switch."
|
|
::= { bsnAP 1 }
|
|
|
|
bsnAPEntry OBJECT-TYPE
|
|
SYNTAX BsnAPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the bsnAPTable."
|
|
INDEX { bsnAPDot3MacAddress }
|
|
::= { bsnAPTable 1 }
|
|
|
|
BsnAPEntry ::= SEQUENCE {
|
|
bsnAPDot3MacAddress MacAddress,
|
|
bsnAPNumOfSlots INTEGER,
|
|
bsnAPName OCTET STRING,
|
|
bsnAPLocation OCTET STRING,
|
|
bsnAPMonitorOnlyMode INTEGER,
|
|
bsnAPOperationStatus INTEGER,
|
|
bsnAPSoftwareVersion DisplayString,
|
|
bsnAPBootVersion DisplayString,
|
|
bsnAPPrimaryMwarName OCTET STRING,
|
|
bsnAPReset INTEGER,
|
|
bsnAPStatsTimer INTEGER,
|
|
bsnAPPortNumber INTEGER,
|
|
bsnAPModel DisplayString,
|
|
bsnAPSerialNumber DisplayString,
|
|
bsnAPClearConfig INTEGER,
|
|
bsnApIpAddress IpAddress,
|
|
bsnAPMirrorMode INTEGER,
|
|
bsnAPRemoteModeSupport INTEGER,
|
|
bsnAPType INTEGER,
|
|
bsnAPSecondaryMwarName OCTET STRING,
|
|
bsnAPTertiaryMwarName OCTET STRING,
|
|
bsnAPIsStaticIP INTEGER,
|
|
bsnAPNetmask IpAddress,
|
|
bsnAPGateway IpAddress,
|
|
bsnAPStaticIPAddress IpAddress,
|
|
bsnAPBridgingSupport INTEGER,
|
|
bsnAPGroupVlanName OCTET STRING,
|
|
bsnAPIOSVersion DisplayString,
|
|
bsnAPCertificateType INTEGER,
|
|
bsnAPEthernetMacAddress MacAddress,
|
|
bsnAPAdminStatus INTEGER
|
|
}
|
|
|
|
bsnAPDot3MacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of an AP."
|
|
::= { bsnAPEntry 1 }
|
|
|
|
bsnAPNumOfSlots OBJECT-TYPE
|
|
SYNTAX INTEGER (0..24)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Radio Interfaces on the Airespace AP.
|
|
Currently maximum two interfaces are supported.
|
|
One would be of type 802.11a and other of type
|
|
802.11b/g."
|
|
::= { bsnAPEntry 2 }
|
|
|
|
bsnAPName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name assigned to this AP. If an AP is not configured its
|
|
factory default name will be ap:<last three byte of
|
|
MACAddress> eg. ap:af:12:be"
|
|
::= { bsnAPEntry 3 }
|
|
|
|
bsnAPLocation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User specified location of this AP.
|
|
While configuring AP, user should specify a location for
|
|
the AP so that its easy to figure out for some one where
|
|
the AP is located."
|
|
::= { bsnAPEntry 4 }
|
|
|
|
bsnAPMonitorOnlyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(0),
|
|
monitor(1),
|
|
remote(2),
|
|
roguedetector(3),
|
|
sniffer(4),
|
|
bridge(5),
|
|
seConnect(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Monitor Only Mode Setting."
|
|
::= { bsnAPEntry 5 }
|
|
|
|
bsnAPOperationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
associated(1),
|
|
disassociating(2),
|
|
downloading(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operation State of the AP. When AP associates with the
|
|
Airespace Switch its state will be associated. When Airespace
|
|
AP is disassociated from the Switch, its state will be
|
|
disassociating. The state is downloading when the AP is
|
|
downloading its firmware."
|
|
::= { bsnAPEntry 6 }
|
|
|
|
bsnAPSoftwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Major Minor Software Version of AP"
|
|
::= { bsnAPEntry 8 }
|
|
|
|
bsnAPBootVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Major Minor Boot Version of AP"
|
|
::= { bsnAPEntry 9 }
|
|
|
|
bsnAPPrimaryMwarName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"sysName of the Airespace Switch which is suppose to be the
|
|
Primary MWAR(switch) of the AP with which AP should associate.
|
|
This work when AP is not directly connected to Airespace Switch,
|
|
it tries to find Primary Switch and associates with it. If
|
|
this attribute is left empty or AP is not able to find the
|
|
Airespace Switch with this name, then it will associate with
|
|
Secondary Switch."
|
|
::= { bsnAPEntry 10 }
|
|
|
|
bsnAPReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
default(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this attribute to reset the AP.
|
|
When it comes up it will try to associate with the
|
|
Primary Switch if that is set, else it will associate with the
|
|
Master Switch. Reading this attribute will always return 0"
|
|
::= { bsnAPEntry 11 }
|
|
|
|
bsnAPStatsTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the time interval in secs after which
|
|
bsnAPDot11Counters Stats is sent from AP to Switch. If not
|
|
configured this value is 0 which means never send the stats."
|
|
::= { bsnAPEntry 12 }
|
|
|
|
bsnAPPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port on the Switch on which this APs traffic is coming
|
|
through."
|
|
::= { bsnAPEntry 13 }
|
|
|
|
bsnAPModel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP Model"
|
|
::= { bsnAPEntry 16 }
|
|
|
|
bsnAPSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP Serial Number."
|
|
::= { bsnAPEntry 17 }
|
|
|
|
bsnAPClearConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1),
|
|
default(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this attribute to clear AP configuration
|
|
and reset it to factory defaults.
|
|
Reading this attribute will always return 0"
|
|
::= { bsnAPEntry 18 }
|
|
|
|
bsnApIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the AP. This will not be available when
|
|
the switch is operating in the Layer2 mode. In this case,
|
|
the attribute will return 0 as value."
|
|
::= { bsnAPEntry 19 }
|
|
|
|
bsnAPMirrorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled, then this AP's Client's Data is mirrored and this
|
|
AP's clients are dynamically added to the switch's mirrored
|
|
MAC list."
|
|
::= { bsnAPEntry 20 }
|
|
|
|
bsnAPRemoteModeSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies if the the Remote Mode is supported on this
|
|
AP or not. If supported user can set bsnAPMonitorOnlyMode to
|
|
remote. Otherwise not."
|
|
::= { bsnAPEntry 21 }
|
|
|
|
bsnAPType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ap1000(1),
|
|
ap1030(2),
|
|
mimo(3),
|
|
unknown(4),
|
|
ap1100(5),
|
|
ap1130(6),
|
|
ap1240(7),
|
|
ap1200(8),
|
|
ap1310(9),
|
|
ap1500(10),
|
|
ap1250(11),
|
|
ap1505(12),
|
|
ap3201(13),
|
|
ap1520(14),
|
|
ap800(15),
|
|
ap1140(16),
|
|
ap800agn(17),
|
|
ap3500i(18),
|
|
ap3500e(19),
|
|
ap1260(20)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the model of the AP in enumeration."
|
|
::= { bsnAPEntry 22 }
|
|
|
|
bsnAPSecondaryMwarName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"sysName of the Airespace Switch which is suppose to be the
|
|
Secondary MWAR(switch) of the AP with which AP should associate
|
|
if Primary Switch(configured through bsnAPPrimaryMwarName)
|
|
is not available. If primary and secondary switches are not
|
|
available then AP will associate with the tertiary switch."
|
|
::= { bsnAPEntry 23 }
|
|
|
|
bsnAPTertiaryMwarName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"sysName of the Airespace Switch which is suppose to be the
|
|
Tertiary MWAR(switch) of the AP with which AP should associate.
|
|
If primary,secondary and tertiary switch are not available
|
|
then it will associate with Master Switch."
|
|
::= { bsnAPEntry 24 }
|
|
|
|
bsnAPIsStaticIP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag when disabled implies that AP will use DHCP to get
|
|
the IP address. However, if it is enabled, then user should
|
|
enter the IPAddress, Netmask and Gateway."
|
|
DEFVAL { disable }
|
|
::= { bsnAPEntry 25 }
|
|
|
|
bsnAPNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Netmask of the IP address of the AP."
|
|
::= { bsnAPEntry 26 }
|
|
|
|
bsnAPGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Gateway for the AP."
|
|
::= { bsnAPEntry 27 }
|
|
|
|
bsnAPStaticIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Static IP-Address configuration for the AP.
|
|
This can only be changed when the LWAPP mode is in Layer-3."
|
|
::= { bsnAPEntry 28 }
|
|
|
|
bsnAPBridgingSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies if this AP is a Bridging AP. Bridging APs
|
|
can be used in Bridging or Mesh network configurations."
|
|
::= { bsnAPEntry 29 }
|
|
|
|
bsnAPGroupVlanName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AP Group to which this AP has been associated with.
|
|
If it is empty, then no AP Group overriding has been set."
|
|
::= { bsnAPEntry 30 }
|
|
|
|
bsnAPIOSVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IOS Version of IOS Cisco AP. Zero length string will be
|
|
returned for other APs"
|
|
::= { bsnAPEntry 31 }
|
|
|
|
bsnAPCertificateType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
manufactureinstalled(1),
|
|
selfsigned(2),
|
|
localsignificance(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enum values denoting AP Certificate Type.
|
|
1 : manufactureinstalled : Manufacture Installed Certificate
|
|
type (MIC).
|
|
2 : selfsigned : Self Signed Certificate type (SSC).
|
|
3 : localsignificance : Local Significance."
|
|
::= { bsnAPEntry 32 }
|
|
|
|
bsnAPEthernetMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ethernet MAC address of the AP."
|
|
::= { bsnAPEntry 33 }
|
|
|
|
bsnAPAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Admin State of the AP"
|
|
::= { bsnAPEntry 37 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * BSN Airespace AP Interface Table
|
|
-- * Rows in this table are created by Airespace Switch as it
|
|
-- * discovers and associates with the Airespace APEs
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents an 802.11 interface in an Airespace
|
|
AP."
|
|
::= { bsnAP 2 }
|
|
|
|
bsnAPIfEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnAPIfTable."
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfTable 1 }
|
|
|
|
BsnAPIfEntry ::= SEQUENCE {
|
|
bsnAPIfSlotId Unsigned32,
|
|
bsnAPIfType INTEGER,
|
|
bsnAPIfPhyChannelAssignment INTEGER,
|
|
bsnAPIfPhyChannelNumber INTEGER,
|
|
bsnAPIfPhyTxPowerControl INTEGER,
|
|
bsnAPIfPhyTxPowerLevel INTEGER,
|
|
bsnAPIfPhyAntennaMode INTEGER,
|
|
bsnAPIfPhyAntennaType INTEGER,
|
|
bsnAPIfPhyAntennaDiversity INTEGER,
|
|
bsnAPIfCellSiteConfigId Unsigned32,
|
|
bsnAPIfNumberOfVaps INTEGER,
|
|
bsnAPIfOperStatus INTEGER,
|
|
bsnAPIfPortNumber INTEGER,
|
|
bsnAPIfPhyAntennaOptions INTEGER,
|
|
bsnApIfNoOfUsers Counter32,
|
|
bsnAPIfWlanOverride INTEGER,
|
|
bsnAPIfPacketsSniffingFeature INTEGER,
|
|
bsnAPIfSniffChannel INTEGER,
|
|
bsnAPIfSniffServerIPAddress IpAddress,
|
|
bsnAPIfAntennaGain INTEGER,
|
|
bsnAPIfChannelList DisplayString,
|
|
bsnAPIfAbsolutePowerList DisplayString,
|
|
bsnAPIfRegulatoryDomainSupport INTEGER,
|
|
bsnAPIfAdminStatus INTEGER
|
|
}
|
|
|
|
bsnAPIfSlotId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slotId of this interface."
|
|
::= { bsnAPIfEntry 1 }
|
|
|
|
bsnAPIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11b(1),
|
|
dot11a(2),
|
|
uwb(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this interface. dot11b also implies 802.11b/g."
|
|
::= { bsnAPIfEntry 2 }
|
|
|
|
bsnAPIfPhyChannelAssignment OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
customized(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this value is true, then bsnAPDot11CurrentChannel in
|
|
bsnAPIfDot11PhyDSSSTable is assigned by dynamic
|
|
algorithm and is read-only."
|
|
::= { bsnAPIfEntry 3 }
|
|
|
|
bsnAPIfPhyChannelNumber OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ch1(1),
|
|
ch2(2),
|
|
ch3(3),
|
|
ch4(4),
|
|
ch5(5),
|
|
ch6(6),
|
|
ch7(7),
|
|
ch8(8),
|
|
ch9(9),
|
|
ch10(10),
|
|
ch11(11),
|
|
ch12(12),
|
|
ch13(13),
|
|
ch14(14),
|
|
ch20(20),
|
|
ch21(21),
|
|
ch22(22),
|
|
ch23(23),
|
|
ch24(24),
|
|
ch25(25),
|
|
ch26(26),
|
|
ch34(34),
|
|
ch36(36),
|
|
ch38(38),
|
|
ch40(40),
|
|
ch42(42),
|
|
ch44(44),
|
|
ch46(46),
|
|
ch48(48),
|
|
ch52(52),
|
|
ch56(56),
|
|
ch60(60),
|
|
ch64(64),
|
|
ch100(100),
|
|
ch104(104),
|
|
ch108(108),
|
|
ch112(112),
|
|
ch116(116),
|
|
ch120(120),
|
|
ch124(124),
|
|
ch128(128),
|
|
ch132(132),
|
|
ch136(136),
|
|
ch140(140),
|
|
ch149(149),
|
|
ch153(153),
|
|
ch157(157),
|
|
ch161(161),
|
|
ch165(165),
|
|
ch169(169)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current channel number of the AP Interface.
|
|
Channel numbers will be from 1 to 14 for 802.11b interface type.
|
|
Channel numbers will be from 34 to 169 for 802.11a interface
|
|
type. Allowed channel numbers also depends on the current
|
|
Country Code set in the Switch. This attribute cannot be set
|
|
unless bsnAPIfPhyChannelAssignment is set to customized else
|
|
this attribute gets assigned by dynamic algorithm."
|
|
::= { bsnAPIfEntry 4 }
|
|
|
|
bsnAPIfPhyTxPowerControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
customized(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this value is true, then bsnAPIfPhyTxPowerLevel
|
|
is assigned by dynamic algorithm and is read-only."
|
|
::= { bsnAPIfEntry 5 }
|
|
|
|
bsnAPIfPhyTxPowerLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TxPowerLevel currently being used to transmit data.
|
|
Some PHYs also use this value to determine the receiver
|
|
sensitivity requirements for CCA. Valid values are between
|
|
1 to 8,depnding on what radio, and this attribute can be
|
|
set only if bsnAPIfPhyTxPowerControl is set to customized."
|
|
::= { bsnAPIfEntry 6 }
|
|
|
|
bsnAPIfPhyAntennaMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sectorA(1),
|
|
sectorB(2),
|
|
omni(3),
|
|
notapplicable(99)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Antenna Mode of the AP Interface.
|
|
For 802.11a this attribute will always be omni for now.
|
|
This attribute doesn't apply to interface of type 802.11b."
|
|
::= { bsnAPIfEntry 7 }
|
|
|
|
bsnAPIfPhyAntennaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal(1),
|
|
external(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specified if the Antenna currently used by AP
|
|
Radio is internal or external. For 802.11a the antenna is always
|
|
internal. For 802.11b you can set antenna type to be external or
|
|
internal."
|
|
::= { bsnAPIfEntry 8 }
|
|
|
|
bsnAPIfPhyAntennaDiversity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
connectorA(0),
|
|
connectorB(1),
|
|
enabled(255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Diversity doesn't apply to AP Radio of type 802.11a.
|
|
For 802.11b you can set it to connectorA, connectorB or enabled."
|
|
::= { bsnAPIfEntry 9 }
|
|
|
|
bsnAPIfCellSiteConfigId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In a cell site configuration, this would be the cell Id of
|
|
this AP Interface"
|
|
::= { bsnAPIfEntry 10 }
|
|
|
|
bsnAPIfNumberOfVaps OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of WLANs currently active on this AP Interface."
|
|
::= { bsnAPIfEntry 11 }
|
|
|
|
bsnAPIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
up(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status of the interface."
|
|
::= { bsnAPIfEntry 12 }
|
|
|
|
bsnAPIfPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port number on Airespace Switch on which the traffic from this AP
|
|
interface is received."
|
|
::= { bsnAPIfEntry 13 }
|
|
|
|
bsnAPIfPhyAntennaOptions OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internalAndExternal(0),
|
|
internal(1),
|
|
siacAp(2),
|
|
external(3),
|
|
ext11bInt11a(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the Antenna types supported by the AP
|
|
Radio whether it is internal or external or both.
|
|
internalAndExternal(0)- internal and external antenna for both
|
|
11a and 11b
|
|
internal(1) - only internal antenna is allowed.
|
|
siacAp- 11b internal and 11a external
|
|
external - only external antenna is allowed for 11a and 11b
|
|
ext11bInt11a - external antenna for 11b and internal antenna for
|
|
11a."
|
|
::= { bsnAPIfEntry 14 }
|
|
|
|
bsnApIfNoOfUsers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No of Users associated with this radio."
|
|
::= { bsnAPIfEntry 15 }
|
|
|
|
bsnAPIfWlanOverride OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag when disabled implies that all WLANs are available
|
|
from this radio.
|
|
However, if this is enabled, then only those WLANs that appear
|
|
in the bsnApIfWlanOverrideTable will be available from this
|
|
radio."
|
|
::= { bsnAPIfEntry 16 }
|
|
|
|
bsnAPIfPacketsSniffingFeature OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag when enabled implies that AP will sniff the 802.11a/bg
|
|
packets. However, if it is enabled, then user should enter the
|
|
server-ip-address on which Airopeek is running and the
|
|
802.11a/bg-channel-number to be sniffed.
|
|
The above feature will work only when AP is in 'Sniffer' mode."
|
|
DEFVAL { disable }
|
|
::= { bsnAPIfEntry 17 }
|
|
|
|
bsnAPIfSniffChannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ch0(0),
|
|
ch1(1),
|
|
ch2(2),
|
|
ch3(3),
|
|
ch4(4),
|
|
ch5(5),
|
|
ch6(6),
|
|
ch7(7),
|
|
ch8(8),
|
|
ch9(9),
|
|
ch10(10),
|
|
ch11(11),
|
|
ch12(12),
|
|
ch13(13),
|
|
ch14(14),
|
|
ch20(20),
|
|
ch21(21),
|
|
ch22(22),
|
|
ch23(23),
|
|
ch24(24),
|
|
ch25(25),
|
|
ch26(26),
|
|
ch34(34),
|
|
ch36(36),
|
|
ch38(38),
|
|
ch40(40),
|
|
ch42(42),
|
|
ch44(44),
|
|
ch46(46),
|
|
ch48(48),
|
|
ch52(52),
|
|
ch56(56),
|
|
ch60(60),
|
|
ch64(64),
|
|
ch100(100),
|
|
ch104(104),
|
|
ch108(108),
|
|
ch112(112),
|
|
ch116(116),
|
|
ch120(120),
|
|
ch124(124),
|
|
ch128(128),
|
|
ch132(132),
|
|
ch136(136),
|
|
ch140(140),
|
|
ch149(149),
|
|
ch153(153),
|
|
ch157(157),
|
|
ch161(161),
|
|
ch165(165),
|
|
ch169(169)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This the 802.11a/bg-channel-number on which AP will sniff
|
|
the packets."
|
|
::= { bsnAPIfEntry 18 }
|
|
|
|
bsnAPIfSniffServerIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The machine ip address on which Airopeek application is running."
|
|
::= { bsnAPIfEntry 19 }
|
|
|
|
bsnAPIfAntennaGain OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents antenna gain in multiple of 0.5 dBm. An integer
|
|
value 4 means 4 x 0.5 = 2 dBm of gain"
|
|
::= { bsnAPIfEntry 20 }
|
|
|
|
bsnAPIfChannelList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of comma separated channels supported by this radio."
|
|
::= { bsnAPIfEntry 21 }
|
|
|
|
bsnAPIfAbsolutePowerList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of comma separated absolute power levels supported by this
|
|
radio."
|
|
::= { bsnAPIfEntry 22 }
|
|
|
|
bsnAPIfRegulatoryDomainSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(0),
|
|
supported(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the regulatory domain on radio is supported or notSupported
|
|
on the controller"
|
|
::= { bsnAPIfEntry 23 }
|
|
|
|
bsnAPIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(2),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Admin status of the interface."
|
|
::= { bsnAPIfEntry 34 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * End of bsnAPIfTable
|
|
-- *******************************************************************
|
|
--
|
|
|
|
-- *******************************************************************
|
|
-- * BSN Airespace AP WLAN Override Table
|
|
-- * Rows in this table can be created or deleted by the management
|
|
-- * user of the switch.
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfWlanOverrideTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfWlanOverrideEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents an SSID added to the AP when the
|
|
attribute bsnAPIfWlanOverride on the radio is enabled.
|
|
This means only those WLANs on the switch that are added to
|
|
this table will be available on such a radio."
|
|
::= { bsnAP 21 }
|
|
|
|
bsnAPIfWlanOverrideEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfWlanOverrideEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnAPIfWlanOverrideTable"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfWlanOverrideId
|
|
}
|
|
::= { bsnAPIfWlanOverrideTable 1 }
|
|
|
|
BsnAPIfWlanOverrideEntry ::= SEQUENCE {
|
|
bsnAPIfWlanOverrideId Unsigned32,
|
|
bsnAPIfWlanOverrideSsid DisplayString,
|
|
bsnAPIfWlanOverrideRowStatus RowStatus
|
|
}
|
|
|
|
bsnAPIfWlanOverrideId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..16)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the WLAN (bsnDot11EssIndex) added to the radio.
|
|
Airespace Switch supports 16 Airespace WLANs so index
|
|
will be from 1 to 16."
|
|
::= { bsnAPIfWlanOverrideEntry 1 }
|
|
|
|
bsnAPIfWlanOverrideSsid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SSID assigned to the override WLAN."
|
|
::= { bsnAPIfWlanOverrideEntry 2 }
|
|
|
|
bsnAPIfWlanOverrideRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row status type for the bsnAPIfWlanOverrideEntry"
|
|
::= { bsnAPIfWlanOverrideEntry 15 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * BSN Airespace AP Smt Param Table
|
|
-- * Rows in this table are created by Airespace Switch as it
|
|
-- * discovers and associates with the Airespace APs
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfSmtParamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfSmtParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents SMT parameters on an 802.11 interface
|
|
of an Airespace AP."
|
|
::= { bsnAP 3 }
|
|
|
|
bsnAPIfSmtParamEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfSmtParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnAPIfSmtParamTable"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfSmtParamTable 1 }
|
|
|
|
BsnAPIfSmtParamEntry ::= SEQUENCE {
|
|
bsnAPIfDot11BeaconPeriod INTEGER,
|
|
bsnAPIfDot11MediumOccupancyLimit INTEGER,
|
|
bsnAPIfDot11CFPPeriod INTEGER,
|
|
bsnAPIfDot11CFPMaxDuration INTEGER,
|
|
bsnAPIfDot11OperationalRateSet OCTET STRING,
|
|
bsnAPIfDot11DTIMPeriod INTEGER,
|
|
bsnAPIfDot11MultiDomainCapabilityImplemented INTEGER,
|
|
bsnAPIfDot11MultiDomainCapabilityEnabled INTEGER,
|
|
bsnAPIfDot11CountryString OCTET STRING,
|
|
bsnAPIfDot11SmtParamsConfigType INTEGER,
|
|
bsnAPIfDot11BSSID MacAddress
|
|
}
|
|
|
|
bsnAPIfDot11BeaconPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (20..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of TU that a
|
|
AP Interface shall use for scheduling Beacon tranmissions.
|
|
This value is transmitted in Beacon and Probe Response
|
|
frames."
|
|
::= { bsnAPIfSmtParamEntry 1 }
|
|
|
|
bsnAPIfDot11MediumOccupancyLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum amount of time,
|
|
in TU, that a point coordinator may control the usage of
|
|
the wireless medium without relinquishing control for long
|
|
enough to allow at least one instance of DCF access to the
|
|
medium. The default value of this attribute shall be 100,
|
|
and the maximum value shall be 1000."
|
|
::= { bsnAPIfSmtParamEntry 2 }
|
|
|
|
bsnAPIfDot11CFPPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The attribute shall describe the number of DTIM intervals
|
|
between the start of CFPs. It is modified by
|
|
MLME-START.request primitive."
|
|
::= { bsnAPIfSmtParamEntry 3 }
|
|
|
|
bsnAPIfDot11CFPMaxDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The attribute shall describe the maximum duration of the CFP
|
|
in TU that may be generated by the PCF. It is modified by
|
|
MLME-START.request primitive."
|
|
::= { bsnAPIfSmtParamEntry 4 }
|
|
|
|
bsnAPIfDot11OperationalRateSet OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..126))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the set of data rates
|
|
at which the AP Interface may transmit data. Each octet
|
|
contains a value representing a rate. Each rate
|
|
shall be within the range from 2 to 127,
|
|
corresponding to data rates in increments of
|
|
500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be
|
|
supported (as indicated in the supported rates
|
|
table) for receiving data. This value is reported in
|
|
transmitted Beacon, Probe Request, Probe Response,
|
|
Association Request, Association Response,
|
|
Reassociation Request, and Reassociation Response
|
|
frames, and is used to determine whether a BSS
|
|
with which the AP Interface desires to synchronize is
|
|
suitable. It is also used when starting a BSS,
|
|
as specified in 10.3."
|
|
::= { bsnAPIfSmtParamEntry 5 }
|
|
|
|
bsnAPIfDot11DTIMPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of beacon
|
|
intervals that shall elapse between transmission of
|
|
Beacons frames containing a TIM element whose DTIM
|
|
Count field is 0. This value is transmitted in
|
|
the DTIM Period field of Beacon frames."
|
|
::= { bsnAPIfSmtParamEntry 6 }
|
|
|
|
bsnAPIfDot11MultiDomainCapabilityImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notimplemented(0),
|
|
implemented(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the
|
|
AP Interface implementation is capable of supporting
|
|
multiple regulatory domains. The capability is
|
|
disabled, otherwise. The default value of this
|
|
attribute is FALSE."
|
|
::= { bsnAPIfSmtParamEntry 7 }
|
|
|
|
bsnAPIfDot11MultiDomainCapabilityEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the
|
|
capability of the AP Interface to operate in
|
|
multiple regulatory domains is enabled. The
|
|
capability is disabled, otherwise. The default
|
|
value of this attribute is FALSE."
|
|
::= { bsnAPIfSmtParamEntry 8 }
|
|
|
|
bsnAPIfDot11CountryString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (3))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute identifies the country in which the
|
|
AP Interface is operating. The first two octets of
|
|
this string is the two character country code as
|
|
described in document ISO/IEC 3166-1. The third octet
|
|
shall be one of the following:
|
|
|
|
1. an ASCII space character, if the regulations under
|
|
which the AP Interface is operating encompass all
|
|
environments in the country,
|
|
|
|
2. an ASCII 'O' character, if the regulations under
|
|
which the AP Interface is operating are for an Outdoor
|
|
environment only, or
|
|
|
|
3. an ASCII 'I' character, if the regulations under
|
|
which the AP Interface is operating are for an Indoor
|
|
environment only."
|
|
::= { bsnAPIfSmtParamEntry 9 }
|
|
|
|
bsnAPIfDot11SmtParamsConfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(0),
|
|
customized(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute suggests if the Station parameters for
|
|
this radio are automatically set or have been
|
|
customized."
|
|
::= { bsnAPIfSmtParamEntry 10 }
|
|
|
|
bsnAPIfDot11BSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BSSID of this AP config which would be the MAC Address of AP"
|
|
::= { bsnAPIfSmtParamEntry 30 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * bsnAPIfMultiDomainCapabilityTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfMultiDomainCapabilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfMultiDomainCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents an 803.2 or an 802.11 interface in an
|
|
Airespace AP."
|
|
::= { bsnAP 4 }
|
|
|
|
bsnAPIfMultiDomainCapabilityEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfMultiDomainCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents an 803.2 or an 802.11 interface in an
|
|
Airespace AP."
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfMultiDomainCapabilityTable 1 }
|
|
|
|
BsnAPIfMultiDomainCapabilityEntry ::= SEQUENCE {
|
|
bsnAPIfDot11MaximumTransmitPowerLevel Integer32,
|
|
bsnAPIfDot11FirstChannelNumber Integer32,
|
|
bsnAPIfDot11NumberofChannels Integer32
|
|
}
|
|
|
|
bsnAPIfDot11MaximumTransmitPowerLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum transmit power,
|
|
in dBm, allowed in the subband for the associated domain
|
|
country string. The default value of this attribute shall
|
|
be zero."
|
|
::= { bsnAPIfMultiDomainCapabilityEntry 1 }
|
|
|
|
bsnAPIfDot11FirstChannelNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the value of the lowest
|
|
channel number in the subband for the associated domain
|
|
country string. The default value of this attribute shall
|
|
be zero."
|
|
::= { bsnAPIfMultiDomainCapabilityEntry 2 }
|
|
|
|
bsnAPIfDot11NumberofChannels OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the value of the total
|
|
number of channels allowed in the subband for the
|
|
associated domain country string. The default value
|
|
of this attribute shall be zero."
|
|
::= { bsnAPIfMultiDomainCapabilityEntry 20 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * bsnDot11MacOperationTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfMacOperationParamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfMacOperationParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group contains MAC attributes pertaining to the operation
|
|
of the MAC. These would be read only attributes as they
|
|
would be updated by RRM Dynamic Algorithm. If user needs
|
|
to configure them then they can only be configured
|
|
globally"
|
|
::= { bsnAP 5 }
|
|
|
|
bsnAPIfMacOperationParamEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfMacOperationParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the bsnAPIfMacOperationParamEntry Table.
|
|
Interface tables in this MIB module are indexed
|
|
by bsnAPDot3MacAddress, bsnAPIfSlotId."
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfMacOperationParamTable 1 }
|
|
|
|
BsnAPIfMacOperationParamEntry ::= SEQUENCE {
|
|
bsnAPIfDot11MacRTSThreshold INTEGER,
|
|
bsnAPIfDot11MacShortRetryLimit INTEGER,
|
|
bsnAPIfDot11MacLongRetryLimit INTEGER,
|
|
bsnAPIfDot11MacFragmentationThreshold INTEGER,
|
|
bsnAPIfDot11MacMaxTransmitMSDULifetime Unsigned32,
|
|
bsnAPIfDot11MacParamsConfigType INTEGER,
|
|
bsnAPIfDot11MacMaxReceiveLifetime Unsigned32
|
|
}
|
|
|
|
bsnAPIfDot11MacRTSThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2347)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If bsnAPIfMacParamsAutomaticOn is true then this is
|
|
read only parameter updated by RRM dynamic algorithm"
|
|
::= { bsnAPIfMacOperationParamEntry 1 }
|
|
|
|
bsnAPIfDot11MacShortRetryLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If bsnAPIfMacParamsAutomaticOn is true then this is
|
|
read only parameter updated by RRM dynamic algorithm"
|
|
::= { bsnAPIfMacOperationParamEntry 2 }
|
|
|
|
bsnAPIfDot11MacLongRetryLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If bsnAPIfMacParamsAutomaticOn is true then this is
|
|
read only parameter updated by RRM dynamic algorithm"
|
|
::= { bsnAPIfMacOperationParamEntry 3 }
|
|
|
|
bsnAPIfDot11MacFragmentationThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (256..2346)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If bsnAPIfMacParamsAutomaticOn is true then this is
|
|
read only parameter updated by RRM dynamic algorithm"
|
|
::= { bsnAPIfMacOperationParamEntry 4 }
|
|
|
|
bsnAPIfDot11MacMaxTransmitMSDULifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If bsnAPIfMacParamsAutomaticOn is true then this is
|
|
read only parameter updated by RRM dynamic algorithm"
|
|
::= { bsnAPIfMacOperationParamEntry 5 }
|
|
|
|
bsnAPIfDot11MacParamsConfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(0),
|
|
customized(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute suggests if the MAC parameters for this
|
|
radio are automatically set or have been customized."
|
|
::= { bsnAPIfMacOperationParamEntry 6 }
|
|
|
|
bsnAPIfDot11MacMaxReceiveLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If bsnAPIfMacParamsAutomaticOn is true then this is
|
|
read only parameter updated by RRM dynamic algorithm"
|
|
::= { bsnAPIfMacOperationParamEntry 25 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Begin of bsnAPIfDot11CountersTable
|
|
-- *******************************************************************
|
|
|
|
bsnAPIfDot11CountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfDot11CountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group containing attributes that are MAC counters.
|
|
Each instance represents counters on a AP dot11 interface"
|
|
::= { bsnAP 6 }
|
|
|
|
bsnAPIfDot11CountersEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfDot11CountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the dot11CountersEntry Table.
|
|
Interface tables in this MIB module are indexed
|
|
by bsnAPDot3MacAddress and bsnAPIfSlotId"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfDot11CountersTable 1 }
|
|
|
|
BsnAPIfDot11CountersEntry ::= SEQUENCE {
|
|
bsnAPIfDot11TransmittedFragmentCount Counter32,
|
|
bsnAPIfDot11MulticastTransmittedFrameCount Counter32,
|
|
bsnAPIfDot11RetryCount Counter32,
|
|
bsnAPIfDot11MultipleRetryCount Counter32,
|
|
bsnAPIfDot11FrameDuplicateCount Counter32,
|
|
bsnAPIfDot11RTSSuccessCount Counter32,
|
|
bsnAPIfDot11RTSFailureCount Counter32,
|
|
bsnAPIfDot11ACKFailureCount Counter32,
|
|
bsnAPIfDot11ReceivedFragmentCount Counter32,
|
|
bsnAPIfDot11MulticastReceivedFrameCount Counter32,
|
|
bsnAPIfDot11FCSErrorCount Counter32,
|
|
bsnAPIfDot11TransmittedFrameCount Counter32,
|
|
bsnAPIfDot11WEPUndecryptableCount Counter32,
|
|
bsnAPIfDot11FailedCount Counter32
|
|
}
|
|
|
|
bsnAPIfDot11TransmittedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall be incremented for an acknowledged MPDU
|
|
with an individual address in the address 1 field or an MPDU
|
|
with a multicast address in the address 1 field of type Data
|
|
or Management."
|
|
::= { bsnAPIfDot11CountersEntry 1 }
|
|
|
|
bsnAPIfDot11MulticastTransmittedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment only when the multicast bit
|
|
is set in the destination MAC address of a successfully
|
|
transmitted MSDU. When operating as a STA in an ESS, where
|
|
these frames are directed to the AP, this implies having
|
|
received an acknowledgment to all associated MPDUs."
|
|
::= { bsnAPIfDot11CountersEntry 2 }
|
|
|
|
bsnAPIfDot11RetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when an MSDU is successfully
|
|
transmitted after one or more retransmissions."
|
|
::= { bsnAPIfDot11CountersEntry 3 }
|
|
|
|
bsnAPIfDot11MultipleRetryCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when an MSDU is successfully
|
|
transmitted after more than one retransmission."
|
|
::= { bsnAPIfDot11CountersEntry 4 }
|
|
|
|
bsnAPIfDot11FrameDuplicateCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when a frame is received
|
|
that the Sequence Control field indicates is a
|
|
duplicate."
|
|
::= { bsnAPIfDot11CountersEntry 5 }
|
|
|
|
bsnAPIfDot11RTSSuccessCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when a CTS is received in
|
|
response to an RTS."
|
|
::= { bsnAPIfDot11CountersEntry 6 }
|
|
|
|
bsnAPIfDot11RTSFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when a CTS is not received in
|
|
response to an RTS."
|
|
::= { bsnAPIfDot11CountersEntry 7 }
|
|
|
|
bsnAPIfDot11ACKFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when an ACK is not received
|
|
when expected."
|
|
::= { bsnAPIfDot11CountersEntry 8 }
|
|
|
|
bsnAPIfDot11ReceivedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall be incremented for each successfully
|
|
received MPDU of type Data or Management."
|
|
::= { bsnAPIfDot11CountersEntry 9 }
|
|
|
|
bsnAPIfDot11MulticastReceivedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when a MSDU is received
|
|
with the multicast bit set in the destination
|
|
MAC address."
|
|
::= { bsnAPIfDot11CountersEntry 10 }
|
|
|
|
bsnAPIfDot11FCSErrorCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when an FCS error is
|
|
detected in a received MPDU."
|
|
::= { bsnAPIfDot11CountersEntry 11 }
|
|
|
|
bsnAPIfDot11TransmittedFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment for each successfully
|
|
transmitted MSDU."
|
|
::= { bsnAPIfDot11CountersEntry 12 }
|
|
|
|
bsnAPIfDot11WEPUndecryptableCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when a frame is received with
|
|
the WEP subfield of the Frame Control field set to one and the
|
|
WEPOn value for the key mapped to the TA's MAC address
|
|
indicates that the frame should not have been encrypted or
|
|
that frame is discarded due to the receiving STA not
|
|
implementing the privacy option."
|
|
::= { bsnAPIfDot11CountersEntry 13 }
|
|
|
|
bsnAPIfDot11FailedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter shall increment when an MSDU is not transmitted
|
|
successfully due to the number of transmit attempts exceeding
|
|
either the bsnAPIfDot11ShortRetryLimit or dot11LongRetryLimit."
|
|
::= { bsnAPIfDot11CountersEntry 33 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * End of bsnAPIfCountersTable
|
|
-- *******************************************************************
|
|
--
|
|
|
|
-- **********************************************************************
|
|
-- * bsnAPIfDot11PhyTxPower TABLE
|
|
-- **********************************************************************
|
|
|
|
bsnAPIfDot11PhyTxPowerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfDot11PhyTxPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Group of attributes for bsnAPIfDot11PhyTxPowerTable.
|
|
Implemented as a table indexed on STA ID to allow for
|
|
multiple instances on an Agent. This table has been
|
|
deprecated. The level and power can be obtained from
|
|
bsnAPIfTable(bsnAPIfAbsolutePowerList)."
|
|
::= { bsnAP 8 }
|
|
|
|
bsnAPIfDot11PhyTxPowerEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfDot11PhyTxPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry in the bsnAPIfDot11PhyTxPower Table.
|
|
Interface tables in this MIB module are indexed
|
|
by bsnAPDot3MacAddress, bsnAPIfSlotId."
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfDot11PhyTxPowerTable 1 }
|
|
|
|
BsnAPIfDot11PhyTxPowerEntry ::= SEQUENCE {
|
|
bsnAPIfDot11NumberSupportedPowerLevels INTEGER,
|
|
bsnAPIfDot11TxPowerLevel1 INTEGER,
|
|
bsnAPIfDot11TxPowerLevel2 INTEGER,
|
|
bsnAPIfDot11TxPowerLevel3 INTEGER,
|
|
bsnAPIfDot11TxPowerLevel4 INTEGER,
|
|
bsnAPIfDot11TxPowerLevel5 INTEGER,
|
|
bsnAPIfDot11TxPowerLevel6 INTEGER,
|
|
bsnAPIfDot11TxPowerLevel7 INTEGER,
|
|
bsnAPIfDot11TxPowerLevel8 INTEGER
|
|
}
|
|
|
|
bsnAPIfDot11NumberSupportedPowerLevels OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of power levels supported by the PMD.
|
|
This attribute can have a value of 1 to 8."
|
|
::= { bsnAPIfDot11PhyTxPowerEntry 1 }
|
|
|
|
bsnAPIfDot11TxPowerLevel1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL1 in mW.
|
|
This is also the default power level. It is same as the
|
|
Maximum power level available on an AP interface."
|
|
::= { bsnAPIfDot11PhyTxPowerEntry 2 }
|
|
|
|
bsnAPIfDot11TxPowerLevel2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL2 in mW. It is 1/2 of
|
|
the Maximum power level available on an AP interface."
|
|
::= { bsnAPIfDot11PhyTxPowerEntry 3 }
|
|
|
|
bsnAPIfDot11TxPowerLevel3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL3 in mW. It is 1/4th
|
|
of the Maximum power level available on an AP interface."
|
|
::= { bsnAPIfDot11PhyTxPowerEntry 4 }
|
|
|
|
bsnAPIfDot11TxPowerLevel4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL4 in mW. It is 1/8th of
|
|
the Maximum power level available on an AP interface."
|
|
::= { bsnAPIfDot11PhyTxPowerEntry 5 }
|
|
|
|
bsnAPIfDot11TxPowerLevel5 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL5 in mW. It is 1/16th
|
|
of the Maximum power level available on an AP interface."
|
|
::= { bsnAPIfDot11PhyTxPowerEntry 6 }
|
|
|
|
bsnAPIfDot11TxPowerLevel6 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL6 in mW. It is 1/32th
|
|
of the Maximum power level available on an AP interface."
|
|
::= { bsnAPIfDot11PhyTxPowerEntry 7 }
|
|
|
|
bsnAPIfDot11TxPowerLevel7 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL7 in mW. It is 1/64th
|
|
of the Maximum power level available on an AP interface."
|
|
::= { bsnAPIfDot11PhyTxPowerEntry 8 }
|
|
|
|
bsnAPIfDot11TxPowerLevel8 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The transmit output power for LEVEL8 in mW. It is 1/128th
|
|
of the Maximum power level available on an AP interface."
|
|
::= { bsnAPIfDot11PhyTxPowerEntry 28 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * End of bsnAPIfDot11PhyTxPowerTable
|
|
-- ********************************************************************
|
|
--
|
|
|
|
-- ********************************************************************
|
|
-- * bsnAPIfDot11PhyChannelTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfDot11PhyChannelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfDot11PhyChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of attributes for bsnAPIfDot11PhyChannelEntry.
|
|
Implemented as a table indexed on bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId allow for multiple instances on an Agent"
|
|
::= { bsnAP 9 }
|
|
|
|
bsnAPIfDot11PhyChannelEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfDot11PhyChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the bsnAPIfDot11PhyChannelEntry Table.
|
|
Interface tables in this MIB module are indexed
|
|
by bsnAPDot3MacAddress, bsnAPIfSlotId."
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfDot11PhyChannelTable 1 }
|
|
|
|
BsnAPIfDot11PhyChannelEntry ::= SEQUENCE {
|
|
bsnAPIfDot11CurrentCCAMode INTEGER,
|
|
bsnAPIfDot11EDThreshold Integer32,
|
|
bsnAPIfDot11TIThreshold Integer32
|
|
}
|
|
|
|
bsnAPIfDot11CurrentCCAMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
edonly(1),
|
|
csonly(2),
|
|
edandcs(4),
|
|
cswithtimer(8),
|
|
hrcsanded(16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current CCA method in operation.Valid values are:
|
|
energy detect only (edonly) = 01,
|
|
carrier sense only (csonly) = 02,
|
|
carrier sense and energy detect (edandcs)= 04
|
|
carrier sense with timer (cswithtimer)= 08
|
|
high rate carrier sense and energy detect
|
|
(hrcsanded)=16."
|
|
::= { bsnAPIfDot11PhyChannelEntry 1 }
|
|
|
|
bsnAPIfDot11EDThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current Energy Detect Threshold being used by the
|
|
Channel PHY."
|
|
::= { bsnAPIfDot11PhyChannelEntry 2 }
|
|
|
|
bsnAPIfDot11TIThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Threshold being used to detect a busy medium (frequency).
|
|
CCA shall report a busy medium upon detecting the RSSI above
|
|
this threshold."
|
|
::= { bsnAPIfDot11PhyChannelEntry 23 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * End of bsnAPIfDot11PhyDSSSTable
|
|
-- ********************************************************************
|
|
--
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfProfileThresholdConfigTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfProfileThresholdConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfProfileThresholdConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of attributes for various thresholds to be
|
|
set on each Airespace AP Interface for Load
|
|
performance profile , interference performance
|
|
profile and Noise performance profile."
|
|
::= { bsnAP 12 }
|
|
|
|
bsnAPIfProfileThresholdConfigEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfProfileThresholdConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Phy Thresholds
|
|
Table. Entries in this MIB are indexed by
|
|
bsnAPDot3MacAddress and bsnAPIfSlotId"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfProfileThresholdConfigTable 1 }
|
|
|
|
BsnAPIfProfileThresholdConfigEntry ::= SEQUENCE {
|
|
bsnAPIfProfileParamAssignment INTEGER,
|
|
bsnAPIfForeignInterferenceThreshold INTEGER,
|
|
bsnAPIfForeignNoiseThreshold INTEGER,
|
|
bsnAPIfRFUtilizationThreshold INTEGER,
|
|
bsnAPIfThroughputThreshold Unsigned32,
|
|
bsnAPIfMobilesThreshold INTEGER,
|
|
bsnAPIfCoverageThreshold INTEGER,
|
|
bsnAPIfMobileMinExceptionLevel INTEGER,
|
|
bsnAPIfCoverageExceptionLevel INTEGER
|
|
}
|
|
|
|
bsnAPIfProfileParamAssignment OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
customized(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this value is automatic then Profile Parameters in
|
|
bsnRrmDot11aAPProfile at the global level will be used.
|
|
If this value is customized then Profile Parameters in
|
|
bsnAPIfProfileThresholdConfig
|
|
Table will be used and user can customize them per AP."
|
|
::= { bsnAPIfProfileThresholdConfigEntry 1 }
|
|
|
|
bsnAPIfForeignInterferenceThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"foreign interference threshold between 0 and 100 percent."
|
|
::= { bsnAPIfProfileThresholdConfigEntry 2 }
|
|
|
|
bsnAPIfForeignNoiseThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-127..0)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"foreign noise threshold between -100 and -50 dBm."
|
|
::= { bsnAPIfProfileThresholdConfigEntry 3 }
|
|
|
|
bsnAPIfRFUtilizationThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF utlization threshold between 0 and 100 percent."
|
|
::= { bsnAPIfProfileThresholdConfigEntry 4 }
|
|
|
|
bsnAPIfThroughputThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1000..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Airespace AP data-rate threshold between 1000 and 100000"
|
|
::= { bsnAPIfProfileThresholdConfigEntry 5 }
|
|
|
|
bsnAPIfMobilesThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (1..75)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Airespace AP mobiles threshold between 1 and 75"
|
|
::= { bsnAPIfProfileThresholdConfigEntry 6 }
|
|
|
|
bsnAPIfCoverageThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (3..50)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Airespace AP coverage threshold between 3 and 50"
|
|
::= { bsnAPIfProfileThresholdConfigEntry 7 }
|
|
|
|
bsnAPIfMobileMinExceptionLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..75)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Airespace AP mobile minimum exception level between 1 and 1000"
|
|
::= { bsnAPIfProfileThresholdConfigEntry 8 }
|
|
|
|
bsnAPIfCoverageExceptionLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Airespace AP coverage exception level between 0 and 100 percent."
|
|
::= { bsnAPIfProfileThresholdConfigEntry 28 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * End of bsnAPIfProfileThresholdConfigTable
|
|
-- ********************************************************************
|
|
--
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfLoadParametersTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfLoadParametersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfLoadParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These are RRM performance related read only parameters
|
|
per Airespace AP"
|
|
::= { bsnAP 13 }
|
|
|
|
bsnAPIfLoadParametersEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfLoadParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by
|
|
bsnAPDot3MacAddress and bsnAPIfSlotId"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfLoadParametersTable 1 }
|
|
|
|
BsnAPIfLoadParametersEntry ::= SEQUENCE {
|
|
bsnAPIfLoadRxUtilization INTEGER,
|
|
bsnAPIfLoadTxUtilization INTEGER,
|
|
bsnAPIfLoadChannelUtilization INTEGER,
|
|
bsnAPIfLoadNumOfClients Integer32,
|
|
bsnAPIfPoorSNRClients Integer32
|
|
}
|
|
|
|
bsnAPIfLoadRxUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the percentage of time the Airespace AP
|
|
receiver is busy operating on packets. It is a number
|
|
from 0-100 representing a load from 0 to 1."
|
|
::= { bsnAPIfLoadParametersEntry 1 }
|
|
|
|
bsnAPIfLoadTxUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the percentage of time the Airespace AP
|
|
transmitter is busy operating on packets. It is a
|
|
number from 0-100 representing a load from 0 to 1."
|
|
::= { bsnAPIfLoadParametersEntry 2 }
|
|
|
|
bsnAPIfLoadChannelUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel Utilization"
|
|
::= { bsnAPIfLoadParametersEntry 3 }
|
|
|
|
bsnAPIfLoadNumOfClients OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of clients attached to this Airespace
|
|
AP at the last measurement interval(This comes from
|
|
APF)"
|
|
::= { bsnAPIfLoadParametersEntry 4 }
|
|
|
|
bsnAPIfPoorSNRClients OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of clients with poor SNR attached to
|
|
this Airespace AP at the last measurement interval
|
|
( This comes from APF )."
|
|
::= { bsnAPIfLoadParametersEntry 24 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * End of bsnAPIfLoadParametersTable
|
|
-- ********************************************************************
|
|
--
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfChannelInterferenceInfoTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfChannelInterferenceInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfChannelInterferenceInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of channel information like interference
|
|
and noise from other 802.11 networks on each channel."
|
|
::= { bsnAP 14 }
|
|
|
|
bsnAPIfChannelInterferenceInfoEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfChannelInterferenceInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by
|
|
bsnAPDot3MacAddress, bsnAPIfSlotId"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfInterferenceChannelNo
|
|
}
|
|
::= { bsnAPIfChannelInterferenceInfoTable 1 }
|
|
|
|
BsnAPIfChannelInterferenceInfoEntry ::= SEQUENCE {
|
|
bsnAPIfInterferenceChannelNo Integer32,
|
|
bsnAPIfInterferencePower Integer32,
|
|
bsnAPIfInterferenceUtilization INTEGER
|
|
}
|
|
|
|
bsnAPIfInterferenceChannelNo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel Number on AP"
|
|
::= { bsnAPIfChannelInterferenceInfoEntry 1 }
|
|
|
|
bsnAPIfInterferencePower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power of Interference from other 802.11 networks on
|
|
this channel"
|
|
::= { bsnAPIfChannelInterferenceInfoEntry 2 }
|
|
|
|
bsnAPIfInterferenceUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interference from other 802.11 networks on this
|
|
channel"
|
|
::= { bsnAPIfChannelInterferenceInfoEntry 22 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfRadarChannelStatisticsTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfRadarChannelStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfRadarChannelStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of channel information on which radar
|
|
signal were detected. This will give the list of
|
|
channels and last heard timestamp. Radar signals are
|
|
detected only on 5Ghz range.
|
|
So this will be detected for 802.11a interface."
|
|
::= { bsnAP 24 }
|
|
|
|
bsnAPIfRadarChannelStatisticsEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfRadarChannelStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId, bsnAPIfRadarDetectedCannelNumber."
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfRadarDetectedChannelNumber
|
|
}
|
|
::= { bsnAPIfRadarChannelStatisticsTable 1 }
|
|
|
|
BsnAPIfRadarChannelStatisticsEntry ::= SEQUENCE {
|
|
bsnAPIfRadarDetectedChannelNumber Integer32,
|
|
bsnAPIfRadarSignalLastHeard Integer32
|
|
}
|
|
|
|
bsnAPIfRadarDetectedChannelNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel Number on which radar signals were detected."
|
|
::= { bsnAPIfRadarChannelStatisticsEntry 1 }
|
|
|
|
bsnAPIfRadarSignalLastHeard OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This tells how many seconds ago radar signal was heard
|
|
on the channel."
|
|
::= { bsnAPIfRadarChannelStatisticsEntry 2 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * End of bsnAPIfRadarChannelInterferenceInfoTable
|
|
-- ********************************************************************
|
|
--
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfChannelNoiseInfoTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfChannelNoiseInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfChannelNoiseInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of channel information like
|
|
interference and noise from other 802.11 networks on
|
|
each channel."
|
|
::= { bsnAP 15 }
|
|
|
|
bsnAPIfChannelNoiseInfoEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfChannelNoiseInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfNoiseChannelNo
|
|
}
|
|
::= { bsnAPIfChannelNoiseInfoTable 1 }
|
|
|
|
BsnAPIfChannelNoiseInfoEntry ::= SEQUENCE {
|
|
bsnAPIfNoiseChannelNo Integer32,
|
|
bsnAPIfDBNoisePower Integer32
|
|
}
|
|
|
|
bsnAPIfNoiseChannelNo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel Number on AP"
|
|
::= { bsnAPIfChannelNoiseInfoEntry 1 }
|
|
|
|
bsnAPIfDBNoisePower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the average noise power in dBm on
|
|
each channel that is available to Airespace AP"
|
|
::= { bsnAPIfChannelNoiseInfoEntry 21 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfProfileStateTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfProfileStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfProfileStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of state of interference monitor
|
|
on each Airespace AP"
|
|
::= { bsnAP 16 }
|
|
|
|
bsnAPIfProfileStateEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfProfileStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfProfileStateTable 1 }
|
|
|
|
BsnAPIfProfileStateEntry ::= SEQUENCE {
|
|
bsnAPIfLoadProfileState ProfileState,
|
|
bsnAPIfInterferenceProfileState ProfileState,
|
|
bsnAPIfNoiseProfileState ProfileState,
|
|
bsnAPIfCoverageProfileState ProfileState
|
|
}
|
|
|
|
bsnAPIfLoadProfileState OBJECT-TYPE
|
|
SYNTAX ProfileState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field represents the current state of the LOAD
|
|
monitor. This is a total measurement of the business of
|
|
this Airespace AP. PASS indicates that this Airespace
|
|
AP is performing adequately compared to the Airespace
|
|
AP profile. FAIL indicates the Airespace AP is not
|
|
performing adequately against the LOAD profile."
|
|
::= { bsnAPIfProfileStateEntry 1 }
|
|
|
|
bsnAPIfInterferenceProfileState OBJECT-TYPE
|
|
SYNTAX ProfileState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field represents the current state of Interference
|
|
monitor. This is a total measurement of the interference
|
|
present at this Airespace AP. PASS indicates that this
|
|
Airespace AP is performing adequately compared to the
|
|
Interference profile. FAIL indicates the Airespace AP
|
|
is not performing adequately against the Interference
|
|
profile."
|
|
::= { bsnAPIfProfileStateEntry 2 }
|
|
|
|
bsnAPIfNoiseProfileState OBJECT-TYPE
|
|
SYNTAX ProfileState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field represents the current state of Noise
|
|
monitor. This is a total measurement of the noise
|
|
present at this Airespace AP. PASS indicates that this
|
|
Airespace AP is performing adequately compared to the
|
|
noise profile.
|
|
FAIL indicates the Airespace AP is not performing
|
|
adequately against the noise profile."
|
|
::= { bsnAPIfProfileStateEntry 3 }
|
|
|
|
bsnAPIfCoverageProfileState OBJECT-TYPE
|
|
SYNTAX ProfileState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field represents the current state of coverage
|
|
monitor. This is a total measurement of the client
|
|
coverage at this Airespace AP. PASS indicates that
|
|
this Airespace AP is performing adequately compared
|
|
to the coverage profile. FAIL indicates the Airespace
|
|
AP is not performing adequately against the coverage
|
|
profile."
|
|
::= { bsnAPIfProfileStateEntry 24 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfRxNeighborsTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfRxNeighborsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfRxNeighborsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of Rx Neighbors for each Airespace AP
|
|
with their RSSI value."
|
|
::= { bsnAP 17 }
|
|
|
|
bsnAPIfRxNeighborsEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfRxNeighborsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by bsnAPDot3MacAddress
|
|
bsnAPIfSlotId, bsnAPIfRxNeighborMacAddress"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfRxNeighborMacAddress
|
|
}
|
|
::= { bsnAPIfRxNeighborsTable 1 }
|
|
|
|
BsnAPIfRxNeighborsEntry ::= SEQUENCE {
|
|
bsnAPIfRxNeighborMacAddress MacAddress,
|
|
bsnAPIfRxNeighborIpAddress IpAddress,
|
|
bsnAPIfRxNeighborRSSI Integer32,
|
|
bsnAPIfRxNeighborSlot Integer32,
|
|
bsnAPIfRxNeighborChannel Integer32,
|
|
bsnAPIfRxNeighborChannelWidth INTEGER
|
|
}
|
|
|
|
bsnAPIfRxNeighborMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of Rx Neighbor of the Airespace AP"
|
|
::= { bsnAPIfRxNeighborsEntry 1 }
|
|
|
|
bsnAPIfRxNeighborIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of Rx Neighbor of the Airespace AP"
|
|
::= { bsnAPIfRxNeighborsEntry 2 }
|
|
|
|
bsnAPIfRxNeighborRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSSI value of the Rx Neighbor"
|
|
::= { bsnAPIfRxNeighborsEntry 3 }
|
|
|
|
bsnAPIfRxNeighborSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slot value of the Rx Neighbor"
|
|
::= { bsnAPIfRxNeighborsEntry 24 }
|
|
|
|
bsnAPIfRxNeighborChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Channel information which
|
|
neighboring Access point is using."
|
|
::= { bsnAPIfRxNeighborsEntry 26 }
|
|
|
|
bsnAPIfRxNeighborChannelWidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
five(1),
|
|
ten(2),
|
|
twenty(3),
|
|
aboveforty(4),
|
|
belowforty(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Channel bandwidth information
|
|
which neighboring Access point is using."
|
|
::= { bsnAPIfRxNeighborsEntry 27 }
|
|
|
|
|
|
-- *****************************************************************
|
|
--
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnMeshNodeTable
|
|
-- ********************************************************************
|
|
|
|
bsnMeshNodeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMeshNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of mesh nodes."
|
|
::= { bsnAP 22 }
|
|
|
|
bsnMeshNodeEntry OBJECT-TYPE
|
|
SYNTAX BsnMeshNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by bsnAPDot3MacAddress"
|
|
INDEX { bsnAPDot3MacAddress }
|
|
::= { bsnMeshNodeTable 1 }
|
|
|
|
BsnMeshNodeEntry ::= SEQUENCE {
|
|
bsnMeshNodeRole INTEGER,
|
|
bsnMeshNodeGroup OCTET STRING,
|
|
bsnMeshNodeBackhaul INTEGER,
|
|
bsnMeshNodeBackhaulPAP INTEGER,
|
|
bsnMeshNodeBackhaulRAP INTEGER,
|
|
bsnMeshNodeDataRate Integer32,
|
|
bsnMeshNodeChannel Integer32,
|
|
bsnMeshNodeRoutingState INTEGER,
|
|
bsnMeshNodeMalformedNeighPackets Counter32,
|
|
bsnMeshNodePoorNeighSnr Counter32,
|
|
bsnMeshNodeBlacklistPackets Counter32,
|
|
bsnMeshNodeInsufficientMemory Counter32,
|
|
bsnMeshNodeRxNeighReq Counter32,
|
|
bsnMeshNodeRxNeighRsp Counter32,
|
|
bsnMeshNodeTxNeighReq Counter32,
|
|
bsnMeshNodeTxNeighRsp Counter32,
|
|
bsnMeshNodeParentChanges Counter32,
|
|
bsnMeshNodeNeighTimeout Counter32,
|
|
bsnMeshNodeParentMacAddress MacAddress,
|
|
bsnMeshNodeAPType INTEGER,
|
|
bsnMeshNodeEthernetBridge INTEGER,
|
|
bsnMeshNodeHops Integer32
|
|
}
|
|
|
|
bsnMeshNodeRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pap(0),
|
|
rap(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the role of this AP"
|
|
::= { bsnMeshNodeEntry 1 }
|
|
|
|
bsnMeshNodeGroup OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the bridge group name of this AP"
|
|
::= { bsnMeshNodeEntry 2 }
|
|
|
|
bsnMeshNodeBackhaul OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11a(0),
|
|
dot11b(1),
|
|
dot11g(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the backhaul radio device for this AP"
|
|
::= { bsnMeshNodeEntry 3 }
|
|
|
|
bsnMeshNodeBackhaulPAP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(0),
|
|
dot11a(1),
|
|
dot11b(2),
|
|
dot11g(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the backhaul"
|
|
::= { bsnMeshNodeEntry 4 }
|
|
|
|
bsnMeshNodeBackhaulRAP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11a(0),
|
|
dot11b(1),
|
|
dot11g(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the backhaul radio device for this AP"
|
|
::= { bsnMeshNodeEntry 5 }
|
|
|
|
bsnMeshNodeDataRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"this nodes backhaul data rate"
|
|
::= { bsnMeshNodeEntry 6 }
|
|
|
|
bsnMeshNodeChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"this nodes backhaul channel"
|
|
::= { bsnMeshNodeEntry 7 }
|
|
|
|
bsnMeshNodeRoutingState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
start(1),
|
|
seek(2),
|
|
sync(3),
|
|
auth(4),
|
|
maint(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"routing state"
|
|
::= { bsnMeshNodeEntry 8 }
|
|
|
|
bsnMeshNodeMalformedNeighPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the number of malformed neighbor packets."
|
|
::= { bsnMeshNodeEntry 9 }
|
|
|
|
bsnMeshNodePoorNeighSnr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"poor neighbor snr"
|
|
::= { bsnMeshNodeEntry 10 }
|
|
|
|
bsnMeshNodeBlacklistPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the number of blacklist packets received"
|
|
::= { bsnMeshNodeEntry 11 }
|
|
|
|
bsnMeshNodeInsufficientMemory OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"occurences of insufficient memory conditions"
|
|
::= { bsnMeshNodeEntry 12 }
|
|
|
|
bsnMeshNodeRxNeighReq OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx neighbor requests"
|
|
::= { bsnMeshNodeEntry 13 }
|
|
|
|
bsnMeshNodeRxNeighRsp OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx neighbor responses"
|
|
::= { bsnMeshNodeEntry 14 }
|
|
|
|
bsnMeshNodeTxNeighReq OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx neighbor requests"
|
|
::= { bsnMeshNodeEntry 15 }
|
|
|
|
bsnMeshNodeTxNeighRsp OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx neighbor responses"
|
|
::= { bsnMeshNodeEntry 16 }
|
|
|
|
bsnMeshNodeParentChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"number of parent changes"
|
|
::= { bsnMeshNodeEntry 17 }
|
|
|
|
bsnMeshNodeNeighTimeout OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"number of neighbor timeouts"
|
|
::= { bsnMeshNodeEntry 18 }
|
|
|
|
bsnMeshNodeParentMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"parents mac addressed"
|
|
::= { bsnMeshNodeEntry 19 }
|
|
|
|
bsnMeshNodeAPType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
indoorBridge(5),
|
|
outdoorBridge(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the type of AP"
|
|
::= { bsnMeshNodeEntry 20 }
|
|
|
|
bsnMeshNodeEthernetBridge OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"enable : Enables ethernet bridging on the AP.
|
|
disable : Disables ethernet bridging on the AP.
|
|
Changes are only applicable when AP is in 'Bridge'
|
|
mode."
|
|
::= { bsnMeshNodeEntry 21 }
|
|
|
|
bsnMeshNodeHops OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"number of hops to rap"
|
|
::= { bsnMeshNodeEntry 30 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnMeshNeighsTable
|
|
-- ********************************************************************
|
|
|
|
bsnMeshNeighsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMeshNeighsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of mesh neighbors."
|
|
::= { bsnAP 23 }
|
|
|
|
bsnMeshNeighsEntry OBJECT-TYPE
|
|
SYNTAX BsnMeshNeighsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by bsnAPDot3MacAddress
|
|
and bsnMeshNeighNeighMacAddress"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnMeshNeighMacAddress
|
|
}
|
|
::= { bsnMeshNeighsTable 1 }
|
|
|
|
BsnMeshNeighsEntry ::= SEQUENCE {
|
|
bsnMeshNeighMacAddress MacAddress,
|
|
bsnMeshNeighType INTEGER,
|
|
bsnMeshNeighState INTEGER,
|
|
bsnMeshNeighSnr Integer32,
|
|
bsnMeshNeighSnrUp Integer32,
|
|
bsnMeshNeighSnrDown Integer32,
|
|
bsnMeshNeighLinkSnr Integer32,
|
|
bsnMeshNeighAdjustedEase Integer32,
|
|
bsnMeshNeighUnadjustedEase Integer32,
|
|
bsnMeshNeighRapEase Integer32,
|
|
bsnMeshNeighTxParent Counter32,
|
|
bsnMeshNeighRxParent Counter32,
|
|
bsnMeshNeighPoorSnr Counter32,
|
|
bsnMeshNeighLastUpdate Integer32,
|
|
bsnMeshNeighParentChange Integer32
|
|
}
|
|
|
|
bsnMeshNeighMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of neighbor"
|
|
::= { bsnMeshNeighsEntry 1 }
|
|
|
|
bsnMeshNeighType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
parent(0),
|
|
tentparent(1),
|
|
neigh(2),
|
|
blacklisted(3),
|
|
child(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"neighbor type"
|
|
::= { bsnMeshNeighsEntry 2 }
|
|
|
|
bsnMeshNeighState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
updated(0),
|
|
needupdate(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"neighbor state"
|
|
::= { bsnMeshNeighsEntry 3 }
|
|
|
|
bsnMeshNeighSnr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"explicitly set SNR"
|
|
::= { bsnMeshNeighsEntry 4 }
|
|
|
|
bsnMeshNeighSnrUp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"snr up"
|
|
::= { bsnMeshNeighsEntry 5 }
|
|
|
|
bsnMeshNeighSnrDown OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"snr down"
|
|
::= { bsnMeshNeighsEntry 6 }
|
|
|
|
bsnMeshNeighLinkSnr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"link snr"
|
|
::= { bsnMeshNeighsEntry 7 }
|
|
|
|
bsnMeshNeighAdjustedEase OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"hops adjusted ease"
|
|
::= { bsnMeshNeighsEntry 8 }
|
|
|
|
bsnMeshNeighUnadjustedEase OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ease to root AP from this AP"
|
|
::= { bsnMeshNeighsEntry 9 }
|
|
|
|
bsnMeshNeighRapEase OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"unadjusted ease received in last hello"
|
|
::= { bsnMeshNeighsEntry 10 }
|
|
|
|
bsnMeshNeighTxParent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tx packets to this node while a parent"
|
|
::= { bsnMeshNeighsEntry 11 }
|
|
|
|
bsnMeshNeighRxParent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"rx packets from this node while a parent"
|
|
::= { bsnMeshNeighsEntry 12 }
|
|
|
|
bsnMeshNeighPoorSnr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"packets with poor snr received from this node"
|
|
::= { bsnMeshNeighsEntry 13 }
|
|
|
|
bsnMeshNeighLastUpdate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"last received hello from this neighbor"
|
|
::= { bsnMeshNeighsEntry 14 }
|
|
|
|
bsnMeshNeighParentChange OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"when this node last became parent"
|
|
::= { bsnMeshNeighsEntry 20 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfStationRSSICoverageInfoTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfStationRSSICoverageInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfStationRSSICoverageInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of channel information like interference
|
|
and noise from other 802.11 networks on each channel."
|
|
::= { bsnAP 18 }
|
|
|
|
bsnAPIfStationRSSICoverageInfoEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfStationRSSICoverageInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfStationRSSICoverageIndex
|
|
}
|
|
::= { bsnAPIfStationRSSICoverageInfoTable 1 }
|
|
|
|
BsnAPIfStationRSSICoverageInfoEntry ::= SEQUENCE {
|
|
bsnAPIfStationRSSICoverageIndex Integer32,
|
|
bsnAPIfRSSILevel Integer32,
|
|
bsnAPIfStationCountOnRSSI Integer32
|
|
}
|
|
|
|
bsnAPIfStationRSSICoverageIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSSI Coverage Index on AP"
|
|
::= { bsnAPIfStationRSSICoverageInfoEntry 1 }
|
|
|
|
bsnAPIfRSSILevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSSI Level"
|
|
::= { bsnAPIfStationRSSICoverageInfoEntry 2 }
|
|
|
|
bsnAPIfStationCountOnRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of stations on this RSSI Level"
|
|
::= { bsnAPIfStationRSSICoverageInfoEntry 23 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfStationSNRCoverageInfoTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfStationSNRCoverageInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfStationSNRCoverageInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of Signal to Noise ratio Coverage
|
|
information on an AP Interface."
|
|
::= { bsnAP 19 }
|
|
|
|
bsnAPIfStationSNRCoverageInfoEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfStationSNRCoverageInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfStationSNRCoverageIndex
|
|
}
|
|
::= { bsnAPIfStationSNRCoverageInfoTable 1 }
|
|
|
|
BsnAPIfStationSNRCoverageInfoEntry ::= SEQUENCE {
|
|
bsnAPIfStationSNRCoverageIndex Integer32,
|
|
bsnAPIfSNRLevel Integer32,
|
|
bsnAPIfStationCountOnSNR Integer32
|
|
}
|
|
|
|
bsnAPIfStationSNRCoverageIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNR Coverage Index on AP"
|
|
::= { bsnAPIfStationSNRCoverageInfoEntry 1 }
|
|
|
|
bsnAPIfSNRLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNR Level"
|
|
::= { bsnAPIfStationSNRCoverageInfoEntry 2 }
|
|
|
|
bsnAPIfStationCountOnSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of stations on this SNR Level"
|
|
::= { bsnAPIfStationSNRCoverageInfoEntry 23 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPIfRecommendedRFParametersTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPIfRecommendedRFParametersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPIfRecommendedRFParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table list Best Channel,Best TxPowerLevel,
|
|
Best RTSThreshold,Best FragmentationThreshold etc
|
|
for this AP Interface as determined by RRM."
|
|
::= { bsnAP 20 }
|
|
|
|
bsnAPIfRecommendedRFParametersEntry OBJECT-TYPE
|
|
SYNTAX BsnAPIfRecommendedRFParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the Table.
|
|
Entries in this MIB are indexed by bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId"
|
|
INDEX {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId
|
|
}
|
|
::= { bsnAPIfRecommendedRFParametersTable 1 }
|
|
|
|
BsnAPIfRecommendedRFParametersEntry ::= SEQUENCE {
|
|
bsnAPIfRecommendedChannelNumber Integer32,
|
|
bsnAPIfRecommendedTxPowerLevel Integer32,
|
|
bsnAPIfRecommendedRTSThreshold Integer32,
|
|
bsnAPIfRecommendedFragmentationThreshold Integer32
|
|
}
|
|
|
|
bsnAPIfRecommendedChannelNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Recommended ChannelNumber by RRM for this APIf"
|
|
::= { bsnAPIfRecommendedRFParametersEntry 1 }
|
|
|
|
bsnAPIfRecommendedTxPowerLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Recommended TxPowerLevel by RRM for this APIf"
|
|
::= { bsnAPIfRecommendedRFParametersEntry 2 }
|
|
|
|
bsnAPIfRecommendedRTSThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Recommended RTSThreshold by RRM for this APIf"
|
|
::= { bsnAPIfRecommendedRFParametersEntry 3 }
|
|
|
|
bsnAPIfRecommendedFragmentationThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Recommended Fragmentation Threshold by RRM for this
|
|
APIf"
|
|
::= { bsnAPIfRecommendedRFParametersEntry 24 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Global Dot11 Parameters
|
|
-- * Global Dot11 Parameters apply to all Wlan(ESS)
|
|
-- * These parameters are as defined in IEEE 802.11 Standard MIB
|
|
-- *******************************************************************
|
|
|
|
bsnGlobalDot11Config OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11 1 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * BSN Dot11 Global Universal Parameters that apply to both a and b
|
|
-- ********************************************************************
|
|
|
|
bsnGlobalDot11PrivacyOptionImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notimplemented(0),
|
|
implemented(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when true, shall indicate that the IEEE
|
|
802.11 WEP option is implemented. The default value of
|
|
this attribute shall be false."
|
|
::= { bsnGlobalDot11Config 1 }
|
|
|
|
bsnGlobalDot11AuthenticationResponseTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (5..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of TU that a
|
|
responding STA should wait for the next frame in the
|
|
authentication sequence."
|
|
::= { bsnGlobalDot11Config 2 }
|
|
|
|
bsnGlobalDot11MultiDomainCapabilityImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the
|
|
station implementation is capable of supporting
|
|
multiple regulatory domains. The capability is
|
|
disabled, otherwise. The default value of this
|
|
attribute is FALSE."
|
|
::= { bsnGlobalDot11Config 3 }
|
|
|
|
bsnGlobalDot11MultiDomainCapabilityEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the
|
|
capability of the station to operate in multiple
|
|
regulatory domains is enabled. The capability is
|
|
disabled, otherwise. The default value of this
|
|
attribute is FALSE."
|
|
::= { bsnGlobalDot11Config 4 }
|
|
|
|
bsnGlobalDot11CountryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
usa(1),
|
|
canada(2),
|
|
france(3),
|
|
japan(4),
|
|
mexico(5),
|
|
spain(6),
|
|
usalegacy(7),
|
|
korearepublic(8),
|
|
australia(9),
|
|
austria(10),
|
|
belgium(11),
|
|
denmark(12),
|
|
finland(13),
|
|
germany(14),
|
|
greece(15),
|
|
ireland(16),
|
|
italy(17),
|
|
luxembourg(18),
|
|
netherlands(19),
|
|
portugal(20),
|
|
sweden(21),
|
|
unitedkingdom(22),
|
|
none(23),
|
|
india(24),
|
|
hongkong(25),
|
|
switzerland(26),
|
|
iceland(27),
|
|
norway(28),
|
|
singapore(29),
|
|
thailand(30),
|
|
taiwan(31),
|
|
cyprus(33),
|
|
czechrepublic(34),
|
|
estonia(35),
|
|
hungary(36),
|
|
lithuania(37),
|
|
latvia(38),
|
|
malaysia(39),
|
|
newzealand(40),
|
|
poland(41),
|
|
slovenia(42),
|
|
slovakrepublic(43),
|
|
southafrica(44),
|
|
usachan165(45),
|
|
israel(46),
|
|
israelOutdoor(47),
|
|
argentina(48),
|
|
brazil(49),
|
|
saudiArabia(51),
|
|
turkey(52),
|
|
indonesia(53),
|
|
china(54),
|
|
koreaExtended(55),
|
|
japan2(56),
|
|
gibraltar(57),
|
|
liechtenstein(58),
|
|
malta(59),
|
|
monaco(60),
|
|
romania(61),
|
|
russianfederation(62),
|
|
chile(63),
|
|
colombia(64),
|
|
panama(65),
|
|
peru(66),
|
|
venezuela(67),
|
|
philippines(68)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute identifies the country in which the
|
|
station is operating."
|
|
::= { bsnGlobalDot11Config 5 }
|
|
|
|
bsnGlobalDot11LoadBalancing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute specifies if load balancing of clients is
|
|
enabled on disabled.
|
|
|
|
Global configuration of Load Balancing is now removed.
|
|
Use cLWlanLoadBalancingEnable to configure it per WLAN."
|
|
::= { bsnGlobalDot11Config 6 }
|
|
|
|
bsnGlobalDot11RogueTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (120..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies in seconds, the time interval after
|
|
which a Rogue Entry in Rogue Table will expire if no beacon
|
|
is heard from a Rogue."
|
|
::= { bsnGlobalDot11Config 7 }
|
|
|
|
bsnPrimaryMwarForAPs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies if this Switch acts a Master Switch
|
|
for the Airespace APs.
|
|
So if an Airespace AP doesn't find its Primary Switch, it will
|
|
associate with this Switch."
|
|
::= { bsnGlobalDot11Config 8 }
|
|
|
|
bsnRtpProtocolPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nopriority(0),
|
|
highpriority(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Real Time Protocol Priority."
|
|
::= { bsnGlobalDot11Config 9 }
|
|
|
|
bsnSystemCurrentTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute will display the Current System time on the
|
|
Switch."
|
|
::= { bsnGlobalDot11Config 10 }
|
|
|
|
bsnUpdateSystemTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Use this attribute to change the System time on the Switch.
|
|
Specify the new time in this Format MM/DD/YYYY HH:MM:SS"
|
|
::= { bsnGlobalDot11Config 11 }
|
|
|
|
bsnOperatingTemperatureEnvironment OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
commercial(1),
|
|
industrial(2),
|
|
unknown(0)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operating Environment of the Airespace Switch.
|
|
commercial is Commercial (0 to 40 C) and
|
|
industrial is Industrial (-10 to 70 C)"
|
|
::= { bsnGlobalDot11Config 12 }
|
|
|
|
bsnSensorTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Internal Temperature of the unit in Centigrade"
|
|
::= { bsnGlobalDot11Config 13 }
|
|
|
|
bsnTemperatureAlarmLowLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internal Temperature Alarm Low Limit in Centigrade. If the
|
|
bsnSensorTemperature goes below this limit
|
|
bsnSensedTemperatureTooLow Alarm will be sent out"
|
|
::= { bsnGlobalDot11Config 14 }
|
|
|
|
bsnTemperatureAlarmHighLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internal Temperature Alarm High Limit in Centigrade. If the
|
|
bsnSensorTemperature goes above this limit
|
|
bsnSensedTemperatureTooHigh Alarm will be sent out"
|
|
::= { bsnGlobalDot11Config 15 }
|
|
|
|
bsnVirtualGatewayAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual Gateway Address of the Switch. This is used by web
|
|
auth and Ipsec. If the virtual IP Address is changed, the
|
|
Switch has to be rebooted for the new Address to take effect.
|
|
This is now replaced by the Virtual Interface in bsnswitching
|
|
MIB."
|
|
::= { bsnGlobalDot11Config 16 }
|
|
|
|
bsnRFMobilityDomainName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF Mobility Group Name to which this Airespace Switch belongs.
|
|
Airespace Switches on a network form a RF Group as well as a
|
|
Mobility Group. RF Groups does the channel and power
|
|
management of AP while Mobility Group does load balancing and
|
|
hand off for clients."
|
|
::= { bsnGlobalDot11Config 17 }
|
|
|
|
bsnClientWatchListFeature OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be turned on for the client watch lists
|
|
to be enabled on the switch. When enabled, the switch
|
|
generates Client Association and Authentication traps for
|
|
the watchlisted clients."
|
|
DEFVAL { disable }
|
|
::= { bsnGlobalDot11Config 18 }
|
|
|
|
bsnRogueLocationDiscoveryProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
allAPs(1),
|
|
monitorAPOnly(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be turned on to enable the Rogue
|
|
Location Discovery Protocol feature on the switch.
|
|
We can either enable this feature for all the APs
|
|
or only for APs in monitor mode."
|
|
DEFVAL { disable }
|
|
::= { bsnGlobalDot11Config 19 }
|
|
|
|
bsnRogueAutoContainFeature OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be turned on to allow the switch to
|
|
contain the rogues automatically if detected
|
|
on the wired network."
|
|
DEFVAL { disable }
|
|
::= { bsnGlobalDot11Config 20 }
|
|
|
|
bsnOverAirProvisionApMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Over the Air Provisioning Mode for APs"
|
|
::= { bsnGlobalDot11Config 21 }
|
|
|
|
bsnMaximumNumberOfConcurrentLogins OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum number of
|
|
concurrent logins that the switch will allow for a
|
|
single user. A value 0 implies that there is
|
|
no restriction on the number of concurrent logins
|
|
with a single username."
|
|
::= { bsnGlobalDot11Config 22 }
|
|
|
|
bsnAutoContainRoguesAdvertisingSsid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
alarmOnly(0),
|
|
contain(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be set to 1 to allow the switch to
|
|
contain automatically those rogues that are
|
|
advertising our SSID. If value is 0, only an alarm
|
|
will be generated when such a rogue is detected."
|
|
DEFVAL { alarmOnly }
|
|
::= { bsnGlobalDot11Config 23 }
|
|
|
|
bsnAutoContainAdhocNetworks OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
alarmOnly(0),
|
|
contain(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be set to 1 to allow the switch to
|
|
contain automatically the adhoc networks
|
|
detected by the switch. If value is 0, only an alarm
|
|
will be generated when such a network is detected."
|
|
DEFVAL { alarmOnly }
|
|
::= { bsnGlobalDot11Config 24 }
|
|
|
|
bsnAutoContainTrustedClientsOnRogueAps OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
alarmOnly(0),
|
|
contain(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be set to 1 to allow the switch to
|
|
contain automatically those trusted clients that
|
|
are associated to rogue APs. If value is 0, only an
|
|
alarm will be generated when such a client is
|
|
detected."
|
|
DEFVAL { alarmOnly }
|
|
::= { bsnGlobalDot11Config 25 }
|
|
|
|
bsnValidateRogueClientsAgainstAAA OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be turned on to allow the switch to
|
|
validate 'valid' mobiles associating with rogue APs.
|
|
For example, if a client's MAC Address is found in
|
|
the local MAC filter table, that client can be
|
|
validated."
|
|
DEFVAL { disable }
|
|
::= { bsnGlobalDot11Config 26 }
|
|
|
|
bsnSystemTimezoneDelta OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delta (difference) between the local time and the
|
|
Universal Coordinated Time in hours.
|
|
For example, it is -8 for the PST and +1 for France. If
|
|
the delta is -5.30 then this attribute will store -5 and
|
|
bsnSystemTimezoneDeltaMinutes will store 30. This value i
|
|
should be between -23 to +23"
|
|
::= { bsnGlobalDot11Config 27 }
|
|
|
|
bsnSystemTimezoneDeltaMinutes OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minutes component of delta (difference) between the
|
|
local time and the Universal Coordinated Time."
|
|
::= { bsnGlobalDot11Config 30 }
|
|
|
|
bsnSystemTimezoneDaylightSavings OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This flag specifies if daylight savings are enabled for
|
|
the current timezone."
|
|
::= { bsnGlobalDot11Config 28 }
|
|
|
|
bsnAllowAuthorizeApAgainstAAA OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag specifies if LWAPP is allowed to get
|
|
authorization via RADIUS or local database for an AP."
|
|
::= { bsnGlobalDot11Config 29 }
|
|
|
|
bsnApFallbackEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag specifies if the APs should continue LWAPP
|
|
discoveries to fallback to the primary switch
|
|
in case they are not already associated with it i.e they
|
|
are associated with their respective secondary or
|
|
tertiary switch instead."
|
|
::= { bsnGlobalDot11Config 31 }
|
|
|
|
bsnAppleTalkEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag turns on the appletalk bridging in the switch
|
|
such that the packets from Apple clients that use
|
|
appletalk format can be processed by the switch. When
|
|
this flag is off, these packets are dropped."
|
|
::= { bsnGlobalDot11Config 32 }
|
|
-- ********************************************************************
|
|
-- * Global Trusted AP policies
|
|
-- ********************************************************************
|
|
|
|
bsnTrustedApPolicyConfig OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11Config 40 }
|
|
|
|
|
|
bsnPolicyForMisconfiguredAps OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
alarmOnly(0),
|
|
contain(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be turned on to allow the switch to
|
|
contain misconfigured APs."
|
|
DEFVAL { alarmOnly }
|
|
::= { bsnTrustedApPolicyConfig 1 }
|
|
|
|
bsnEncryptionPolicyEnforced OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
open(1),
|
|
wep(2),
|
|
wpa(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The encryption policy that is enforced on the
|
|
trusted APs."
|
|
DEFVAL { none }
|
|
::= { bsnTrustedApPolicyConfig 2 }
|
|
|
|
bsnPreamblePolicyEnforced OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
short(1),
|
|
long(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preamble policy that is enforced on the trusted
|
|
APs."
|
|
DEFVAL { none }
|
|
::= { bsnTrustedApPolicyConfig 3 }
|
|
|
|
bsnDot11ModePolicyEnforced OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
dcfOnly(1),
|
|
pcfOnly(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.11 Mode policy that is enforced on the
|
|
trusted APs."
|
|
DEFVAL { none }
|
|
::= { bsnTrustedApPolicyConfig 4 }
|
|
|
|
bsnRadioTypePolicyEnforced OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
aOnly(1),
|
|
bOnly(2),
|
|
bgOnly(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The radio type policy that is enforced on the
|
|
trusted
|
|
APs."
|
|
DEFVAL { none }
|
|
::= { bsnTrustedApPolicyConfig 5 }
|
|
|
|
bsnValidateSsidForTrustedAp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled, the SSID of trusted APs will be
|
|
validated
|
|
by the switch."
|
|
DEFVAL { disable }
|
|
::= { bsnTrustedApPolicyConfig 6 }
|
|
|
|
bsnAlertIfTrustedApMissing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled, an alert will be generated when a
|
|
trusted AP is missing."
|
|
DEFVAL { disable }
|
|
::= { bsnTrustedApPolicyConfig 7 }
|
|
|
|
bsnTrustedApEntryExpirationTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (120..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies in seconds, the time interval after
|
|
which a Trusted AP Entry will expire if no beacon is heard
|
|
from that AP."
|
|
DEFVAL { 120 }
|
|
::= { bsnTrustedApPolicyConfig 8 }
|
|
-- *******************************************************************
|
|
-- * Global Trusted AP policies
|
|
-- *******************************************************************
|
|
|
|
bsnClientExclusionPolicyConfig OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11Config 41 }
|
|
|
|
|
|
bsnExcessive80211AssocFailures OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag specifies if client should be excluded
|
|
(blacklisted) if repeated 802.11 Association
|
|
Failures occurs with a client."
|
|
::= { bsnClientExclusionPolicyConfig 1 }
|
|
|
|
bsnExcessive80211AuthFailures OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag specifies if client should be excluded
|
|
(blacklisted) if repeated 802.11 Authentication
|
|
Failures occurs with a client."
|
|
::= { bsnClientExclusionPolicyConfig 2 }
|
|
|
|
bsnExcessive8021xAuthFailures OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag specifies if client should be excluded
|
|
(blacklisted) if repeated 802.1x Authentication
|
|
Failures occurs with a client."
|
|
::= { bsnClientExclusionPolicyConfig 3 }
|
|
|
|
bsnExternalPolicyServerFailures OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag specifies if client should be excluded
|
|
(blacklisted) if repeated external policy server
|
|
failures occurs with a client."
|
|
::= { bsnClientExclusionPolicyConfig 4 }
|
|
|
|
bsnExcessiveWebAuthFailures OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag specifies if client should be excluded
|
|
(blacklisted) if repeated Web Authentication Failures
|
|
occurs with a client."
|
|
::= { bsnClientExclusionPolicyConfig 5 }
|
|
|
|
bsnIPTheftORReuse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag specifies if client should be excluded
|
|
(blacklisted) if it appears to be reusing an IP
|
|
Address.(Possible IP Theft)"
|
|
::= { bsnClientExclusionPolicyConfig 6 }
|
|
-- *******************************************************************
|
|
-- * Standard and Custom Signature Lists. Signatures are pattern
|
|
-- * matching rules used to identify packets
|
|
-- * that may be a part of an attack.
|
|
-- ********************************************************************
|
|
|
|
bsnSignatureConfig OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11Config 42 }
|
|
|
|
|
|
bsnStandardSignatureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnStandardSignatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing Standard Signatures configured on the
|
|
switch. The standard signatures are provided with the
|
|
released product. The standard signatures can be updated
|
|
via file download to the switch. The table is indexed by
|
|
the precedence of the signatures."
|
|
::= { bsnSignatureConfig 1 }
|
|
|
|
bsnStandardSignatureEntry OBJECT-TYPE
|
|
SYNTAX BsnStandardSignatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX { bsnStandardSignaturePrecedence }
|
|
::= { bsnStandardSignatureTable 1 }
|
|
|
|
BsnStandardSignatureEntry ::= SEQUENCE {
|
|
bsnStandardSignaturePrecedence Unsigned32,
|
|
bsnStandardSignatureName DisplayString,
|
|
bsnStandardSignatureDescription DisplayString,
|
|
bsnStandardSignatureFrameType INTEGER,
|
|
bsnStandardSignatureAction INTEGER,
|
|
bsnStandardSignatureState INTEGER,
|
|
bsnStandardSignatureFrequency Unsigned32,
|
|
bsnStandardSignatureQuietTime Unsigned32,
|
|
bsnStandardSignatureVersion Unsigned32,
|
|
bsnStandardSignatureConfigType INTEGER,
|
|
bsnStandardSignatureEnable TruthValue,
|
|
bsnStandardSignatureMacInfo BsnTxtSignatureMacInfo,
|
|
bsnStandardSignatureMacFreq Unsigned32,
|
|
bsnStandardSignatureRowStatus RowStatus,
|
|
bsnStandardSignatureInterval Unsigned32
|
|
}
|
|
|
|
bsnStandardSignaturePrecedence OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Precedence of the signature. This specifies the order in
|
|
which the signature is applied to a packet."
|
|
::= { bsnStandardSignatureEntry 1 }
|
|
|
|
bsnStandardSignatureName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is used to configure the name on a
|
|
signature."
|
|
::= { bsnStandardSignatureEntry 2 }
|
|
|
|
bsnStandardSignatureDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is used to configure the description of a
|
|
signature."
|
|
::= { bsnStandardSignatureEntry 3 }
|
|
|
|
bsnStandardSignatureFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
management(0),
|
|
data(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the type of frame that needs to
|
|
match a signature."
|
|
::= { bsnStandardSignatureEntry 4 }
|
|
|
|
bsnStandardSignatureAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
report(1),
|
|
contain(2),
|
|
exclude(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the action to be taken once a
|
|
packet is found to match a signature."
|
|
::= { bsnStandardSignatureEntry 5 }
|
|
|
|
bsnStandardSignatureState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the state of a signature. It
|
|
is used to match packets only if the state is enabled."
|
|
::= { bsnStandardSignatureEntry 6 }
|
|
|
|
bsnStandardSignatureFrequency OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the frequency of the matching packets
|
|
after which the specified action is taken."
|
|
::= { bsnStandardSignatureEntry 7 }
|
|
|
|
bsnStandardSignatureQuietTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the quiet time in seconds during which no
|
|
matching packets are found after which the attack is
|
|
considered stopped."
|
|
::= { bsnStandardSignatureEntry 8 }
|
|
|
|
bsnStandardSignatureVersion OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the signature version."
|
|
::= { bsnStandardSignatureEntry 9 }
|
|
|
|
bsnStandardSignatureConfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pattern(0),
|
|
protocol(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the type of Signature
|
|
configuration. It's protocol when the protocol format is
|
|
used in the UI to configure this. Pattern is the config
|
|
type for all signatures in the released signature file
|
|
and when signatures are configured using pattern
|
|
format. Note: the signatures will be allowed to be i
|
|
configured in later releases."
|
|
::= { bsnStandardSignatureEntry 10 }
|
|
|
|
bsnStandardSignatureEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the status of a particular
|
|
standard signature on LWAPP APs, for use in performing
|
|
signature analysis on the received 802.11 data and/or
|
|
management frames.
|
|
|
|
A value of 'true' makes the Controller send the
|
|
'Signature Add LWAPP Message' to all the joined APs
|
|
with the status field set to 'enable'. This makes
|
|
the joined APs perform signature analysis on the
|
|
received 802.11 data and/or management frames and
|
|
report the discrepancies observed, if any, to the
|
|
Controller.
|
|
|
|
A value of 'false' makes the Controller send the
|
|
'Signature Add LWAPP Message' to all the joined APs
|
|
with the status field set to 'disable'. The joined
|
|
APs doesn't perform the signature analysis on the
|
|
received 802.11 data and/or management frames for
|
|
this particular signature, till the signature is
|
|
enabled."
|
|
DEFVAL { false }
|
|
::= { bsnStandardSignatureEntry 11 }
|
|
|
|
bsnStandardSignatureMacInfo OBJECT-TYPE
|
|
SYNTAX BsnTxtSignatureMacInfo
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the pattern followed by the
|
|
LWAPP APs to perform signature analysis with this
|
|
Standard signature and report the results to the
|
|
Controller."
|
|
::= { bsnStandardSignatureEntry 12 }
|
|
|
|
bsnStandardSignatureMacFreq OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the frequency of matching
|
|
packets from a particular source after which the
|
|
specified action is taken."
|
|
::= { bsnStandardSignatureEntry 13 }
|
|
|
|
bsnStandardSignatureRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for creation/deletion. Signature will allowed to
|
|
be created, deleted and edited in later releases."
|
|
::= { bsnStandardSignatureEntry 20 }
|
|
|
|
bsnStandardSignatureInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval of the signature. This specifies the interval
|
|
when the signature is applied to a packet."
|
|
::= { bsnStandardSignatureEntry 21 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Packet Matching Patterns of a Standard Signature
|
|
-- *******************************************************************
|
|
|
|
bsnStandardSignaturePatternTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnStandardSignaturePatternEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing the matching patterns specified for a i
|
|
Standard Signature. These are instrumental in
|
|
matching the signature with a packet. A maximum of 5 i
|
|
patterns may be specifed for a signature.
|
|
These are used for matching in the order of their index."
|
|
::= { bsnSignatureConfig 2 }
|
|
|
|
bsnStandardSignaturePatternEntry OBJECT-TYPE
|
|
SYNTAX BsnStandardSignaturePatternEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX {
|
|
bsnStandardSignaturePrecedence,
|
|
bsnStandardSignaturePatternIndex
|
|
}
|
|
::= { bsnStandardSignaturePatternTable 1 }
|
|
|
|
BsnStandardSignaturePatternEntry ::= SEQUENCE {
|
|
bsnStandardSignaturePatternIndex Unsigned32,
|
|
bsnStandardSignaturePatternOffset Unsigned32,
|
|
bsnStandardSignaturePatternString DisplayString,
|
|
bsnStandardSignaturePatternMask DisplayString,
|
|
bsnStandardSignaturePatternOffSetStart BsnSignaturePatternOffSetStart,
|
|
bsnStandardSignaturePatternRowStatus RowStatus
|
|
}
|
|
|
|
bsnStandardSignaturePatternIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..5)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the pattern. This specifies the order in which
|
|
the pattern is checked against the packet contents."
|
|
::= { bsnStandardSignaturePatternEntry 1 }
|
|
|
|
bsnStandardSignaturePatternOffset OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Offset from the start of the packet where the AP looks
|
|
for a match to the pattern."
|
|
::= { bsnStandardSignaturePatternEntry 2 }
|
|
|
|
bsnStandardSignaturePatternString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..62))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the pattern string that the AP uses to match at
|
|
the offset. Example: 0x616c7068615f3178"
|
|
::= { bsnStandardSignaturePatternEntry 3 }
|
|
|
|
bsnStandardSignaturePatternMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..62))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the pattern mask. This is the bit mask that the
|
|
AP uses to mask out the bits in the packet at the given
|
|
offset. Example: 0xffffffffffffffff"
|
|
::= { bsnStandardSignaturePatternEntry 4 }
|
|
|
|
bsnStandardSignaturePatternOffSetStart OBJECT-TYPE
|
|
SYNTAX BsnSignaturePatternOffSetStart
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates how an offset should be applied
|
|
while doing signature analysis for QOS and non-QOS
|
|
data frames with this standard signature."
|
|
::= { bsnStandardSignaturePatternEntry 5 }
|
|
|
|
bsnStandardSignaturePatternRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for creation/deletion. Signature Pattern will allowed
|
|
to be created, deleted and edited in later releases."
|
|
::= { bsnStandardSignaturePatternEntry 15 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Custom Signature List.
|
|
-- ********************************************************************
|
|
|
|
bsnCustomSignatureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnCustomSignatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing Standard Signatures configured on the
|
|
switch. The standard signatures are provided
|
|
with the released product. The standard signatures can be
|
|
updated via file download to the switch. The table
|
|
is indexed by the precedence of the signatures."
|
|
::= { bsnSignatureConfig 3 }
|
|
|
|
bsnCustomSignatureEntry OBJECT-TYPE
|
|
SYNTAX BsnCustomSignatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX { bsnCustomSignaturePrecedence }
|
|
::= { bsnCustomSignatureTable 1 }
|
|
|
|
BsnCustomSignatureEntry ::= SEQUENCE {
|
|
bsnCustomSignaturePrecedence Unsigned32,
|
|
bsnCustomSignatureName DisplayString,
|
|
bsnCustomSignatureDescription DisplayString,
|
|
bsnCustomSignatureFrameType INTEGER,
|
|
bsnCustomSignatureAction INTEGER,
|
|
bsnCustomSignatureState INTEGER,
|
|
bsnCustomSignatureFrequency Unsigned32,
|
|
bsnCustomSignatureQuietTime Unsigned32,
|
|
bsnCustomSignatureVersion Unsigned32,
|
|
bsnCustomSignatureConfigType INTEGER,
|
|
bsnCustomSignatureEnable TruthValue,
|
|
bsnCustomSignatureMacInfo BsnTxtSignatureMacInfo,
|
|
bsnCustomSignatureMacFreq Unsigned32,
|
|
bsnCustomSignatureRowStatus RowStatus,
|
|
bsnCustomSignatureInterval Unsigned32
|
|
}
|
|
|
|
bsnCustomSignaturePrecedence OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Precedence of the signature. This specifies the order in
|
|
which the signature is applied to a packet."
|
|
::= { bsnCustomSignatureEntry 1 }
|
|
|
|
bsnCustomSignatureName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is used to configure the name on a
|
|
signature."
|
|
::= { bsnCustomSignatureEntry 2 }
|
|
|
|
bsnCustomSignatureDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is used to configure the description of a
|
|
signature."
|
|
::= { bsnCustomSignatureEntry 3 }
|
|
|
|
bsnCustomSignatureFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
management(0),
|
|
data(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the type of frame that needs to
|
|
match a signature."
|
|
::= { bsnCustomSignatureEntry 4 }
|
|
|
|
bsnCustomSignatureAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
report(1),
|
|
contain(2),
|
|
exclude(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the action to be taken once a
|
|
packet is found to match a signature."
|
|
::= { bsnCustomSignatureEntry 5 }
|
|
|
|
bsnCustomSignatureState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the state of a signature. It is
|
|
used to match packets only if the state is enabled."
|
|
::= { bsnCustomSignatureEntry 6 }
|
|
|
|
bsnCustomSignatureFrequency OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the frequency of the matching packets
|
|
after which the specified action is taken."
|
|
::= { bsnCustomSignatureEntry 7 }
|
|
|
|
bsnCustomSignatureQuietTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the quiet time in seconds during which no
|
|
matching packets are found after which the
|
|
attack is considered stopped."
|
|
::= { bsnCustomSignatureEntry 8 }
|
|
|
|
bsnCustomSignatureVersion OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the signature version."
|
|
::= { bsnCustomSignatureEntry 9 }
|
|
|
|
bsnCustomSignatureConfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pattern(0),
|
|
protocol(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the type of Signature
|
|
configuration. It's protocol when the protocol format is
|
|
used in the UI to configure this. Pattern is the config
|
|
type for all signatures in the released signature file
|
|
and when signatures are configured using pattern
|
|
format. Note: the signatures will be allowed to be
|
|
configured in later releases."
|
|
::= { bsnCustomSignatureEntry 10 }
|
|
|
|
bsnCustomSignatureEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the status of a particular
|
|
Custom signature on LWAPP APs, for use in performing
|
|
signature analysis on the received 802.11 data and/or
|
|
management frames.
|
|
|
|
A value of 'true' makes the Controller send the
|
|
'Signature Add LWAPP Message' to all the joined APs
|
|
with the status field set to 'enable'. This makes
|
|
the joined APs perform signature analysis on the
|
|
received 802.11 data and/or management frames and
|
|
report the discrepancies observed, if any, to the
|
|
Controller.
|
|
|
|
A value of 'false' makes the Controller send the
|
|
'Signature Add LWAPP Message' to all the joined APs
|
|
with the status field set to 'disable'. The joined
|
|
APs doesn't perform the signature analysis on the
|
|
received 802.11 data and/or management frames for
|
|
this particular signature, till the signature is
|
|
enabled."
|
|
DEFVAL { false }
|
|
::= { bsnCustomSignatureEntry 11 }
|
|
|
|
bsnCustomSignatureMacInfo OBJECT-TYPE
|
|
SYNTAX BsnTxtSignatureMacInfo
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the pattern followed by the
|
|
LWAPP APs to perform signature analysis with this
|
|
Custom signature and report the results to the
|
|
Controller."
|
|
::= { bsnCustomSignatureEntry 12 }
|
|
|
|
bsnCustomSignatureMacFreq OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the frequency of matching
|
|
packets from a particular source after which the
|
|
specified action is taken."
|
|
::= { bsnCustomSignatureEntry 13 }
|
|
|
|
bsnCustomSignatureRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for creation/deletion. Signature will allowed to be
|
|
created, deleted and edited in later releases."
|
|
::= { bsnCustomSignatureEntry 20 }
|
|
|
|
bsnCustomSignatureInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval of the signature. This specifies the interval
|
|
when the signature is applied to a packet."
|
|
::= { bsnCustomSignatureEntry 21 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Packet Matching Patterns of a Custom Signature
|
|
-- *******************************************************************
|
|
|
|
bsnCustomSignaturePatternTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnCustomSignaturePatternEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing the matching patterns specified for a
|
|
Standard Signature. These are instrumental in
|
|
matching the signature with a packet. A maximum of 5
|
|
patterns may be specifed for a signature.
|
|
These are used for matching in the order of their index."
|
|
::= { bsnSignatureConfig 4 }
|
|
|
|
bsnCustomSignaturePatternEntry OBJECT-TYPE
|
|
SYNTAX BsnCustomSignaturePatternEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX {
|
|
bsnCustomSignaturePrecedence,
|
|
bsnCustomSignaturePatternIndex
|
|
}
|
|
::= { bsnCustomSignaturePatternTable 1 }
|
|
|
|
BsnCustomSignaturePatternEntry ::= SEQUENCE {
|
|
bsnCustomSignaturePatternIndex Unsigned32,
|
|
bsnCustomSignaturePatternOffset Unsigned32,
|
|
bsnCustomSignaturePatternString DisplayString,
|
|
bsnCustomSignaturePatternMask DisplayString,
|
|
bsnCustomSignaturePatternOffSetStart BsnSignaturePatternOffSetStart,
|
|
bsnCustomSignaturePatternRowStatus RowStatus
|
|
}
|
|
|
|
bsnCustomSignaturePatternIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..5)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the pattern. This specifies the order in which
|
|
the pattern is checked against the packet contents."
|
|
::= { bsnCustomSignaturePatternEntry 1 }
|
|
|
|
bsnCustomSignaturePatternOffset OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Offset from the start of the packet where the AP looks
|
|
for a match to the pattern."
|
|
::= { bsnCustomSignaturePatternEntry 2 }
|
|
|
|
bsnCustomSignaturePatternString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..62))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the pattern string that the AP uses to match at
|
|
the offset. Example: 0x616c7068615f3178"
|
|
::= { bsnCustomSignaturePatternEntry 3 }
|
|
|
|
bsnCustomSignaturePatternMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..62))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the pattern mask. This is the bit mask that the
|
|
AP uses to mask out the bits in the packet at the given
|
|
offset. Example: 0xffffffffffffffff"
|
|
::= { bsnCustomSignaturePatternEntry 4 }
|
|
|
|
bsnCustomSignaturePatternOffSetStart OBJECT-TYPE
|
|
SYNTAX BsnSignaturePatternOffSetStart
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates how an offset should be applied
|
|
while doing signature analysis for QOS and non-QOS
|
|
data frames with this custom signature."
|
|
::= { bsnCustomSignaturePatternEntry 5 }
|
|
|
|
bsnCustomSignaturePatternRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for creation/deletion. Signature Pattern will
|
|
allowed to be created, deleted and edited in later releases."
|
|
::= { bsnCustomSignaturePatternEntry 15 }
|
|
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Global parameter for Signature Check enable/disable
|
|
-- ********************************************************************
|
|
|
|
bsnSignatureCheckState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be enabled to enforce check of all standard
|
|
and custom signatures. If disabled, there will be no check
|
|
for signatures, both custom and standard, by the switch."
|
|
DEFVAL { disable }
|
|
::= { bsnSignatureConfig 5 }
|
|
-- ********************************************************************
|
|
-- * Global RF ID Tag configuration
|
|
-- ********************************************************************
|
|
|
|
bsnRfIdTagConfig OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11Config 43 }
|
|
|
|
|
|
bsnRfIdTagStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be turned on to allow the switch to collect
|
|
data for tags."
|
|
::= { bsnRfIdTagConfig 1 }
|
|
|
|
bsnRfIdTagDataTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (60..7200)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of seconds after which the tag data is
|
|
deleted by the switch from its database if it didn't hear
|
|
from the tag again."
|
|
::= { bsnRfIdTagConfig 2 }
|
|
|
|
bsnRfIdTagAutoTimeoutStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be turned on to allow auto deletion of tag
|
|
data in the switch after expiration of Tag Data Timeout"
|
|
::= { bsnRfIdTagConfig 3 }
|
|
-- ********************************************************************
|
|
-- * Global AP Neighbor Authentication configuration
|
|
-- ********************************************************************
|
|
|
|
bsnAPNeighborAuthConfig OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11Config 44 }
|
|
|
|
|
|
bsnAPNeighborAuthStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag should be turned on to allow the AP-Neighbor
|
|
Authentication feature."
|
|
::= { bsnAPNeighborAuthConfig 1 }
|
|
|
|
bsnAPNeighborAuthAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication alarm trigger threshold."
|
|
::= { bsnAPNeighborAuthConfig 2 }
|
|
|
|
bsnRFNetworkName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..19))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF Network Group Name to which this Airespace Switch belongs.
|
|
Airespace Switches on a network form a RF Network Group as
|
|
well as a Mobility Group. RF Network Groups does the channel
|
|
and power management of AP while Mobility Group does load
|
|
balancing and hand off for clients."
|
|
::= { bsnGlobalDot11Config 45 }
|
|
|
|
bsnFastSSIDChangeFeature OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures Fast SSID changing feature for mobile-stations.
|
|
When enabled, permits mobile-stations to change SSIDs without
|
|
having to block and wait for SSID-cleanup on the switch to
|
|
occur."
|
|
::= { bsnGlobalDot11Config 46 }
|
|
-- ********************************************************************
|
|
-- * Mesh AP Configuration
|
|
-- ********************************************************************
|
|
|
|
bsnBridgingPolicyConfig OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11Config 47 }
|
|
|
|
|
|
bsnBridgingZeroTouchConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled, allows new bridging APs to negotiate with the
|
|
switch to acquire the shared secret key."
|
|
DEFVAL { disable }
|
|
::= { bsnBridgingPolicyConfig 1 }
|
|
|
|
bsnBridgingSharedSecretKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key that is used to negotiate a secure LWAPP connection
|
|
between a switch and a bridging or mesh AP."
|
|
::= { bsnBridgingPolicyConfig 2 }
|
|
-- ********************************************************************
|
|
-- * BSN Global 802.11a and 802.11b Parameters
|
|
-- ********************************************************************
|
|
|
|
bsnGlobalDot11b OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11 2 }
|
|
|
|
bsnGlobalDot11a OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11 3 }
|
|
|
|
bsnGlobalDot11h OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11 4 }
|
|
|
|
-- ********************************************************************
|
|
-- * BSN Global Parameters for Dot11B
|
|
-- ********************************************************************
|
|
|
|
bsnGlobalDot11bConfig OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11b 1 }
|
|
|
|
|
|
bsnGlobalDot11bNetworkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11b Network Admin Status."
|
|
::= { bsnGlobalDot11bConfig 1 }
|
|
|
|
bsnGlobalDot11bBeaconPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (20..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of TU that a
|
|
AP Radio shall use for scheduling Beacon tranmissions.
|
|
This value is transmitted in Beacon and Probe Response
|
|
frames."
|
|
::= { bsnGlobalDot11bConfig 2 }
|
|
|
|
bsnGlobalDot11bDynamicChannelAssignment OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
runOnce(2),
|
|
static(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic channel assignment(DCA) has three modes. When the mode
|
|
is auto, the channel assignment will be periodically updated for
|
|
all Airespace APs that permit this operation. When the DCA is
|
|
runOnce, channel assignments are updated based on the UPDATE_CMD
|
|
received from the management. When the DCA is static, no dynamic
|
|
channel assignments occurs and value are set to their global
|
|
default. Default is auto."
|
|
DEFVAL { automatic }
|
|
::= { bsnGlobalDot11bConfig 3 }
|
|
|
|
bsnGlobalDot11bCurrentChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..14)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operating frequency channel of the DSSS
|
|
PHY. Valid channel numbers are as defined in 15.4.6.2.
|
|
This attribute will be read-only if
|
|
bsnAPIfPhyChannelAutomaticOn is true."
|
|
::= { bsnGlobalDot11bConfig 4 }
|
|
|
|
bsnGlobalDot11bDynamicChannelUpdateInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Channel dynamic alogirthm is running, this interval (in
|
|
secs) specifies how often Channel assignement updates are
|
|
attempted on an Airespace AP. NOTE: hysteresis is built into
|
|
the algorithms so we will not have uproductive changes
|
|
occuring. Default value is 600 secs"
|
|
DEFVAL { 600 }
|
|
::= { bsnGlobalDot11bConfig 5 }
|
|
|
|
bsnGlobalDot11bInputsForDCA OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is a bit mask specifying what to include in
|
|
DCA optimization.Below is a list of parameters and their
|
|
corresponding bits identifiers.
|
|
options bit
|
|
--------------------------------------
|
|
none 0
|
|
SIGNAL STRENGTH 1
|
|
NOISE 2
|
|
FOREIGN INTERFERENCE 4
|
|
LOAD 8
|
|
DEVICE INTERFERENCE 32
|
|
Default value is 63( all bits on)."
|
|
DEFVAL { 63 }
|
|
::= { bsnGlobalDot11bConfig 6 }
|
|
|
|
bsnGlobalDot11bChannelUpdateCmdInvoke OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
activate(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to activate this starts a DCA calculation regardless
|
|
of the dynamic update interval. This command should be invoke
|
|
on Group Leader Airespace Switch.Invoking on a Airespace
|
|
Switch which is not a Group leader has no effect."
|
|
::= { bsnGlobalDot11bConfig 7 }
|
|
|
|
bsnGlobalDot11bChannelUpdateCmdStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"After setting bsnGlobalDot11bChannelUpdateCmdInvoke to
|
|
activate, the result of action can be monitored from here. It
|
|
takes 5 minutes for the command to complete."
|
|
::= { bsnGlobalDot11bConfig 8 }
|
|
|
|
bsnGlobalDot11bDynamicTransmitPowerControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
runOnce(2),
|
|
static(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic transmit power (DTP) has three modes. When the mode
|
|
is auto, the transmit power of each Airespace AP will be
|
|
periodically updated for all Airespace APs that permit this
|
|
operation. When the DTP is runOnce,transmit power update will
|
|
occur based on the UPDATE_CMD received from the management.
|
|
When the DTP is static, no dynamic transmit power updates
|
|
occur and their global defaults are used. Default is auto."
|
|
DEFVAL { automatic }
|
|
::= { bsnGlobalDot11bConfig 9 }
|
|
|
|
bsnGlobalDot11bDynamicTxPowerControlInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Tx PowerControl dynamic alogirthm is running, this
|
|
interval(in secs) specifies how often TxPower control updates
|
|
are attempted on an Airespace AP. NOTE: hysteresis is
|
|
build into the algorithms so we will not have uproductive
|
|
changes occuring. Default value is 600 secs"
|
|
DEFVAL { 600 }
|
|
::= { bsnGlobalDot11bConfig 10 }
|
|
|
|
bsnGlobalDot11bCurrentTxPowerLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TxPowerLevel N currently being used to transmit data.
|
|
Some PHYs also use this value to determine the receiver
|
|
sensitivity requirements for CCA."
|
|
::= { bsnGlobalDot11bConfig 11 }
|
|
|
|
bsnGlobalDot11bInputsForDTP OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is a bit mask specifying what to include in
|
|
DCA optimization.Below is a list of parameters and their
|
|
corresponding bits identifiers.
|
|
options bit
|
|
--------------------------------------
|
|
none 0
|
|
LOAD 1
|
|
SIGNAL STRENGTH 2
|
|
FOREIGN INTERFERENCE 4
|
|
NOISE 8
|
|
Default value is 15( all bits on)."
|
|
DEFVAL { 15 }
|
|
::= { bsnGlobalDot11bConfig 12 }
|
|
|
|
bsnGlobalDot11bPowerUpdateCmdInvoke OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
activate(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to activate this starts a DTP calculation regardless
|
|
of the dynamic update interval. This command should be
|
|
invoke on Group Leader Airespace Switch.Invoking on a
|
|
Airespace Switch which is not a Group leader has no effect."
|
|
::= { bsnGlobalDot11bConfig 13 }
|
|
|
|
bsnGlobalDot11bPowerUpdateCmdStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"After setting bsnGlobalDot11aChannelUpdateCmdInvoke to
|
|
activate, the result of action can be monitored from here. It
|
|
takes 5 minutes for the command to complete."
|
|
::= { bsnGlobalDot11bConfig 14 }
|
|
|
|
bsnGlobalDot11bDataRate1Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11bConfig 15 }
|
|
|
|
bsnGlobalDot11bDataRate2Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11bConfig 16 }
|
|
|
|
bsnGlobalDot11bDataRate5AndHalfMhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11bConfig 17 }
|
|
|
|
bsnGlobalDot11bDataRate11Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11bConfig 18 }
|
|
|
|
bsnGlobalDot11bShortPreamble OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11b Short Preamble."
|
|
::= { bsnGlobalDot11bConfig 19 }
|
|
|
|
bsnGlobalDot11bDot11gSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is enabled to also support 802.11g protocol on the
|
|
802.11b network. Enabling 802.11g allows additional data
|
|
rates: 6, 9, 12, 18, 24, 36, 48, 54 Mbps."
|
|
::= { bsnGlobalDot11bConfig 20 }
|
|
|
|
bsnGlobalDot11bDataRate6Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled. This
|
|
is configurable only if 802.11g support is enabled."
|
|
::= { bsnGlobalDot11bConfig 21 }
|
|
|
|
bsnGlobalDot11bDataRate9Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled. This
|
|
is configurable only if 802.11g support is enabled."
|
|
::= { bsnGlobalDot11bConfig 22 }
|
|
|
|
bsnGlobalDot11bDataRate12Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled. This
|
|
is configurable only if 802.11g support is enabled."
|
|
::= { bsnGlobalDot11bConfig 23 }
|
|
|
|
bsnGlobalDot11bDataRate18Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled. This
|
|
is configurable only if 802.11g support is enabled."
|
|
::= { bsnGlobalDot11bConfig 24 }
|
|
|
|
bsnGlobalDot11bDataRate24Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled. This
|
|
is configurable only if 802.11g support is enabled."
|
|
::= { bsnGlobalDot11bConfig 25 }
|
|
|
|
bsnGlobalDot11bDataRate36Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled. This
|
|
is configurable only if 802.11g support is enabled."
|
|
::= { bsnGlobalDot11bConfig 26 }
|
|
|
|
bsnGlobalDot11bDataRate48Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled. This
|
|
is configurable only if 802.11g support is enabled."
|
|
::= { bsnGlobalDot11bConfig 27 }
|
|
|
|
bsnGlobalDot11bDataRate54Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled. This
|
|
is configurable only if 802.11g support is enabled."
|
|
::= { bsnGlobalDot11bConfig 28 }
|
|
|
|
bsnGlobalDot11bPicoCellMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the 802.11b pico-cell mode. This cannot be enabled
|
|
when the Fast Roaming Mode is enabled."
|
|
::= { bsnGlobalDot11bConfig 29 }
|
|
|
|
bsnGlobalDot11bFastRoamingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the 802.11b fast-roaming mode. This cannot be enabled
|
|
when the Pico Cell Mode is enabled."
|
|
::= { bsnGlobalDot11bConfig 30 }
|
|
|
|
bsnGlobalDot11bFastRoamingVoipMinRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(0),
|
|
rate1Mbps(1),
|
|
rate2Mbps(2),
|
|
rate5andHalfMbps(3),
|
|
rate11Mbps(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the minimum transmission rate allowed for VoIP on any
|
|
802.11b radio."
|
|
::= { bsnGlobalDot11bConfig 31 }
|
|
|
|
bsnGlobalDot11bFastRoamingVoipPercentage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
zero(1),
|
|
twentyfive(2),
|
|
fifty(3),
|
|
seventyfive(4),
|
|
hundred(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the percentage of effective bandwidth for the minimum
|
|
rate reserved for VoIP."
|
|
::= { bsnGlobalDot11bConfig 32 }
|
|
|
|
bsnGlobalDot11b80211eMaxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents the maximum bandwidth allocated to 802.11e
|
|
clients. It is expressed as percentage of the total bandwidth of
|
|
802.11b network. The value of this attribute can vary from 0 to
|
|
100."
|
|
::= { bsnGlobalDot11bConfig 33 }
|
|
|
|
bsnGlobalDot11bDTPCSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute may be used to enable the DTPC support on all
|
|
802.11b/g radios. DTPC or Dynamic Transmit Power Control support
|
|
means that the radio's transmit power will be advertised in the
|
|
beacons and probe responses."
|
|
::= { bsnGlobalDot11bConfig 34 }
|
|
-- ********************************************************************
|
|
-- * Begin of bsnGlobalDot11bPhy
|
|
-- ********************************************************************
|
|
|
|
bsnGlobalDot11bPhy OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11b 2 }
|
|
|
|
|
|
bsnGlobalDot11bMediumOccupancyLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum amount of time,
|
|
in TU, that a point coordinator may control the usage of
|
|
the wireless medium without relinquishing control for long
|
|
enough to allow at least one instance of DCF access to the
|
|
medium. The default value of this attribute shall be 100,
|
|
and the maximum value shall be 1000."
|
|
::= { bsnGlobalDot11bPhy 1 }
|
|
|
|
bsnGlobalDot11bCFPPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The attribute shall describe the number of DTIM intervals
|
|
between the start of CFPs. It is modified by
|
|
MLME-START.request primitive."
|
|
::= { bsnGlobalDot11bPhy 2 }
|
|
|
|
bsnGlobalDot11bCFPMaxDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The attribute shall describe the maximum duration of the CFP
|
|
in TU that may be generated by the PCF. It is modified by
|
|
MLME-START.request primitive."
|
|
::= { bsnGlobalDot11bPhy 3 }
|
|
|
|
bsnGlobalDot11bCFPollable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this attribute is true, it shall indicate that the STA
|
|
is able to respond to a CF-Poll with a data frame within a
|
|
SIFS time. This attribute shall be false if the STA is not
|
|
able to respond to a CF-Poll with a data frame within a SIFS
|
|
time."
|
|
::= { bsnGlobalDot11bPhy 5 }
|
|
|
|
bsnGlobalDot11bCFPollRequest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies wheather CFP"
|
|
::= { bsnGlobalDot11bPhy 6 }
|
|
|
|
bsnGlobalDot11bDTIMPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of beacon
|
|
intervals that shall elapse between transmission of
|
|
Beacons frames containing a TIM element whose DTIM
|
|
Count field is 0. This value is transmitted in
|
|
the DTIM Period field of Beacon frames."
|
|
::= { bsnGlobalDot11bPhy 7 }
|
|
|
|
bsnGlobalDot11bMaximumTransmitPowerLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum transmit power,
|
|
in dBm, allowed in the subband for the associated domain
|
|
country string. The default value of this attribute shall
|
|
be zero."
|
|
::= { bsnGlobalDot11bPhy 8 }
|
|
|
|
bsnGlobalDot11bFirstChannelNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute shall indicate the value of the lowest
|
|
channel number in the subband for the associated domain
|
|
country string. The default value of this attribute shall
|
|
be zero."
|
|
::= { bsnGlobalDot11bPhy 9 }
|
|
|
|
bsnGlobalDot11bNumberofChannels OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute shall indicate the value of the total
|
|
number of channels allowed in the subband for the
|
|
associated domain country string. The default value of
|
|
this attribute shall be zero."
|
|
::= { bsnGlobalDot11bPhy 10 }
|
|
|
|
bsnGlobalDot11bRTSThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2347)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the number of octets in an MPDU,
|
|
below which an RTS/CTS handshake shall not be performed. An
|
|
RTS/CTS handshake shall be performed at the beginning of any
|
|
frame exchange sequence where the MPDU is of type Data or
|
|
Management, the MPDU has an individual address in the Address1
|
|
field, and the length of the MPDU is greater than
|
|
this threshold. (For additional details, refer to Table 21 in
|
|
9.7.) Setting this attribute to be larger than the maximum
|
|
MSDU size shall have the effect of turning off the RTS/CTS
|
|
handshake for frames of Data or Management type transmitted by
|
|
this STA. Setting this attribute to zero shall have the effect
|
|
of turning on the RTS/CTS handshake for all frames of Data or
|
|
Management type transmitted by this STA. The default value of
|
|
this attribute shall be 2347."
|
|
::= { bsnGlobalDot11bPhy 11 }
|
|
|
|
bsnGlobalDot11bShortRetryLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum number of
|
|
transmission attempts of a frame, the length of which is less
|
|
than or equal to bsnGlobalDot11RTSThreshold, that shall be made
|
|
before a failure condition is indicated. The default value of
|
|
this attribute shall be 7."
|
|
::= { bsnGlobalDot11bPhy 12 }
|
|
|
|
bsnGlobalDot11bLongRetryLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum number of
|
|
transmission attempts of a frame, the length of which is
|
|
greater than bsnGlobalDot11RTSThreshold, that shall be made
|
|
before a failure condition is indicated. The default value of
|
|
this attribute shall be 4."
|
|
::= { bsnGlobalDot11bPhy 13 }
|
|
|
|
bsnGlobalDot11bFragmentationThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (256..2346)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the current maximum size, in
|
|
octets, of the MPDU that may be delivered to the PHY. An MSDU
|
|
shall be broken into fragments if its size exceeds the value
|
|
of this attribute after adding MAC headers and trailers. An
|
|
MSDU or MMPDU shall be fragmented when the resulting frame has
|
|
individual address in the Address1 field, and the length of the
|
|
frame is larger than this threshold. The default value for this
|
|
attribute shall be the lesser of 2346 or the aMPDUMaxLength of
|
|
the attached PHY and shall never exceed the lesser of 2346 or
|
|
the aMPDUMaxLength of the attached PHY. The value of this
|
|
attribute shall never be less than 256."
|
|
::= { bsnGlobalDot11bPhy 14 }
|
|
|
|
bsnGlobalDot11bMaxTransmitMSDULifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MaxTransmitMSDULifetime shall be the elapsed time in TU,
|
|
after the initial transmission of an MSDU, after which further
|
|
attempts to transmit the MSDU shall be terminated. The default
|
|
value of this attribute shall be 512."
|
|
::= { bsnGlobalDot11bPhy 15 }
|
|
|
|
bsnGlobalDot11bMaxReceiveLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MaxReceiveLifetime shall be the elapsed time in TU,
|
|
after the initial reception of a fragmented MMPDU or MSDU,
|
|
after which further attempts to reassemble the MMPDU or
|
|
MSDU shall be terminated. The default value shall be
|
|
512."
|
|
::= { bsnGlobalDot11bPhy 16 }
|
|
|
|
bsnGlobalDot11bEDThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current Energy Detect Threshold being used by the
|
|
DSSS PHY."
|
|
::= { bsnGlobalDot11bPhy 17 }
|
|
|
|
bsnGlobalDot11bChannelAgilityEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates that the PHY channel agility
|
|
functionality is enabled."
|
|
::= { bsnGlobalDot11bPhy 18 }
|
|
|
|
bsnGlobalDot11bPBCCOptionImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when true, shall indicate that the PBCC
|
|
modulation option as defined in subclause 18.4.6.6 is
|
|
implemented. The default value of this attribute shall
|
|
be false."
|
|
::= { bsnGlobalDot11bPhy 19 }
|
|
|
|
bsnGlobalDot11bShortPreambleOptionImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when true, shall indicate that the
|
|
short preamble option as defined in subclause 18.2.2.2
|
|
is implemented. The default value of this attribute
|
|
shall be false."
|
|
::= { bsnGlobalDot11bPhy 20 }
|
|
-- ********************************************************************
|
|
-- * BSN Global Parameters for Dot11A
|
|
-- ********************************************************************
|
|
|
|
bsnGlobalDot11aConfig OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11a 1 }
|
|
|
|
|
|
bsnGlobalDot11aNetworkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dot11a Network Status"
|
|
::= { bsnGlobalDot11aConfig 1 }
|
|
|
|
bsnGlobalDot11aLowBandNetwork OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dot11a Low Band Network Status"
|
|
::= { bsnGlobalDot11aConfig 2 }
|
|
|
|
bsnGlobalDot11aMediumBandNetwork OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dot11a Mid Band Network Status"
|
|
::= { bsnGlobalDot11aConfig 3 }
|
|
|
|
bsnGlobalDot11aHighBandNetwork OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dot11a High Band Network Status"
|
|
::= { bsnGlobalDot11aConfig 4 }
|
|
|
|
bsnGlobalDot11aBeaconPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (20..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of TU that a
|
|
AP Radio shall use for scheduling Beacon tranmissions.
|
|
This value is transmitted in Beacon and Probe Response
|
|
frames."
|
|
::= { bsnGlobalDot11aConfig 5 }
|
|
|
|
bsnGlobalDot11aDynamicChannelAssignment OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
runOnce(2),
|
|
static(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic channel assignment(DCA) has three modes. When the mode
|
|
is auto, the channel assignment will be periodically updated
|
|
for all Airespace APs that permit this operation. When the DCA
|
|
is runOnce, channel assignments are updated based on the
|
|
UPDATE_CMD received from the management. When the DCA is
|
|
static, no dynamic channel assignments occurs and value are
|
|
set to their global default. Default is auto."
|
|
DEFVAL { automatic }
|
|
::= { bsnGlobalDot11aConfig 6 }
|
|
|
|
bsnGlobalDot11aCurrentChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the current operating frequency channel of the
|
|
OFDM PHY."
|
|
::= { bsnGlobalDot11aConfig 7 }
|
|
|
|
bsnGlobalDot11aDynamicChannelUpdateInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Channel dynamic alogirthm is running, this interval(in
|
|
secs) specifies how often Channel assignement updates are
|
|
attempted on an Airespace AP. NOTE: hysteresis is
|
|
build into the algorithms so we will not have uproductive
|
|
changes occuring. Default value is 600 secs"
|
|
DEFVAL { 600 }
|
|
::= { bsnGlobalDot11aConfig 8 }
|
|
|
|
bsnGlobalDot11aInputsForDCA OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is a bit mask specifying what to include in
|
|
DCA optimization.Below is a list of parameters and their
|
|
corresponding bits identifiers.
|
|
options bit
|
|
--------------------------------------
|
|
none 0
|
|
SIGNAL STRENGTH 1
|
|
NOISE 2
|
|
FOREIGN INTERFERENCE 4
|
|
LOAD 8
|
|
DEVICE INTERFERENCE 32
|
|
Default value is 63( all bits on)."
|
|
DEFVAL { 63 }
|
|
::= { bsnGlobalDot11aConfig 9 }
|
|
|
|
bsnGlobalDot11aChannelUpdateCmdInvoke OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
activate(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to activate this starts a DCA calculation regardless
|
|
of the dynamic update interval. This command should be invoke
|
|
on Group Leader Airespace Switch.Invoking on a Airespace
|
|
Switch which is not a Group leader has no effect."
|
|
::= { bsnGlobalDot11aConfig 10 }
|
|
|
|
bsnGlobalDot11aChannelUpdateCmdStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"After setting bsnGlobalDot11aChannelUpdateCmdInvoke to
|
|
activate, the result of action can be monitored from here. It
|
|
takes 5 minutes for the command to complete."
|
|
::= { bsnGlobalDot11aConfig 11 }
|
|
|
|
bsnGlobalDot11aDynamicTransmitPowerControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
runOnce(2),
|
|
static(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic transmit power (DTP) has three modes. When the mode
|
|
is auto, the transmit power of each Airespace AP will be
|
|
periodically updated for all Airespace APs that permit this
|
|
operation. When the DTP is runOnce,transmit power update will
|
|
occur based on the UPDATE_CMD received from the management.
|
|
When the DTP is static, no dynamic transmit power updates
|
|
occur and their global defaults are used. Default is auto."
|
|
DEFVAL { automatic }
|
|
::= { bsnGlobalDot11aConfig 12 }
|
|
|
|
bsnGlobalDot11aCurrentTxPowerLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TxPowerLevel N currently being used to transmit data.
|
|
Some PHYs also use this value to determine the receiver
|
|
sensitivity requirements for CCA."
|
|
::= { bsnGlobalDot11aConfig 13 }
|
|
|
|
bsnGlobalDot11aDynamicTxPowerControlInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Tx PowerControl dynamic alogirthm is running, this
|
|
interval(in secs) specifies how often TxPower control updates
|
|
are attempted on an Airespace AP. NOTE: hysteresis is
|
|
build into the algorithms so we will not have uproductive
|
|
changes occuring. Default value is 600 secs"
|
|
DEFVAL { 600 }
|
|
::= { bsnGlobalDot11aConfig 14 }
|
|
|
|
bsnGlobalDot11aInputsForDTP OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is a bit mask specifying what to include in
|
|
DCA optimization.Below is a list of parameters and their
|
|
corresponding bits identifiers.
|
|
options bit
|
|
--------------------------------------
|
|
none 0
|
|
LOAD 1
|
|
SIGNAL STRENGTH 2
|
|
FOREIGN INTERFERENCE 4
|
|
NOISE 8
|
|
Default value is 15( all bits on)."
|
|
DEFVAL { 15 }
|
|
::= { bsnGlobalDot11aConfig 15 }
|
|
|
|
bsnGlobalDot11aPowerUpdateCmdInvoke OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
activate(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to activate this starts a DTP calculation regardless
|
|
of the dynamic update interval. This command should be invoke
|
|
on Group Leader Airespace Switch.Invoking on a Airespace
|
|
Switch which is not a Group leader has no effect."
|
|
::= { bsnGlobalDot11aConfig 16 }
|
|
|
|
bsnGlobalDot11aPowerUpdateCmdStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"After setting bsnGlobalDot11aChannelUpdateCmdInvoke to
|
|
activate, the result of action can be monitored from here. It
|
|
takes 5 minutes for the command to complete."
|
|
::= { bsnGlobalDot11aConfig 17 }
|
|
|
|
bsnGlobalDot11aDataRate6Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11aConfig 19 }
|
|
|
|
bsnGlobalDot11aDataRate9Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11aConfig 20 }
|
|
|
|
bsnGlobalDot11aDataRate12Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11aConfig 21 }
|
|
|
|
bsnGlobalDot11aDataRate18Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11aConfig 22 }
|
|
|
|
bsnGlobalDot11aDataRate24Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11aConfig 23 }
|
|
|
|
bsnGlobalDot11aDataRate36Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11aConfig 24 }
|
|
|
|
bsnGlobalDot11aDataRate48Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11aConfig 25 }
|
|
|
|
bsnGlobalDot11aDataRate54Mhz OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported(1),
|
|
mandatory(2),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify if this rate is supported or mandatory or disabled"
|
|
::= { bsnGlobalDot11aConfig 26 }
|
|
|
|
bsnGlobalDot11aPicoCellMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the 802.11a pico-cell mode. This cannot be enabled
|
|
when the Fast Roaming Mode is enabled."
|
|
::= { bsnGlobalDot11aConfig 27 }
|
|
|
|
bsnGlobalDot11aFastRoamingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the 802.11a fast-roaming mode. This cannot be enabled
|
|
when the Pico Cell Mode is enabled."
|
|
::= { bsnGlobalDot11aConfig 28 }
|
|
|
|
bsnGlobalDot11aFastRoamingVoipMinRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(0),
|
|
rate1Mbps(1),
|
|
rate2Mbps(2),
|
|
rate5andHalfMbps(3),
|
|
rate11Mbps(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the minimum transmission rate allowed for VoIP on any
|
|
802.11a radio."
|
|
::= { bsnGlobalDot11aConfig 29 }
|
|
|
|
bsnGlobalDot11aFastRoamingVoipPercentage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
zero(1),
|
|
twentyfive(2),
|
|
fifty(3),
|
|
seventyfive(4),
|
|
hundred(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the percentage of effective bandwidth for the minimum
|
|
rate reserved for VoIP."
|
|
::= { bsnGlobalDot11aConfig 30 }
|
|
|
|
bsnGlobalDot11a80211eMaxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents the maximum bandwidth allocated to 802.11e
|
|
clients. It is expressed as percentage of the total bandwidth
|
|
of 802.11a network. The value of this attribute can vary from
|
|
0 to 100."
|
|
::= { bsnGlobalDot11aConfig 31 }
|
|
|
|
bsnGlobalDot11aDTPCSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute may be used to enable the DTPC support on all
|
|
802.11a radios. DTPC or Dynamic Transmit Power Control support
|
|
means that the radio's transmit power will be advertised in the
|
|
beacons and probe responses."
|
|
::= { bsnGlobalDot11aConfig 32 }
|
|
-- ********************************************************************
|
|
-- * Begin of bsnGlobalDot11aPhy
|
|
-- ********************************************************************
|
|
|
|
bsnGlobalDot11aPhy OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11a 2 }
|
|
|
|
|
|
bsnGlobalDot11aMediumOccupancyLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum amount of time,
|
|
in TU, that a point coordinator may control the usage of
|
|
the wireless medium without relinquishing control for long
|
|
enough to allow at least one instance of DCF access to the
|
|
medium. The default value of this attribute shall be 100,
|
|
and the maximum value shall be 1000."
|
|
::= { bsnGlobalDot11aPhy 1 }
|
|
|
|
bsnGlobalDot11aCFPPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The attribute shall describe the number of DTIM intervals
|
|
between the start of CFPs. It is modified by
|
|
MLME-START.request primitive."
|
|
::= { bsnGlobalDot11aPhy 2 }
|
|
|
|
bsnGlobalDot11aCFPMaxDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The attribute shall describe the maximum duration of the CFP
|
|
in TU that may be generated by the PCF. It is modified by
|
|
MLME-START.request primitive."
|
|
::= { bsnGlobalDot11aPhy 3 }
|
|
|
|
bsnGlobalDot11aCFPollable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this attribute is true, it shall indicate that the STA
|
|
is able to respond to a CF-Poll with a data frame within a
|
|
SIFS time. This attribute shall be false if the STA is not
|
|
able to respond to a CF-Poll with a data frame within a SIFS
|
|
time."
|
|
::= { bsnGlobalDot11aPhy 5 }
|
|
|
|
bsnGlobalDot11aCFPollRequest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether CFP"
|
|
::= { bsnGlobalDot11aPhy 6 }
|
|
|
|
bsnGlobalDot11aDTIMPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of beacon
|
|
intervals that shall elapse between transmission of
|
|
Beacons frames containing a TIM element whose DTIM
|
|
Count field is 0. This value is transmitted in
|
|
the DTIM Period field of Beacon frames."
|
|
::= { bsnGlobalDot11aPhy 7 }
|
|
|
|
bsnGlobalDot11aMaximumTransmitPowerLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum transmit power,
|
|
in dBm, allowed in the subband for the associated domain
|
|
country string. The default value of this attribute shall
|
|
be zero."
|
|
::= { bsnGlobalDot11aPhy 8 }
|
|
|
|
bsnGlobalDot11aFirstChannelNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute shall indicate the value of the lowest
|
|
channel number in the subband for the associated domain
|
|
country string.
|
|
The default value of this attribute shall be zero."
|
|
::= { bsnGlobalDot11aPhy 9 }
|
|
|
|
bsnGlobalDot11aNumberofChannels OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This attribute shall indicate the value of the total
|
|
number of channels allowed in the subband for the
|
|
associated domain country string. The default value of
|
|
this attribute shall be zero."
|
|
::= { bsnGlobalDot11aPhy 10 }
|
|
|
|
bsnGlobalDot11aRTSThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2347)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the number of octets in an MPDU,
|
|
below which an RTS/CTS handshake shall not be performed. An
|
|
RTS/CTS handshake shall be performed at the beginning of any
|
|
frame exchange sequence where the MPDU is of type Data or
|
|
Management, the MPDU has an individual address in the Address1
|
|
field, and the length of the MPDU is greater than
|
|
this threshold. (For additional details, refer to Table 21 in
|
|
9.7.) Setting this attribute to be larger than the maximum
|
|
MSDU size shall have the effect of turning off the RTS/CTS
|
|
handshake for frames of Data or Management type transmitted by
|
|
this STA. Setting this attribute to zero shall have the effect
|
|
of turning on the RTS/CTS handshake for all frames of Data or
|
|
Management type transmitted by this STA. The default value of
|
|
this attribute shall be 2347."
|
|
::= { bsnGlobalDot11aPhy 11 }
|
|
|
|
bsnGlobalDot11aShortRetryLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum number of
|
|
transmission attempts of a frame, the length of which is less
|
|
than or equal to bsnGlobalDot11RTSThreshold, that shall be
|
|
made before a failure condition is indicated. The default
|
|
value of this attribute shall be 7."
|
|
::= { bsnGlobalDot11aPhy 12 }
|
|
|
|
bsnGlobalDot11aLongRetryLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum number of
|
|
transmission attempts of a frame, the length of which is
|
|
greater than bsnGlobalDot11RTSThreshold, that shall be made
|
|
before a failure condition is indicated. The default value of
|
|
this attribute shall be 4."
|
|
::= { bsnGlobalDot11aPhy 13 }
|
|
|
|
bsnGlobalDot11aFragmentationThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (256..2346)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the current maximum size, in
|
|
octets, of the MPDU that may be delivered to the PHY. An MSDU
|
|
shall be broken into fragments if its size exceeds the value
|
|
of this attribute after adding MAC headers and trailers. MSDU
|
|
or MMPDU shall be fragmented when the resulting frame has an
|
|
individual address in the Address1 field, and the length of the
|
|
frame is larger than this threshold. The default value for this
|
|
attribute shall be the lesser of 2346 or the aMPDUMaxLength of
|
|
the attached PHY and shall never exceed the lesser of 2346 or
|
|
the aMPDUMaxLength of the attached PHY. The value of this
|
|
attribute shall never be less than 256."
|
|
::= { bsnGlobalDot11aPhy 14 }
|
|
|
|
bsnGlobalDot11aMaxTransmitMSDULifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MaxTransmitMSDULifetime shall be the elapsed time in TU,
|
|
after the initial transmission of an MSDU, after which further
|
|
attempts to transmit the MSDU shall be terminated. The default
|
|
value of this attribute shall be 512."
|
|
::= { bsnGlobalDot11aPhy 15 }
|
|
|
|
bsnGlobalDot11aMaxReceiveLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MaxReceiveLifetime shall be the elapsed time in TU,
|
|
after the initial reception of a fragmented MMPDU or MSDU,
|
|
after which further attempts to reassemble the MMPDU or
|
|
MSDU shall be terminated. The default value shall be
|
|
512."
|
|
::= { bsnGlobalDot11aPhy 16 }
|
|
|
|
bsnGlobalDot11aTIThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Threshold being used to detect a busy medium (frequency).
|
|
CCA shall report a busy medium upon detecting the RSSI above
|
|
this threshold."
|
|
::= { bsnGlobalDot11aPhy 17 }
|
|
|
|
bsnGlobalDot11aChannelAgilityEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates that the PHY channel agility
|
|
functionality is enabled."
|
|
::= { bsnGlobalDot11aPhy 18 }
|
|
-- ********************************************************************
|
|
-- * BSN Global Parameters for Dot11h
|
|
-- ********************************************************************
|
|
|
|
bsnGlobalDot11hConfig OBJECT IDENTIFIER
|
|
::= { bsnGlobalDot11h 1 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- These global attributes are to Enable/Disable Power Control and
|
|
-- Channel Switch for 802.11h
|
|
-- *******************************************************************
|
|
|
|
bsnGlobalDot11hPowerConstraint OBJECT-TYPE
|
|
SYNTAX INTEGER (0..30)
|
|
UNITS "decibels"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local maximum transmit power for a channel is defined as
|
|
maximum transmit power level specified for the channel
|
|
in the Country element minus the local power constraint
|
|
specified for the channel in the Power Constraint
|
|
element.The power constraint is coded as an unsigned
|
|
integer in units of decibels. To disable
|
|
power constraint set Power Constraint to 0."
|
|
::= { bsnGlobalDot11hConfig 1 }
|
|
|
|
bsnGlobalDot11hChannelSwitchEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable channel switch. When disabling
|
|
Channel Switch no need to pass mode and count"
|
|
::= { bsnGlobalDot11hConfig 2 }
|
|
|
|
bsnGlobalDot11hChannelSwitchMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Channel Switch Mode indicates any restriction on
|
|
transmission until a channel switch. An Channel mode
|
|
set to 1 means that the STA in a BSS to which the
|
|
frame containing the element is addressed shall
|
|
tranmit no further frames with in the BSS until the
|
|
scheduled channel switch. A Channel switch mode set
|
|
to 0 does not impose any requirement on the receiving
|
|
STA."
|
|
::= { bsnGlobalDot11hConfig 3 }
|
|
-- ********************************************************************
|
|
-- * bsnRrm - Information about RF Groups that this Airespace Switch
|
|
-- * belongs to
|
|
-- ********************************************************************
|
|
|
|
bsnRrmDot11a OBJECT IDENTIFIER
|
|
::= { bsnRrm 1 }
|
|
|
|
bsnRrmDot11b OBJECT IDENTIFIER
|
|
::= { bsnRrm 2 }
|
|
|
|
-- *******************************************************************
|
|
-- * Begin of RRM dot11a Group Parameters
|
|
-- *******************************************************************
|
|
|
|
bsnRrmDot11aGroup OBJECT IDENTIFIER
|
|
::= { bsnRrmDot11a 1 }
|
|
|
|
|
|
bsnRrmDot11aGlobalAutomaticGrouping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic grouping has two modes: on and off. When the grouping
|
|
is off, no dynamic grouping occurs. Each Airespace Switch
|
|
optimizes only its own Airespace APs' parameters. When
|
|
grouping is on, the Airespace Switches form groups and
|
|
elect leaders to perform better dynamic parameter
|
|
optimization."
|
|
DEFVAL { automatic }
|
|
::= { bsnRrmDot11aGroup 1 }
|
|
|
|
bsnRrmDot11aGroupLeaderMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the MAC address of the group leader for the dot11a
|
|
group containing this Airespace Switch."
|
|
::= { bsnRrmDot11aGroup 2 }
|
|
|
|
bsnRrmIsDot11aGroupLeader OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this Airespace Switch is a Dot11a Group Leader then this
|
|
attribute will be true else it will be false."
|
|
::= { bsnRrmDot11aGroup 3 }
|
|
|
|
bsnRrmDot11aGroupLastUpdateTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last time the dot11a grouping was updated on this Airespace
|
|
Switch. This is valid only if the Airespace Switch is a
|
|
group leader."
|
|
::= { bsnRrmDot11aGroup 4 }
|
|
|
|
bsnRrmDot11aGlobalGroupInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When grouping is on, this interval(in secs) represents the
|
|
period with which the grouping algorithm is run. Grouping
|
|
algorithm will also run when the group contents changes and
|
|
the automatic grouping is enabled. A dynamic grouping can be
|
|
started upon request from the system administrator. Default
|
|
value is 3600 secs."
|
|
DEFVAL { 3600 }
|
|
::= { bsnRrmDot11aGroup 5 }
|
|
-- ************************************************************
|
|
-- * Begin of bsnWras SwitchDot11aGroup Table
|
|
-- ************************************************************
|
|
|
|
bsnWrasDot11aGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnWrasDot11aGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of Airespace Switch addresses that identifies
|
|
the members of the Dot11a RF group containing this Airespace
|
|
Switch. Max size is 20 entries."
|
|
::= { bsnRrmDot11aGroup 9 }
|
|
|
|
bsnWrasDot11aGroupEntry OBJECT-TYPE
|
|
SYNTAX BsnWrasDot11aGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"..."
|
|
INDEX { bsnWrasDot11aPeerMacAddress }
|
|
::= { bsnWrasDot11aGroupTable 1 }
|
|
|
|
BsnWrasDot11aGroupEntry ::= SEQUENCE {
|
|
bsnWrasDot11aPeerMacAddress MacAddress,
|
|
bsnWrasDot11aPeerIpAddress IpAddress
|
|
}
|
|
|
|
bsnWrasDot11aPeerMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the member Switch."
|
|
::= { bsnWrasDot11aGroupEntry 1 }
|
|
|
|
bsnWrasDot11aPeerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the Airespace Switch."
|
|
::= { bsnWrasDot11aGroupEntry 21 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin bsnRrmDot11aAPDefault
|
|
-- *******************************************************************
|
|
|
|
bsnRrmDot11aAPDefault OBJECT IDENTIFIER
|
|
::= { bsnRrmDot11a 6 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin bsnRrmDot11aAPProfile
|
|
-- *******************************************************************
|
|
|
|
bsnRrmDot11aForeignInterferenceThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"foreign 802.11A interference threshold between 0 and 100 percent."
|
|
::= { bsnRrmDot11aAPDefault 1 }
|
|
|
|
bsnRrmDot11aForeignNoiseThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-127..0)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A foreign noise threshold between -127 and 0 dBm."
|
|
::= { bsnRrmDot11aAPDefault 2 }
|
|
|
|
bsnRrmDot11aRFUtilizationThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A RF utlization threshold between 0 and 100 percent."
|
|
::= { bsnRrmDot11aAPDefault 3 }
|
|
|
|
bsnRrmDot11aThroughputThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1000..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A throughput threshold between 1000 and 100000"
|
|
::= { bsnRrmDot11aAPDefault 4 }
|
|
|
|
bsnRrmDot11aMobilesThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (1..75)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A mobiles threshold between 1 and 75"
|
|
::= { bsnRrmDot11aAPDefault 5 }
|
|
|
|
bsnRrmDot11aCoverageThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (3..50)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A coverage threshold between 3 and 50."
|
|
::= { bsnRrmDot11aAPDefault 6 }
|
|
|
|
bsnRrmDot11aMobileMinExceptionLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..75)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A mobile minimum exception level between 1 and 75"
|
|
::= { bsnRrmDot11aAPDefault 7 }
|
|
|
|
bsnRrmDot11aCoverageExceptionLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A coverage exception level between 0 and 100 percent."
|
|
::= { bsnRrmDot11aAPDefault 8 }
|
|
|
|
bsnRrmDot11aSignalMeasurementInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This interval (in secs) specifies how often do we get new
|
|
signal strength measurements at each Airespace AP. Default is
|
|
300 secs"
|
|
DEFVAL { 300 }
|
|
::= { bsnRrmDot11aAPDefault 9 }
|
|
|
|
bsnRrmDot11aNoiseMeasurementInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This interval( in secs) specifies how often do we get new
|
|
noise and interference measurements at each Airespace AP.
|
|
Default is 300 secs"
|
|
DEFVAL { 300 }
|
|
::= { bsnRrmDot11aAPDefault 10 }
|
|
|
|
bsnRrmDot11aLoadMeasurementInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This interval( in secs) specifies how often do we get new
|
|
load measurements at each Airespace AP. Default is 300 secs"
|
|
DEFVAL { 300 }
|
|
::= { bsnRrmDot11aAPDefault 11 }
|
|
|
|
bsnRrmDot11aCoverageMeasurementInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This interval( in secs) specifies how often do we get new
|
|
coverage measurements at each Airespace AP. Default is 300 secs"
|
|
DEFVAL { 300 }
|
|
::= { bsnRrmDot11aAPDefault 12 }
|
|
|
|
bsnRrmDot11aChannelMonitorList OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(1),
|
|
country(2),
|
|
dca(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the channels on which the switch monitors
|
|
noise, interference and rogues. The first option allows
|
|
monitoring on all channels while the second one on only those
|
|
that are supported by the country of operation. the option dca
|
|
implies that the monitor channel list will include those channels
|
|
that are used by automatic channel assignment."
|
|
::= { bsnRrmDot11aAPDefault 13 }
|
|
|
|
-- *********************************************************************
|
|
-- * Set Factory Defaults
|
|
-- *********************************************************************
|
|
|
|
bsnRrmDot11aSetFactoryDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
activate(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to activate all rrm parameters are reset to factory
|
|
defaults"
|
|
::= { bsnRrmDot11a 7 }
|
|
-- *******************************************************************
|
|
-- * Begin of RRM dot11b Group Parameters
|
|
-- *******************************************************************
|
|
|
|
bsnRrmDot11bGroup OBJECT IDENTIFIER
|
|
::= { bsnRrmDot11b 1 }
|
|
|
|
|
|
bsnRrmDot11bGlobalAutomaticGrouping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic grouping has two modes: on and off. When the grouping
|
|
is off, no dynamic grouping occurs. Each Airespace Switch
|
|
optimizes only its own Airespace APs' parameters. When
|
|
grouping is on, the Airespace Switchs form groups and
|
|
elect leaders to perform better dynamic parameter
|
|
optimization."
|
|
DEFVAL { automatic }
|
|
::= { bsnRrmDot11bGroup 1 }
|
|
|
|
bsnRrmDot11bGroupLeaderMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the MAC address of the group leader for the dot11b
|
|
group containing this Airespace Switch."
|
|
::= { bsnRrmDot11bGroup 2 }
|
|
|
|
bsnRrmIsDot11bGroupLeader OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this Airespace Switch is a Dot11b Group Leader then this
|
|
attribute will be true else it will be false."
|
|
::= { bsnRrmDot11bGroup 3 }
|
|
|
|
bsnRrmDot11bGroupLastUpdateTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last time the dot11b grouping was updated on this Airespace
|
|
Switch. This is valid only if the Airespace Switch is a group
|
|
leader."
|
|
::= { bsnRrmDot11bGroup 4 }
|
|
|
|
bsnRrmDot11bGlobalGroupInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When grouping is on, this interval(in secs) represents the
|
|
period with which the grouping algorithm is run. Grouping
|
|
algorithm will also run when the group contents changes and
|
|
the automatic grouping is enabled. A dynamic grouping can be
|
|
started upon request from the system administrator. Default
|
|
value is 3600 secs."
|
|
DEFVAL { 3600 }
|
|
::= { bsnRrmDot11bGroup 5 }
|
|
-- ************************************************************
|
|
-- * Begin of bsnWrasDot11bGroup Table
|
|
-- ************************************************************
|
|
|
|
bsnWrasDot11bGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnWrasDot11bGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table of Airespace Switch addresses that identifies
|
|
the members of the Dot11b RF group containing this Airespace
|
|
Switch. Max size is 20 entries."
|
|
::= { bsnRrmDot11bGroup 9 }
|
|
|
|
bsnWrasDot11bGroupEntry OBJECT-TYPE
|
|
SYNTAX BsnWrasDot11bGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"..."
|
|
INDEX { bsnWrasDot11bPeerMacAddress }
|
|
::= { bsnWrasDot11bGroupTable 1 }
|
|
|
|
BsnWrasDot11bGroupEntry ::= SEQUENCE {
|
|
bsnWrasDot11bPeerMacAddress MacAddress,
|
|
bsnWrasDot11bPeerIpAddress IpAddress
|
|
}
|
|
|
|
bsnWrasDot11bPeerMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the GIGE interface."
|
|
::= { bsnWrasDot11bGroupEntry 1 }
|
|
|
|
bsnWrasDot11bPeerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the Airespace Switch."
|
|
::= { bsnWrasDot11bGroupEntry 21 }
|
|
|
|
|
|
-- ************************************************************
|
|
-- * End of bsnWrasDot11bGroup Table
|
|
-- ************************************************************
|
|
--
|
|
|
|
-- ********************************************************************
|
|
-- * Begin bsnRrmDot11bAPDefault
|
|
-- *******************************************************************
|
|
|
|
bsnRrmDot11bAPDefault OBJECT IDENTIFIER
|
|
::= { bsnRrmDot11b 6 }
|
|
|
|
|
|
bsnRrmDot11bForeignInterferenceThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Foreign 802.11A interference threshold between 0 and 100
|
|
percent."
|
|
::= { bsnRrmDot11bAPDefault 1 }
|
|
|
|
bsnRrmDot11bForeignNoiseThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-127..0)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A foreign noise threshold between -127 and 0 dBm."
|
|
::= { bsnRrmDot11bAPDefault 2 }
|
|
|
|
bsnRrmDot11bRFUtilizationThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A RF utlization threshold between 0 and 100 percent."
|
|
::= { bsnRrmDot11bAPDefault 3 }
|
|
|
|
bsnRrmDot11bThroughputThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1000..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A Airespace AP data-rate threshold between 1000 and 100000"
|
|
::= { bsnRrmDot11bAPDefault 4 }
|
|
|
|
bsnRrmDot11bMobilesThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (1..75)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A Airespace AP mobiles threshold between 1 and 75"
|
|
::= { bsnRrmDot11bAPDefault 5 }
|
|
|
|
bsnRrmDot11bCoverageThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (3..50)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A Airespace AP coverage threshold between 3 and 50."
|
|
::= { bsnRrmDot11bAPDefault 6 }
|
|
|
|
bsnRrmDot11bMobileMinExceptionLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..75)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A Airespace AP mobile minimum exception level between 1 and
|
|
75"
|
|
::= { bsnRrmDot11bAPDefault 7 }
|
|
|
|
bsnRrmDot11bCoverageExceptionLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11A Airespace AP coverage exception level between 0 and 100
|
|
percent."
|
|
::= { bsnRrmDot11bAPDefault 8 }
|
|
|
|
bsnRrmDot11bSignalMeasurementInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This interval( in secs) specifies how often do we get new signal
|
|
strength measurements at each Airespace AP. Default is 300 secs"
|
|
DEFVAL { 300 }
|
|
::= { bsnRrmDot11bAPDefault 9 }
|
|
|
|
bsnRrmDot11bNoiseMeasurementInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This interval( in secs) specifies how often do we get new
|
|
noise and interference measurements at each Airespace AP.
|
|
Default is 300 secs"
|
|
DEFVAL { 300 }
|
|
::= { bsnRrmDot11bAPDefault 10 }
|
|
|
|
bsnRrmDot11bLoadMeasurementInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This interval( in secs) specifies how often do we get new
|
|
load measurements at each Airespace AP. Default is 300 secs"
|
|
DEFVAL { 300 }
|
|
::= { bsnRrmDot11bAPDefault 11 }
|
|
|
|
bsnRrmDot11bCoverageMeasurementInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (10..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This interval( in secs) specifies how often do we get new
|
|
coverage measurements at each Airespace AP. Default is 300 secs"
|
|
DEFVAL { 300 }
|
|
::= { bsnRrmDot11bAPDefault 12 }
|
|
|
|
bsnRrmDot11bChannelMonitorList OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(1),
|
|
country(2),
|
|
dca(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the channels on which the switch
|
|
monitors noise, interference and rogues.
|
|
The first option allows monitoring on all channels while the
|
|
second one on only those that are supported
|
|
by the country of operation. the option dca implies that the
|
|
monitor channel list will include those channels
|
|
that are used by automatic channel assignment."
|
|
::= { bsnRrmDot11bAPDefault 13 }
|
|
|
|
-- *********************************************************************
|
|
-- * Set Factory Defaults
|
|
-- *********************************************************************
|
|
|
|
bsnRrmDot11bSetFactoryDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
activate(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to activate all rrm parameters are reset to factory
|
|
defaults"
|
|
::= { bsnRrmDot11b 7 }
|
|
-- *******************************************************************
|
|
-- * Begin of bsnRadiusAuthServerTable
|
|
-- *******************************************************************
|
|
|
|
bsnRadiusAuthServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnRadiusAuthServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the RADIUS authentication
|
|
servers with which the client shares a secret."
|
|
::= { bsnAAA 1 }
|
|
|
|
bsnRadiusAuthServerEntry OBJECT-TYPE
|
|
SYNTAX BsnRadiusAuthServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing a RADIUS
|
|
authentication server with which the client shares
|
|
a secret."
|
|
INDEX { bsnRadiusAuthServerIndex }
|
|
::= { bsnRadiusAuthServerTable 1 }
|
|
|
|
BsnRadiusAuthServerEntry ::= SEQUENCE {
|
|
bsnRadiusAuthServerIndex Integer32,
|
|
bsnRadiusAuthServerAddress IpAddress,
|
|
bsnRadiusAuthClientServerPortNumber Integer32,
|
|
bsnRadiusAuthServerKey OCTET STRING,
|
|
bsnRadiusAuthServerStatus INTEGER,
|
|
bsnRadiusAuthServerKeyFormat INTEGER,
|
|
bsnRadiusAuthServerRFC3576 INTEGER,
|
|
bsnRadiusAuthServerIPSec INTEGER,
|
|
bsnRadiusAuthServerIPSecAuth INTEGER,
|
|
bsnRadiusAuthServerIPSecEncryption INTEGER,
|
|
bsnRadiusAuthServerIPSecIKEPhase1 INTEGER,
|
|
bsnRadiusAuthServerIPSecIKELifetime Integer32,
|
|
bsnRadiusAuthServerIPSecDHGroup INTEGER,
|
|
bsnRadiusAuthServerNetworkUserConfig INTEGER,
|
|
bsnRadiusAuthServerMgmtUserConfig INTEGER,
|
|
bsnRadiusAuthServerRetransmitTimeout INTEGER,
|
|
bsnRadiusAuthServerKeyWrapKEKkey OCTET STRING,
|
|
bsnRadiusAuthServerKeyWrapMACKkey OCTET STRING,
|
|
bsnRadiusAuthServerKeyWrapFormat INTEGER,
|
|
bsnRadiusAuthServerRowStatus RowStatus
|
|
}
|
|
|
|
bsnRadiusAuthServerIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..17)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying each RADIUS
|
|
Authentication server with which this client
|
|
communicates."
|
|
::= { bsnRadiusAuthServerEntry 1 }
|
|
|
|
bsnRadiusAuthServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the RADIUS authentication server
|
|
referred to in this table entry."
|
|
::= { bsnRadiusAuthServerEntry 2 }
|
|
|
|
bsnRadiusAuthClientServerPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP port the client is using to send requests to
|
|
this server."
|
|
::= { bsnRadiusAuthServerEntry 3 }
|
|
|
|
bsnRadiusAuthServerKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication and encryption key shared between
|
|
the Radius client and this Radius Server.
|
|
When the bsnRadiusAuthServerKeyFormat is hex it
|
|
can have max length of 128 bytes. If the
|
|
bsnRadiusAuthServerKeyFormat is Ascii it can have
|
|
max length of 64 bytes."
|
|
DEFVAL { "" }
|
|
::= { bsnRadiusAuthServerEntry 4 }
|
|
|
|
bsnRadiusAuthServerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Server enable or disable status."
|
|
::= { bsnRadiusAuthServerEntry 5 }
|
|
|
|
bsnRadiusAuthServerKeyFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hex(1),
|
|
ascii(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the server key. When hex, the number of
|
|
characters in the key should be even."
|
|
::= { bsnRadiusAuthServerEntry 6 }
|
|
|
|
bsnRadiusAuthServerRFC3576 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Support for Dynamic Authorization Extensions to RADIUS."
|
|
DEFVAL { enable }
|
|
::= { bsnRadiusAuthServerEntry 7 }
|
|
|
|
bsnRadiusAuthServerIPSec OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPSec over RADIUS"
|
|
DEFVAL { disable }
|
|
::= { bsnRadiusAuthServerEntry 8 }
|
|
|
|
bsnRadiusAuthServerIPSecAuth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
hmacMd5(1),
|
|
hmacSha1(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Hash algorithm employed by the IPSec Encrpytion.
|
|
This applies only when bsnRadiusAuthServerIPSec is in
|
|
enable state."
|
|
DEFVAL { hmacSha1 }
|
|
::= { bsnRadiusAuthServerEntry 9 }
|
|
|
|
bsnRadiusAuthServerIPSecEncryption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
des(1),
|
|
tripleDes(2),
|
|
aesCbc(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Encryption algorithm employed by this IpSec
|
|
Encryption. This applies only when
|
|
bsnRadiusAuthServerIPSec is in enable state."
|
|
DEFVAL { tripleDes }
|
|
::= { bsnRadiusAuthServerEntry 10 }
|
|
|
|
bsnRadiusAuthServerIPSecIKEPhase1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
main(1),
|
|
agressive(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPN IKE Phase 1 Mode type as per the IpSec standards.
|
|
This applies only when bsnRadiusAuthServerIPSec is in
|
|
enable state."
|
|
DEFVAL { main }
|
|
::= { bsnRadiusAuthServerEntry 11 }
|
|
|
|
bsnRadiusAuthServerIPSecIKELifetime OBJECT-TYPE
|
|
SYNTAX Integer32 (1800..345600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPSec IKE's Lifetime.
|
|
This applies only when bsnRadiusAuthServerIPSec is in
|
|
enable state."
|
|
DEFVAL { 28800 }
|
|
::= { bsnRadiusAuthServerEntry 12 }
|
|
|
|
bsnRadiusAuthServerIPSecDHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
group1(1),
|
|
group2(2),
|
|
group5(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IKE's Diffie-Hellman Group.
|
|
This applies only when bsnRadiusAuthServerIPSec is in
|
|
enable state."
|
|
DEFVAL { group2 }
|
|
::= { bsnRadiusAuthServerEntry 13 }
|
|
|
|
bsnRadiusAuthServerNetworkUserConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, this entry is considered as network user
|
|
radius authenticating server entry."
|
|
::= { bsnRadiusAuthServerEntry 14 }
|
|
|
|
bsnRadiusAuthServerMgmtUserConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, this entry is considered as management user
|
|
radius authenticating server entry."
|
|
::= { bsnRadiusAuthServerEntry 15 }
|
|
|
|
bsnRadiusAuthServerRetransmitTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (2..30)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time in seconds after which a radius authentication
|
|
request will timeout and a retransmission will be taken
|
|
up by the switch."
|
|
::= { bsnRadiusAuthServerEntry 17 }
|
|
|
|
bsnRadiusAuthServerKeyWrapKEKkey OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Key-encryption-key (KEK) used as the key for the 128 bit
|
|
AES Key Wrap algorithm to encrypt the PMK in the key
|
|
attribute. If the key is present in request, it should be
|
|
taken as a hint by the server that the sender prefers this
|
|
method of encryption over others.
|
|
To maintain security actual keys after configuration are never
|
|
returned in get request. If keys are configured then '***'
|
|
is returned. If keys are not configured then empty string is
|
|
retunred.
|
|
bsnRadiusAuthServerKeyFormat is used this key.
|
|
if the format chosen is ascii then it should be 16 bytes in
|
|
length. if the format chosen is hex then it should be 32
|
|
bytes in length."
|
|
::= { bsnRadiusAuthServerEntry 18 }
|
|
|
|
bsnRadiusAuthServerKeyWrapMACKkey OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Message-authenticator-code-key ( MACK) - used as the key for
|
|
the HMAC-SHA-1 algorithm to sign the RADIUS message to prevent
|
|
spoofing. MACK must be configured when KEK is configured.
|
|
To maintain security actual keys after configuration are never
|
|
returned in get request. If keys are configured then '***'
|
|
is returned. If keys are not configured then empty string is
|
|
returned.
|
|
bsnRadiusAuthServerKeyFormat is used this key.
|
|
if the format chosen is ascii then it should be 20 bytes in
|
|
length. If the format chosen is hex then it should be 40 bytes
|
|
in length."
|
|
::= { bsnRadiusAuthServerEntry 19 }
|
|
|
|
bsnRadiusAuthServerKeyWrapFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hex(1),
|
|
ascii(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format for the Key Wrap keys. This object is mandatory
|
|
for manager to send if the key Wrap keys are being
|
|
configured. Get on this object will always return hex(1)"
|
|
::= { bsnRadiusAuthServerEntry 20 }
|
|
|
|
bsnRadiusAuthServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for creation/deletion"
|
|
::= { bsnRadiusAuthServerEntry 26 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Begin of bsnRadiusAccServerTable
|
|
-- *******************************************************************
|
|
|
|
bsnRadiusAccServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnRadiusAccServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the RADIUS accounting
|
|
servers with which the client shares a secret."
|
|
::= { bsnAAA 2 }
|
|
|
|
bsnRadiusAccServerEntry OBJECT-TYPE
|
|
SYNTAX BsnRadiusAccServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing a RADIUS
|
|
accounting server with which the client shares a secret."
|
|
INDEX { bsnRadiusAccServerIndex }
|
|
::= { bsnRadiusAccServerTable 1 }
|
|
|
|
BsnRadiusAccServerEntry ::= SEQUENCE {
|
|
bsnRadiusAccServerIndex Integer32,
|
|
bsnRadiusAccServerAddress IpAddress,
|
|
bsnRadiusAccClientServerPortNumber Integer32,
|
|
bsnRadiusAccServerKey OCTET STRING,
|
|
bsnRadiusAccServerStatus INTEGER,
|
|
bsnRadiusAccServerKeyFormat INTEGER,
|
|
bsnRadiusAccServerIPSec INTEGER,
|
|
bsnRadiusAccServerIPSecAuth INTEGER,
|
|
bsnRadiusAccServerIPSecEncryption INTEGER,
|
|
bsnRadiusAccServerIPSecIKEPhase1 INTEGER,
|
|
bsnRadiusAccServerIPSecIKELifetime Integer32,
|
|
bsnRadiusAccServerIPSecDHGroup INTEGER,
|
|
bsnRadiusAccServerNetworkUserConfig INTEGER,
|
|
bsnRadiusAccServerRetransmitTimeout INTEGER,
|
|
bsnRadiusAccServerRowStatus RowStatus
|
|
}
|
|
|
|
bsnRadiusAccServerIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..17)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying each RADIUS
|
|
Accounting server with which this client
|
|
communicates."
|
|
::= { bsnRadiusAccServerEntry 1 }
|
|
|
|
bsnRadiusAccServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the RADIUS accounting server
|
|
referred to in this table entry."
|
|
::= { bsnRadiusAccServerEntry 2 }
|
|
|
|
bsnRadiusAccClientServerPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP port the client is using to send requests to
|
|
this server."
|
|
::= { bsnRadiusAccServerEntry 3 }
|
|
|
|
bsnRadiusAccServerKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication and encryption key shared between
|
|
the Radius client and this Radius Server.
|
|
When the bsnRadiusAccServerKeyFormat is hex it
|
|
can have max length of 128 bytes. If the
|
|
bsnRadiusAccServerKeyFormat is Ascii it can have
|
|
max length of 64 bytes."
|
|
DEFVAL { "" }
|
|
::= { bsnRadiusAccServerEntry 4 }
|
|
|
|
bsnRadiusAccServerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Server enable or disable status."
|
|
::= { bsnRadiusAccServerEntry 5 }
|
|
|
|
bsnRadiusAccServerKeyFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hex(1),
|
|
ascii(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the server key. When hex, the number of
|
|
characters in the key should be even."
|
|
::= { bsnRadiusAccServerEntry 6 }
|
|
|
|
bsnRadiusAccServerIPSec OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPSec over RADIUS"
|
|
DEFVAL { disable }
|
|
::= { bsnRadiusAccServerEntry 7 }
|
|
|
|
bsnRadiusAccServerIPSecAuth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
hmacMd5(1),
|
|
hmacSha1(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Hash algorithm employed by the IPSec Encrpytion.
|
|
This applies only when bsnRadiusAccServerIPSec is in
|
|
enable state."
|
|
DEFVAL { hmacSha1 }
|
|
::= { bsnRadiusAccServerEntry 8 }
|
|
|
|
bsnRadiusAccServerIPSecEncryption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
des(1),
|
|
tripleDes(2),
|
|
aesCbc(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Encryption algorithm employed by this IpSec
|
|
Encryption. This applies only when
|
|
bsnRadiusAccServerIPSec is in enable state."
|
|
DEFVAL { tripleDes }
|
|
::= { bsnRadiusAccServerEntry 9 }
|
|
|
|
bsnRadiusAccServerIPSecIKEPhase1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
main(1),
|
|
agressive(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPN IKE Phase 1 Mode type as per the IpSec standards.
|
|
This applies only when bsnRadiusAccServerIPSec is in
|
|
enable state."
|
|
DEFVAL { main }
|
|
::= { bsnRadiusAccServerEntry 10 }
|
|
|
|
bsnRadiusAccServerIPSecIKELifetime OBJECT-TYPE
|
|
SYNTAX Integer32 (1800..345600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPSec IKE's Lifetime.
|
|
This applies only when bsnRadiusAccServerIPSec is in
|
|
enable state."
|
|
DEFVAL { 28800 }
|
|
::= { bsnRadiusAccServerEntry 11 }
|
|
|
|
bsnRadiusAccServerIPSecDHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
group1(1),
|
|
group2(2),
|
|
group5(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IKE's Diffie-Hellman Group.
|
|
This applies only when bsnRadiusAccServerIPSec is in
|
|
enable state."
|
|
DEFVAL { group2 }
|
|
::= { bsnRadiusAccServerEntry 12 }
|
|
|
|
bsnRadiusAccServerNetworkUserConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, this entry is considered as network user
|
|
radius accounting server entry."
|
|
::= { bsnRadiusAccServerEntry 13 }
|
|
|
|
bsnRadiusAccServerRetransmitTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (2..30)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time in seconds after which a radius accounting request
|
|
will timeout and a retransmission will be taken up by
|
|
the switch."
|
|
::= { bsnRadiusAccServerEntry 14 }
|
|
|
|
bsnRadiusAccServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for creation/deletion"
|
|
::= { bsnRadiusAccServerEntry 26 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Begin of bsnRadiusAuthServerStatsTable
|
|
-- *******************************************************************
|
|
|
|
bsnRadiusAuthServerStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnRadiusAuthServerStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The listing the Statistics of RADIUS authentication
|
|
servers."
|
|
::= { bsnAAA 3 }
|
|
|
|
bsnRadiusAuthServerStatsEntry OBJECT-TYPE
|
|
SYNTAX BsnRadiusAuthServerStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing statistics a RADIUS
|
|
authentication server with which the client shares
|
|
a secret."
|
|
INDEX { bsnRadiusAuthServerIndex }
|
|
::= { bsnRadiusAuthServerStatsTable 1 }
|
|
|
|
BsnRadiusAuthServerStatsEntry ::= SEQUENCE {
|
|
bsnRadiusAuthClientRoundTripTime TimeTicks,
|
|
bsnRadiusAuthClientAccessRequests Counter32,
|
|
bsnRadiusAuthClientAccessRetransmissions Counter32,
|
|
bsnRadiusAuthClientAccessAccepts Counter32,
|
|
bsnRadiusAuthClientAccessRejects Counter32,
|
|
bsnRadiusAuthClientAccessChallenges Counter32,
|
|
bsnRadiusAuthClientMalformedAccessResponses Counter32,
|
|
bsnRadiusAuthClientBadAuthenticators Counter32,
|
|
bsnRadiusAuthClientPendingRequests Gauge32,
|
|
bsnRadiusAuthClientTimeouts Counter32,
|
|
bsnRadiusAuthClientUnknownTypes Counter32,
|
|
bsnRadiusAuthClientPacketsDropped Counter32
|
|
}
|
|
|
|
bsnRadiusAuthClientRoundTripTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval (in hundredths of a second) between
|
|
the most recent Access-Reply/Access-Challenge and the
|
|
Access-Request that matched it from this RADIUS
|
|
authentication server."
|
|
::= { bsnRadiusAuthServerStatsEntry 6 }
|
|
|
|
-- *************************************************************
|
|
-- Request/Response statistics
|
|
--
|
|
-- TotalIncomingPackets = Accepts + Rejects + Challenges + UnknownTypes
|
|
--
|
|
-- TotalIncomingPackets - MalformedResponses - BadAuthenticators -
|
|
-- UnknownTypes - PacketsDropped = Successfully received
|
|
--
|
|
-- AccessRequests + PendingRequests + ClientTimeouts =
|
|
-- Successfully Received
|
|
-- *************************************************************
|
|
|
|
bsnRadiusAuthClientAccessRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Request packets sent
|
|
to this server. This does not include retransmissions."
|
|
::= { bsnRadiusAuthServerStatsEntry 7 }
|
|
|
|
bsnRadiusAuthClientAccessRetransmissions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Request packets
|
|
retransmitted to this RADIUS authentication server."
|
|
::= { bsnRadiusAuthServerStatsEntry 8 }
|
|
|
|
bsnRadiusAuthClientAccessAccepts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Accept packets
|
|
(valid or invalid) received from this server."
|
|
::= { bsnRadiusAuthServerStatsEntry 9 }
|
|
|
|
bsnRadiusAuthClientAccessRejects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Reject packets
|
|
(valid or invalid) received from this server."
|
|
::= { bsnRadiusAuthServerStatsEntry 10 }
|
|
|
|
bsnRadiusAuthClientAccessChallenges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Challenge packets
|
|
(valid or invalid) received from this server."
|
|
::= { bsnRadiusAuthServerStatsEntry 11 }
|
|
|
|
-- "Access-Response" includes an Access-Accept, Access-Challenge
|
|
-- or Access-Reject
|
|
|
|
bsnRadiusAuthClientMalformedAccessResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of malformed RADIUS Access-Response
|
|
packets received from this server.
|
|
Malformed packets include packets with
|
|
an invalid length. Bad authenticators or
|
|
Signature attributes or unknown types are not
|
|
included as malformed access responses."
|
|
::= { bsnRadiusAuthServerStatsEntry 12 }
|
|
|
|
bsnRadiusAuthClientBadAuthenticators OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Response packets
|
|
containing invalid authenticators or Signature
|
|
attributes received from this server."
|
|
::= { bsnRadiusAuthServerStatsEntry 13 }
|
|
|
|
bsnRadiusAuthClientPendingRequests OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Request packets
|
|
destined for this server that have not yet timed out
|
|
or received a response. This variable is incremented
|
|
when an Access-Request is sent and decremented due to
|
|
receipt of an Acess-Accept, Access-Reject or
|
|
Access-Challenge, a timeout or retransmission."
|
|
::= { bsnRadiusAuthServerStatsEntry 14 }
|
|
|
|
bsnRadiusAuthClientTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of authentication timeouts to this server.
|
|
After a timeout the client may retry to the same
|
|
server, send to a different server, or
|
|
give up. A retry to the same server is counted as a
|
|
retransmit as well as a timeout. A send to a different
|
|
server is counted as a Request as well as a timeout."
|
|
::= { bsnRadiusAuthServerStatsEntry 15 }
|
|
|
|
bsnRadiusAuthClientUnknownTypes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets of unknown type which
|
|
were received from this server on the authentication port."
|
|
::= { bsnRadiusAuthServerStatsEntry 16 }
|
|
|
|
bsnRadiusAuthClientPacketsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets of which were
|
|
received from this server on the authentication port
|
|
and dropped for some other reason."
|
|
::= { bsnRadiusAuthServerStatsEntry 36 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Begin of bsnRadiusAccServerStatsTable
|
|
-- *******************************************************************
|
|
|
|
bsnRadiusAccServerStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnRadiusAccServerStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the RADIUS accounting
|
|
servers with which the client shares a secret."
|
|
::= { bsnAAA 4 }
|
|
|
|
bsnRadiusAccServerStatsEntry OBJECT-TYPE
|
|
SYNTAX BsnRadiusAccServerStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing a RADIUS
|
|
accounting server with which the client shares a secret."
|
|
INDEX { bsnRadiusAccServerIndex }
|
|
::= { bsnRadiusAccServerStatsTable 1 }
|
|
|
|
BsnRadiusAccServerStatsEntry ::= SEQUENCE {
|
|
bsnRadiusAccClientRoundTripTime TimeTicks,
|
|
bsnRadiusAccClientRequests Counter32,
|
|
bsnRadiusAccClientRetransmissions Counter32,
|
|
bsnRadiusAccClientResponses Counter32,
|
|
bsnRadiusAccClientMalformedResponses Counter32,
|
|
bsnRadiusAccClientBadAuthenticators Counter32,
|
|
bsnRadiusAccClientPendingRequests Gauge32,
|
|
bsnRadiusAccClientTimeouts Counter32,
|
|
bsnRadiusAccClientUnknownTypes Counter32,
|
|
bsnRadiusAccClientPacketsDropped Counter32
|
|
}
|
|
|
|
bsnRadiusAccClientRoundTripTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between the most recent
|
|
Accounting-Response and the Accounting-Request that
|
|
matched it from this RADIUS accounting server."
|
|
::= { bsnRadiusAccServerStatsEntry 6 }
|
|
|
|
-- *************************************************************
|
|
-- Request/Response statistics
|
|
--
|
|
-- Requests = Responses + PendingRequests + ClientTimeouts
|
|
--
|
|
-- Responses - MalformedResponses - BadAuthenticators -
|
|
-- UnknownTypes - PacketsDropped = Successfully received
|
|
-- *************************************************************
|
|
|
|
bsnRadiusAccClientRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Accounting-Request packets
|
|
sent. This does not include retransmissions."
|
|
::= { bsnRadiusAccServerStatsEntry 7 }
|
|
|
|
bsnRadiusAccClientRetransmissions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Accounting-Request packets
|
|
retransmitted to this RADIUS accounting server.
|
|
Retransmissions include retries where the
|
|
Identifier and Acct-Delay have been updated, as
|
|
well as those in which they remain the same."
|
|
::= { bsnRadiusAccServerStatsEntry 8 }
|
|
|
|
bsnRadiusAccClientResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets received on the
|
|
accounting port from this server."
|
|
::= { bsnRadiusAccServerStatsEntry 9 }
|
|
|
|
bsnRadiusAccClientMalformedResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of malformed RADIUS Accounting-Response
|
|
packets received from this server. Malformed packets
|
|
include packets with an invalid length. Bad
|
|
authenticators and unknown types are not included as
|
|
malformed accounting responses."
|
|
::= { bsnRadiusAccServerStatsEntry 10 }
|
|
|
|
bsnRadiusAccClientBadAuthenticators OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Accounting-Response
|
|
packets which contained invalid authenticators
|
|
received from this server."
|
|
::= { bsnRadiusAccServerStatsEntry 11 }
|
|
|
|
bsnRadiusAccClientPendingRequests OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Accounting-Request packets
|
|
sent to this server that have not yet timed out or
|
|
received a response. This variable is incremented when an
|
|
Accounting-Request is sent and decremented due to
|
|
receipt of an Accounting-Response, a timeout or
|
|
a retransmission."
|
|
::= { bsnRadiusAccServerStatsEntry 12 }
|
|
|
|
bsnRadiusAccClientTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of accounting timeouts to this server.
|
|
After a timeout the client may retry to the same
|
|
server, send to a different server, or give up.
|
|
A retry to the same server is counted as a
|
|
retransmit as well as a timeout. A send to a different
|
|
server is counted as an Accounting-Request as well as
|
|
a timeout."
|
|
::= { bsnRadiusAccServerStatsEntry 13 }
|
|
|
|
bsnRadiusAccClientUnknownTypes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets of unknown type which
|
|
were received from this server on the accounting port."
|
|
::= { bsnRadiusAccServerStatsEntry 14 }
|
|
|
|
bsnRadiusAccClientPacketsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets which were received from
|
|
this server on the accounting port and dropped for some
|
|
other reason."
|
|
::= { bsnRadiusAccServerStatsEntry 34 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- bsnUsersTable
|
|
-- *******************************************************************
|
|
|
|
bsnUsersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnUsersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The (conceptual) table listing Wlan Users"
|
|
::= { bsnAAA 5 }
|
|
|
|
bsnUsersEntry OBJECT-TYPE
|
|
SYNTAX BsnUsersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX { bsnUserName }
|
|
::= { bsnUsersTable 1 }
|
|
|
|
BsnUsersEntry ::= SEQUENCE {
|
|
bsnUserName OCTET STRING,
|
|
bsnUserPassword OCTET STRING,
|
|
bsnUserEssIndex INTEGER,
|
|
bsnUserAccessMode INTEGER,
|
|
bsnUserType INTEGER,
|
|
bsnUserInterfaceName OCTET STRING,
|
|
bsnUserRowStatus RowStatus
|
|
}
|
|
|
|
bsnUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..24))
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"User Name"
|
|
::= { bsnUsersEntry 2 }
|
|
|
|
bsnUserPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..24))
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"User Password"
|
|
::= { bsnUsersEntry 3 }
|
|
|
|
bsnUserEssIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..517)
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"User WLAN ID. Value 0 implies that this applies to any
|
|
WLAN ID."
|
|
::= { bsnUsersEntry 4 }
|
|
|
|
bsnUserAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readOnly(1),
|
|
readWrite(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"User Access Mode."
|
|
::= { bsnUsersEntry 5 }
|
|
|
|
bsnUserType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
management(1),
|
|
wlan(2),
|
|
macFilter(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"User Type."
|
|
::= { bsnUsersEntry 6 }
|
|
|
|
bsnUserInterfaceName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Interface Name."
|
|
::= { bsnUsersEntry 7 }
|
|
|
|
bsnUserRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnUsersEntry 26 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- bsnMacFilterTable
|
|
-- *******************************************************************
|
|
|
|
bsnMacFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing MAC Filter entries"
|
|
::= { bsnAAA 9 }
|
|
|
|
bsnMacFilterEntry OBJECT-TYPE
|
|
SYNTAX BsnMacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX { bsnMacFilterAddress }
|
|
::= { bsnMacFilterTable 1 }
|
|
|
|
BsnMacFilterEntry ::= SEQUENCE {
|
|
bsnMacFilterAddress OCTET STRING,
|
|
bsnMacFilterWlanId INTEGER,
|
|
bsnMacFilterInterfaceName OCTET STRING,
|
|
bsnMacFilterDescription OCTET STRING,
|
|
bsnMacFilterRowStatus RowStatus
|
|
}
|
|
|
|
bsnMacFilterAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..24))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of the entry"
|
|
::= { bsnMacFilterEntry 1 }
|
|
|
|
bsnMacFilterWlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..517)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WLAN ID of the WLAN that the user can connect to. 0
|
|
means any WLAN ID."
|
|
::= { bsnMacFilterEntry 2 }
|
|
|
|
bsnMacFilterInterfaceName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface Name."
|
|
::= { bsnMacFilterEntry 3 }
|
|
|
|
bsnMacFilterDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description of the MAC Filter entry."
|
|
::= { bsnMacFilterEntry 4 }
|
|
|
|
bsnMacFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnMacFilterEntry 24 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- bsnLocalNetUserTable
|
|
-- *******************************************************************
|
|
|
|
bsnLocalNetUserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnLocalNetUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing Local Net User entries."
|
|
::= { bsnAAA 10 }
|
|
|
|
bsnLocalNetUserEntry OBJECT-TYPE
|
|
SYNTAX BsnLocalNetUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX { bsnLocalNetUserName }
|
|
::= { bsnLocalNetUserTable 1 }
|
|
|
|
BsnLocalNetUserEntry ::= SEQUENCE {
|
|
bsnLocalNetUserName OCTET STRING,
|
|
bsnLocalNetUserWlanId INTEGER,
|
|
bsnLocalNetUserPassword OCTET STRING,
|
|
bsnLocalNetUserDescription OCTET STRING,
|
|
bsnLocalNetUserLifetime TimeInterval,
|
|
bsnLocalNetUserStartTime TimeTicks,
|
|
bsnLocalNetUserRemainingTime TimeInterval,
|
|
bsnLocalNetUserRowStatus RowStatus
|
|
}
|
|
|
|
bsnLocalNetUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..24))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the net user."
|
|
::= { bsnLocalNetUserEntry 1 }
|
|
|
|
bsnLocalNetUserWlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..517)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WLAN ID of the WLAN that the user can connect to. 0
|
|
means any WLAN ID."
|
|
::= { bsnLocalNetUserEntry 2 }
|
|
|
|
bsnLocalNetUserPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..24))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Password."
|
|
::= { bsnLocalNetUserEntry 3 }
|
|
|
|
bsnLocalNetUserDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description of the Net User entry."
|
|
::= { bsnLocalNetUserEntry 4 }
|
|
|
|
bsnLocalNetUserLifetime OBJECT-TYPE
|
|
SYNTAX TimeInterval (0 | 6000..259200000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the lifetime of an
|
|
user account expressed in hundredths of a second.
|
|
|
|
Lifetime period other than 0 will make it a guest-user.
|
|
Minimum value for guest user is 60 seconds (6000).
|
|
|
|
Once configured as non-guest user can not be change
|
|
to guest user and vice-versa. Default value is for
|
|
a day and max lifetime is 259200000(30 days). WLANIds,
|
|
which have webauth policy are valid for guest access
|
|
user."
|
|
DEFVAL { 8640000 }
|
|
::= { bsnLocalNetUserEntry 5 }
|
|
|
|
bsnLocalNetUserStartTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time when the guest user
|
|
account was created and expressed as the number of
|
|
seconds elapsed since 1st Jan, 1970."
|
|
::= { bsnLocalNetUserEntry 6 }
|
|
|
|
bsnLocalNetUserRemainingTime OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the remaining session time
|
|
for the guest user in hundredths of a second."
|
|
::= { bsnLocalNetUserEntry 7 }
|
|
|
|
bsnLocalNetUserRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnLocalNetUserEntry 24 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- bsnLocalManagementUserTable
|
|
-- *******************************************************************
|
|
|
|
bsnLocalManagementUserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnLocalManagementUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing Local Management Users"
|
|
::= { bsnAAA 11 }
|
|
|
|
bsnLocalManagementUserEntry OBJECT-TYPE
|
|
SYNTAX BsnLocalManagementUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX { bsnLocalManagementUserName }
|
|
::= { bsnLocalManagementUserTable 1 }
|
|
|
|
BsnLocalManagementUserEntry ::= SEQUENCE {
|
|
bsnLocalManagementUserName OCTET STRING,
|
|
bsnLocalManagementUserPassword OCTET STRING,
|
|
bsnLocalManagementUserAccessMode INTEGER,
|
|
bsnLocalManagementUserRowStatus RowStatus
|
|
}
|
|
|
|
bsnLocalManagementUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..24))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Name"
|
|
::= { bsnLocalManagementUserEntry 1 }
|
|
|
|
bsnLocalManagementUserPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..24))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Password"
|
|
::= { bsnLocalManagementUserEntry 2 }
|
|
|
|
bsnLocalManagementUserAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readOnly(1),
|
|
readWrite(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Access Mode."
|
|
::= { bsnLocalManagementUserEntry 3 }
|
|
|
|
bsnLocalManagementUserRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnLocalManagementUserEntry 23 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- bsnAclTable
|
|
-- *******************************************************************
|
|
|
|
bsnAclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing ACLs (Access Control Lists) on the
|
|
Switch."
|
|
::= { bsnAAA 7 }
|
|
|
|
bsnAclEntry OBJECT-TYPE
|
|
SYNTAX BsnAclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX { bsnAclName }
|
|
::= { bsnAclTable 1 }
|
|
|
|
BsnAclEntry ::= SEQUENCE {
|
|
bsnAclName OCTET STRING,
|
|
bsnAclApplyMode INTEGER,
|
|
bsnAclRowStatus RowStatus
|
|
}
|
|
|
|
bsnAclName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Access Control List."
|
|
::= { bsnAclEntry 1 }
|
|
|
|
bsnAclApplyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notapplied(0),
|
|
applied(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The apply mode of the ACL on the switch. Mode value
|
|
'applied' means the ACL has been applied on the switch."
|
|
::= { bsnAclEntry 2 }
|
|
|
|
bsnAclRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status of the ACL."
|
|
::= { bsnAclEntry 20 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- bsnAclRuleTable
|
|
-- *******************************************************************
|
|
|
|
bsnAclRuleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAclRuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing Acl Rules(Access Control List Entries)
|
|
on the ACL with name bsnAclName."
|
|
::= { bsnAAA 8 }
|
|
|
|
bsnAclRuleEntry OBJECT-TYPE
|
|
SYNTAX BsnAclRuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX {
|
|
bsnAclName,
|
|
bsnAclRuleIndex
|
|
}
|
|
::= { bsnAclRuleTable 1 }
|
|
|
|
BsnAclRuleEntry ::= SEQUENCE {
|
|
bsnAclRuleIndex Unsigned32,
|
|
bsnAclRuleAction INTEGER,
|
|
bsnAclRuleDirection INTEGER,
|
|
bsnAclRuleSourceIpAddress IpAddress,
|
|
bsnAclRuleSourceIpNetmask IpAddress,
|
|
bsnAclRuleDestinationIpAddress IpAddress,
|
|
bsnAclRuleDestinationIpNetmask IpAddress,
|
|
bsnAclRuleProtocol Unsigned32,
|
|
bsnAclRuleStartSourcePort Unsigned32,
|
|
bsnAclRuleEndSourcePort Unsigned32,
|
|
bsnAclRuleStartDestinationPort Unsigned32,
|
|
bsnAclRuleEndDestinationPort Unsigned32,
|
|
bsnAclRuleDscp Unsigned32,
|
|
bsnAclNewRuleIndex Unsigned32,
|
|
bsnAclRuleRowStatus RowStatus
|
|
}
|
|
|
|
bsnAclRuleIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..64)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the ACL rule. This can be updated to reset the
|
|
sequence of the rules of an ACL."
|
|
::= { bsnAclRuleEntry 2 }
|
|
|
|
bsnAclRuleAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The permission mode of a rule."
|
|
DEFVAL { deny }
|
|
::= { bsnAclRuleEntry 3 }
|
|
|
|
bsnAclRuleDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inbound(0),
|
|
outbound(1),
|
|
any(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction of the packet to which the rule may be
|
|
applied."
|
|
DEFVAL { any }
|
|
::= { bsnAclRuleEntry 4 }
|
|
|
|
bsnAclRuleSourceIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source IP Address of the ACL rule. A value 0 implies
|
|
any source address."
|
|
DEFVAL { '00000000'H }
|
|
::= { bsnAclRuleEntry 5 }
|
|
|
|
bsnAclRuleSourceIpNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source IP Netmask of the ACL rule. A value 0
|
|
implies any source mask."
|
|
DEFVAL { '00000000'H }
|
|
::= { bsnAclRuleEntry 6 }
|
|
|
|
bsnAclRuleDestinationIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination IP Address of the ACL rule. A value 0
|
|
implies any destination address."
|
|
DEFVAL { '00000000'H }
|
|
::= { bsnAclRuleEntry 7 }
|
|
|
|
bsnAclRuleDestinationIpNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination Netmask of the ACL rule. A value 0
|
|
implies any destination mask."
|
|
DEFVAL { '00000000'H }
|
|
::= { bsnAclRuleEntry 8 }
|
|
|
|
bsnAclRuleProtocol OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protocol of the packet. It can be either of the pre
|
|
specified protocols like TCP, UDP, ICMP, ESP, AH, GRE,
|
|
IP, Ethernet Over IP, OSPF or any number between 0
|
|
and 255. A value 256 implies that this rule applies
|
|
to 'Any' protocol."
|
|
DEFVAL { 256 }
|
|
::= { bsnAclRuleEntry 9 }
|
|
|
|
bsnAclRuleStartSourcePort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Port of the packet. It can be either of the
|
|
pre specified ports like HTTP, HTTPS, Telnet, RADIUS
|
|
etc or any number between 0 and 65535. A value 65536
|
|
implies that this rule applies to 'Any' source port.
|
|
This value can be set only if the protocol is set to
|
|
TCP or UDP. Otherwise the value is set to Any(65536)"
|
|
DEFVAL { 0 }
|
|
::= { bsnAclRuleEntry 10 }
|
|
|
|
bsnAclRuleEndSourcePort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Port of the packet. It can be either of the
|
|
pre specified ports like HTTP, HTTPS, Telnet, RADIUS
|
|
etc or any number between 0 and 65535.
|
|
A value 65536 implies that this rule applies to 'Any'
|
|
source port. This value can be set only if the
|
|
protocol is set to TCP or UDP.
|
|
Otherwise the value is set to Any(65536)"
|
|
DEFVAL { 65535 }
|
|
::= { bsnAclRuleEntry 11 }
|
|
|
|
bsnAclRuleStartDestinationPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination Port of the packet. It can be either of
|
|
the pre specified ports like HTTP, HTTPS, Telnet,
|
|
RADIUS etc or any number between 0 and 65535.
|
|
A value 65536 implies that this rule aplpies to 'Any'
|
|
Destination port. This value can be set only if the
|
|
protocol is set to TCP or UDP. Otherwise the value is
|
|
set to Any(65536)"
|
|
DEFVAL { 0 }
|
|
::= { bsnAclRuleEntry 12 }
|
|
|
|
bsnAclRuleEndDestinationPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination Port of the packet. It can be either of
|
|
the pre specified ports like HTTP, HTTPS, Telnet,
|
|
RADIUS etc or any number between 0 and 65535.
|
|
A value 65536 implies that this rule aplpies to 'Any'
|
|
Destination port. This value can be set only if the
|
|
protocol is set to TCP or UDP. Otherwise the value is
|
|
set to Any(65536)"
|
|
DEFVAL { 65535 }
|
|
::= { bsnAclRuleEntry 13 }
|
|
|
|
bsnAclRuleDscp OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP value of the rule. A value 256 implies Any"
|
|
DEFVAL { 256 }
|
|
::= { bsnAclRuleEntry 14 }
|
|
|
|
bsnAclNewRuleIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..64)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"New Index of the ACL rule. This attribute should be
|
|
updated if the requirement is to reset the sequence of
|
|
the rules of an ACL. A read on this will not yield
|
|
anything."
|
|
::= { bsnAclRuleEntry 15 }
|
|
|
|
bsnAclRuleRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status of the ACL Rule."
|
|
::= { bsnAclRuleEntry 40 }
|
|
|
|
|
|
|
|
-- *******************************************************************
|
|
-- bsnAAA common attributes
|
|
-- *******************************************************************
|
|
|
|
bsnRadiusAuthKeyWrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When keyWrap is enable then for 801.1X and 802.11i
|
|
client Authentication, request is sent to those
|
|
radius servers which has KEK and MACK keys are configured.
|
|
|
|
Radius servers are widely used for user authentications.
|
|
In 802.11i and 802.1X type authentication, the controller
|
|
recives Pairwise Master KEy(PMK) from RADIUS sever using
|
|
vendor specific RADIUS attributes, which uses MPPE RFC3078.
|
|
Since MPPE uses RC4 algorithm to provide data
|
|
confidentiality, it is not FIPS approved. For this RADIUS
|
|
key WRAP attributes, bsnRadiusAuthServerKeyWrap
|
|
and bsnRadiusAuthServerKeyWrapMACKkey have been added,
|
|
which are used to securely transfer encryption keys using
|
|
non-proprietary techniques."
|
|
DEFVAL { false }
|
|
::= { bsnAAA 12 }
|
|
|
|
bsnRadiusAuthCacheCredentialsLocally OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Enable or disable caching of credentials locally for
|
|
RADIUS Auth servers. This is used when a client uses a
|
|
one time password authentication scheme."
|
|
::= { bsnAAA 14 }
|
|
|
|
bsnAAAMacDelimiter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noDelimiter(0),
|
|
colon(1),
|
|
hyphen(2),
|
|
singleHyphen(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delimiter to be used for mac filtering. It can be
|
|
colon as in xx:xx:xx:xx:xx:xx or hyphen as in
|
|
xx-xx-xx-xx-xx-xx or single hyphen as in
|
|
xxxxxx-xxxxxx or no delimiter as in xxxxxxxxxxxx."
|
|
::= { bsnAAA 15 }
|
|
|
|
bsnAAARadiusCompatibilityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ciscoACS(0),
|
|
orinocoRadius(1),
|
|
other(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The required compatibility mode for MAC filtering. For
|
|
ciscoACS, the expected MAC delimiter setting is colon and
|
|
for orinocoRadius, it is singleHyphen."
|
|
::= { bsnAAA 16 }
|
|
|
|
bsnAAARadiusCallStationIdType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipAddr(0),
|
|
macAddr(1),
|
|
apMacAddress(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute configures the call station ID information
|
|
sent in RADIUS messages. The value undefined cannot be
|
|
set during the write operation."
|
|
::= { bsnAAA 17 }
|
|
|
|
bsnAAALocalDatabaseSize OBJECT-TYPE
|
|
SYNTAX Integer32 (512..2048)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is the total number of entries permitted
|
|
in the local users database. This is the combined total
|
|
of entries for Local Management Users, Local Net Users,
|
|
Disabled Clients (previously known as blacklistclients
|
|
and the MAC Filters. If the database size limit is
|
|
reached, no more entries in any of these user lists are
|
|
allowed to be created. To continue creating more entries,
|
|
one should increase the size of the database. This value
|
|
is applied on reboot and then matches the
|
|
bsnAACurrentLocalDatabaseSize."
|
|
::= { bsnAAA 20 }
|
|
|
|
bsnAAACurrentLocalDatabaseSize OBJECT-TYPE
|
|
SYNTAX Integer32 (512..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is the maximum number of entries in the
|
|
local users database that is effective currently.
|
|
This is the combined total of entries for Local
|
|
Management Users, Local Net Users, Disabled Clients
|
|
(previously known as blacklist clients) and the MAC
|
|
Filters."
|
|
::= { bsnAAA 21 }
|
|
-- *******************************************************************
|
|
-- bsnBlackListClientTable
|
|
-- *******************************************************************
|
|
|
|
bsnBlackListClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnBlackListClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing Wlan Black Listed Clients"
|
|
::= { bsnAAA 6 }
|
|
|
|
bsnBlackListClientEntry OBJECT-TYPE
|
|
SYNTAX BsnBlackListClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"...."
|
|
INDEX { bsnBlackListClientMacAddress }
|
|
::= { bsnBlackListClientTable 1 }
|
|
|
|
BsnBlackListClientEntry ::= SEQUENCE {
|
|
bsnBlackListClientMacAddress OCTET STRING,
|
|
bsnBlackListClientDescription OCTET STRING,
|
|
bsnBlackListClientRowStatus RowStatus
|
|
}
|
|
|
|
bsnBlackListClientMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..12))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Black Listed Client MAC Address"
|
|
::= { bsnBlackListClientEntry 1 }
|
|
|
|
bsnBlackListClientDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Black Listed Client Description"
|
|
::= { bsnBlackListClientEntry 2 }
|
|
|
|
bsnBlackListClientRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnBlackListClientEntry 22 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- * Begin of bsnExternalPolicyServerTable
|
|
-- *******************************************************************
|
|
|
|
bsnExternalPolicyServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnExternalPolicyServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the External Policy
|
|
servers with which client share a secret."
|
|
::= { bsnAAA 19 }
|
|
|
|
bsnExternalPolicyServerEntry OBJECT-TYPE
|
|
SYNTAX BsnExternalPolicyServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing an External
|
|
policy server with which the client shares
|
|
a secret."
|
|
INDEX { bsnExternalPolicyServerIndex }
|
|
::= { bsnExternalPolicyServerTable 1 }
|
|
|
|
BsnExternalPolicyServerEntry ::= SEQUENCE {
|
|
bsnExternalPolicyServerIndex Integer32,
|
|
bsnExternalPolicyServerAddress IpAddress,
|
|
bsnExternalPolicyServerPortNumber Integer32,
|
|
bsnExternalPolicyServerKey OCTET STRING,
|
|
bsnExternalPolicyServerAdminStatus INTEGER,
|
|
bsnExternalPolicyServerConnectionStatus INTEGER,
|
|
bsnExternalPolicyServerRowStatus RowStatus
|
|
}
|
|
|
|
bsnExternalPolicyServerIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A number uniquely identifying each External
|
|
Policy server with which this client
|
|
communicates."
|
|
::= { bsnExternalPolicyServerEntry 1 }
|
|
|
|
bsnExternalPolicyServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The IP address of the External Policy server
|
|
referred to in this table entry."
|
|
::= { bsnExternalPolicyServerEntry 2 }
|
|
|
|
bsnExternalPolicyServerPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The UDP port the client is using to send requests to
|
|
this server."
|
|
::= { bsnExternalPolicyServerEntry 3 }
|
|
|
|
bsnExternalPolicyServerKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The authentication and encryption key shared between
|
|
the client and this External Policy Server."
|
|
DEFVAL { "" }
|
|
::= { bsnExternalPolicyServerEntry 4 }
|
|
|
|
bsnExternalPolicyServerAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Server enable or disable status."
|
|
::= { bsnExternalPolicyServerEntry 5 }
|
|
|
|
bsnExternalPolicyServerConnectionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disconnected(0),
|
|
connected(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Server enable or disable status."
|
|
::= { bsnExternalPolicyServerEntry 6 }
|
|
|
|
bsnExternalPolicyServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Row Status for creation/deletion"
|
|
::= { bsnExternalPolicyServerEntry 26 }
|
|
|
|
|
|
|
|
bsnExternalPolicyServerAclName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute configures the ACL Name for External
|
|
Policy Servers"
|
|
::= { bsnAAA 18 }
|
|
|
|
bsnAcceptSelfSignedCertificate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag specifies if controller will accept Self Signed
|
|
Certificate from AP as part of authorization."
|
|
::= { bsnGlobalDot11Config 48 }
|
|
|
|
bsnSystemClockTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current clock time
|
|
of the controller and expressed as the number of
|
|
seconds elapsed since 00:00:00 on
|
|
January 1, 1970, Coordinated Universal Time (UTC)."
|
|
::= { bsnGlobalDot11Config 49 }
|
|
-- *******************************************************************
|
|
-- bsnAPAuthorizationTable
|
|
-- *******************************************************************
|
|
|
|
bsnAPAuthorizationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPAuthorizationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table listing AP Authorization entries"
|
|
::= { bsnAAA 22 }
|
|
|
|
bsnAPAuthorizationEntry OBJECT-TYPE
|
|
SYNTAX BsnAPAuthorizationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BsnAPAuthorizationEntry"
|
|
INDEX { bsnAPAuthMacAddress }
|
|
::= { bsnAPAuthorizationTable 1 }
|
|
|
|
BsnAPAuthorizationEntry ::= SEQUENCE {
|
|
bsnAPAuthMacAddress OCTET STRING,
|
|
bsnAPAuthCertificateType INTEGER,
|
|
bsnAPAuthHashKey OCTET STRING,
|
|
bsnAPAuthRowStatus RowStatus
|
|
}
|
|
|
|
bsnAPAuthMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..24))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of the AP entry"
|
|
::= { bsnAPAuthorizationEntry 1 }
|
|
|
|
bsnAPAuthCertificateType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
mic(1),
|
|
ssc(2),
|
|
locMic(3),
|
|
locSsc(4),
|
|
none(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supported certificate types are MIC, SSC
|
|
(Self-Signed-Certificate) or no certificate."
|
|
::= { bsnAPAuthorizationEntry 2 }
|
|
|
|
bsnAPAuthHashKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SHA1 hash key for SSC certificate validation.
|
|
It has to be 40 hexa-decimal characters.
|
|
This is considered when certificate type is SSC."
|
|
::= { bsnAPAuthorizationEntry 3 }
|
|
|
|
bsnAPAuthRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnAPAuthorizationEntry 20 }
|
|
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnWrasIKECertTable
|
|
-- ********************************************************************
|
|
|
|
bsnWrasIpsecCACertificate OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..4096))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
DEFVAL { "" }
|
|
::= { bsnIpsec 1 }
|
|
|
|
bsnWrasIpsecCACertificateUpdate OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..4096))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Note this attribute is for updating the certificate
|
|
If you try to read it, it will always be ***"
|
|
DEFVAL { "" }
|
|
::= { bsnIpsec 2 }
|
|
|
|
bsnWrasIpsecCertTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnWrasIpsecCertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Certificates."
|
|
::= { bsnIpsec 3 }
|
|
|
|
bsnWrasIpsecCertEntry OBJECT-TYPE
|
|
SYNTAX BsnWrasIpsecCertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains a specific certificate."
|
|
INDEX { bsnWrasIpsecCertName }
|
|
::= { bsnWrasIpsecCertTable 1 }
|
|
|
|
BsnWrasIpsecCertEntry ::= SEQUENCE {
|
|
bsnWrasIpsecCertName DisplayString,
|
|
bsnWrasIpsecCertificateUpdate OCTET STRING,
|
|
bsnWrasIpsecCertificate OCTET STRING,
|
|
bsnWrasIpsecCertPassword OCTET STRING,
|
|
bsnWrasIpsecCertStatus RowStatus
|
|
}
|
|
|
|
bsnWrasIpsecCertName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name assigned to this set of IKE Certificates."
|
|
::= { bsnWrasIpsecCertEntry 1 }
|
|
|
|
bsnWrasIpsecCertificateUpdate OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..4096))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If you try to read this it will always be ***"
|
|
DEFVAL { "" }
|
|
::= { bsnWrasIpsecCertEntry 2 }
|
|
|
|
bsnWrasIpsecCertificate OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..4096))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
DEFVAL { "" }
|
|
::= { bsnWrasIpsecCertEntry 3 }
|
|
|
|
bsnWrasIpsecCertPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..1500))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
DEFVAL { "" }
|
|
::= { bsnWrasIpsecCertEntry 4 }
|
|
|
|
bsnWrasIpsecCertStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row status type for the IKE Cert Entry."
|
|
::= { bsnWrasIpsecCertEntry 24 }
|
|
|
|
|
|
-- *************************************************************
|
|
-- bsnTrap Object Group
|
|
-- *************************************************************
|
|
--
|
|
-- *************************************************************
|
|
-- bsnTrapControl would specify all the objects that enable/disable the
|
|
-- the generation of traps by Airespace Switch
|
|
-- *************************************************************
|
|
|
|
bsnTrapControl OBJECT IDENTIFIER
|
|
::= { bsnTrap 1 }
|
|
|
|
bsnTrapVariable OBJECT IDENTIFIER
|
|
::= { bsnTrap 2 }
|
|
|
|
-- *************************************************************
|
|
-- bsnTraps would specify all the possible traps that Airespace Switch
|
|
-- would need to generate
|
|
-- *************************************************************
|
|
|
|
bsnTraps OBJECT IDENTIFIER
|
|
::= { bsnTrap 3 }
|
|
|
|
|
|
-- *************************************************************
|
|
-- Mobile Station related traps and trapControl
|
|
-- *************************************************************
|
|
|
|
bsnDot11StationTrapControlMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mask describes what events merit traps to network
|
|
management. If the bit for a particular event is turned on
|
|
then notification will be generated on event occurence.
|
|
Event corresponding value
|
|
----- -----------------
|
|
bsnDot11StationDisassociate 1
|
|
bsnDot11StationDeauthenticate 2
|
|
bsnDot11StationAuthenticateFail 4
|
|
bsnDot11StationAssociateFail 8
|
|
bsnDot11StationBlacklisted 16
|
|
bsnDot11StationAssociate 32
|
|
ciscoLwappDot11ClientMovedToRunState 64
|
|
By Default all bits are off."
|
|
DEFVAL { 0 }
|
|
::= { bsnTrapControl 1 }
|
|
|
|
bsnDot11StationDisassociate NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId,
|
|
bsnStationReasonCode,
|
|
bsnUserIpAddress,
|
|
bsnStationUserName,
|
|
bsnStationMacAddress,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The disassociate notification shall be sent when the Station
|
|
sends a Disassociation frame. The value of the notification
|
|
shall include the MAC address of the MAC to which the
|
|
Disassociation frame was sent and the reason for the
|
|
disassociation"
|
|
::= { bsnTraps 1 }
|
|
|
|
bsnDot11StationDeauthenticate NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId,
|
|
bsnStationReasonCode,
|
|
bsnUserIpAddress,
|
|
bsnStationUserName,
|
|
bsnStationMacAddress,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The deauthenticate notification shall be sent when the Station
|
|
sends a Deauthentication frame. The value of the notification
|
|
shall include the MAC address of the MAC to which the
|
|
Deauthentication frame was sent and the reason for the
|
|
deauthentication."
|
|
::= { bsnTraps 2 }
|
|
|
|
bsnDot11StationAuthenticateFail NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId,
|
|
bsnStationReasonCode,
|
|
bsnUserIpAddress,
|
|
bsnStationUserName,
|
|
bsnStationMacAddress,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authenticate failure notification shall be sent when the
|
|
Station sends an Authentication frame with a status code other
|
|
than 'successful'. The value of the notification shall include
|
|
the MAC address of the MAC to which the Authentication
|
|
frame was sent and the reason for the authentication failure."
|
|
::= { bsnTraps 3 }
|
|
|
|
bsnDot11StationAssociateFail NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId,
|
|
bsnStationReasonCode,
|
|
bsnUserIpAddress,
|
|
bsnStationUserName,
|
|
bsnStationMacAddress,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The associate failure notification shall be sent when the
|
|
Station sends an Association frame with a status code other
|
|
than 'successful'. The value of the notification
|
|
shall include the MAC address of the MAC to which the
|
|
Authentication frame was sent and the reason for the
|
|
authentication failure."
|
|
::= { bsnTraps 4 }
|
|
|
|
bsnDot11StationBlacklisted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId,
|
|
bsnStationBlacklistingReasonCode,
|
|
bsnUserIpAddress,
|
|
bsnStationUserName,
|
|
bsnStationMacAddress,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The station blacklisted notification shall be sent when the
|
|
client is blacklisted. The reason could be repeated auth or
|
|
association failures or IP Address theft.
|
|
The value of the notification shall include the MAC address
|
|
of the MAC to which the Authentication frame was sent, the
|
|
MAC and Slot Id of AP that client was associated to and the
|
|
reason for black listing."
|
|
::= { bsnTraps 52 }
|
|
|
|
bsnDot11StationAssociate NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId,
|
|
bsnUserIpAddress,
|
|
bsnStationMacAddress,
|
|
bsnStationUserName,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The associate notification shall be sent when any of the
|
|
watchlisted clients(present on at least one watch list)
|
|
associates with an AP. The value of the notification
|
|
shall include the MAC address and the Slot ID of the radio
|
|
to which the station Associated."
|
|
::= { bsnTraps 53 }
|
|
|
|
-- *************************************************************
|
|
-- Airespace AP related Traps
|
|
-- *************************************************************
|
|
|
|
bsnAPTrapControlMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mask describes what events merit traps to network
|
|
management. If the bit for a particular event is turned on
|
|
then notification will be generated on event occurance.
|
|
Event corresponding bit
|
|
----- -----------------
|
|
bsnAPAssociate/Disassociate 1
|
|
bsnAPIfUp/Down 4
|
|
bsnAPAuthorizationFailureCause 16
|
|
|
|
By Default all bits are on."
|
|
DEFVAL { 63 }
|
|
::= { bsnTrapControl 2 }
|
|
|
|
bsnAPUp NOTIFICATION-TYPE
|
|
OBJECTS { bsnAPDot3MacAddress }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"When Airespace AP operation status goes up this trap will be
|
|
sent"
|
|
::= { bsnTraps 5 }
|
|
|
|
bsnAPDown NOTIFICATION-TYPE
|
|
OBJECTS { bsnAPDot3MacAddress }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"When Airespace AP operation status goes down this trap will be
|
|
sent"
|
|
::= { bsnTraps 6 }
|
|
|
|
bsnAPAssociated NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnAPPortNumberTrapVariable,
|
|
bsnAPName
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"When Airespace AP Associates to a Airespace Switch, AP
|
|
associated notification will be sent with dot3 MAC address of
|
|
Airespace AP.This will help management system to discover
|
|
Airespace AP and add to system."
|
|
::= { bsnTraps 7 }
|
|
|
|
bsnAPDisassociated NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Airespace AP disassociates from Airespace Switch, AP
|
|
disassociated notification will be sent with dot3 MAC address
|
|
of Airespace AP management system to remove Airespace AP from
|
|
this Airespace Switch"
|
|
::= { bsnTraps 8 }
|
|
|
|
bsnAPIfUp NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPPortNumber,
|
|
bsnAPIfUpDownCause,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Airespace AP's interface's operation status goes up this
|
|
trap will be sent"
|
|
::= { bsnTraps 9 }
|
|
|
|
bsnAPIfDown NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPAdminStatus,
|
|
bsnAPIfAdminStatus,
|
|
bsnAPIfUpDownCause,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Airespace AP's interface's operation status goes down
|
|
this trap will be sent."
|
|
::= { bsnTraps 10 }
|
|
|
|
-- *************************************************************
|
|
-- RRM related trapControl and traps
|
|
-- *************************************************************
|
|
--
|
|
-- *************************************************************
|
|
-- Whenever LOAD, NOISE, INTERFERENCE, COVERAGE Profile state changes
|
|
-- from PASS to FAIL for Airespace AP IF, notification will be sent, if
|
|
-- configured to do so.
|
|
-- *************************************************************
|
|
|
|
bsnAPProfileTrapControlMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mask describes what events merit traps to network
|
|
management. If the bit for a particular event is turned
|
|
on then notification will be generated on event occurance.
|
|
Event corresponding bit
|
|
----- -----------------
|
|
LoadProfileFail 1
|
|
NoiseProfileFail 2
|
|
InterferenceProfileFail 4
|
|
CoverageProfileFailed 8"
|
|
::= { bsnTrapControl 3 }
|
|
|
|
bsnAPLoadProfileFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When LOAD Profile state changes from PASS to FAIL,
|
|
notification will be sent with Dot3 MAC address of Airespace
|
|
AP and slot ID of Airespace AP IF. This trap sending can be
|
|
enable/disable using bsnRrmProfileTrapControlFlag"
|
|
::= { bsnTraps 11 }
|
|
|
|
bsnAPNoiseProfileFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Noise Profile state changes from PASS to FAIL,
|
|
notification will be sent with Dot3 MAC address of Airespace
|
|
AP and slot ID of Airespace AP IF. This trap sending can be
|
|
enable/disable using bsnRrmProfileTrapControlFlag"
|
|
::= { bsnTraps 12 }
|
|
|
|
bsnAPInterferenceProfileFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Interference Profile state changes from PASS to FAIL,
|
|
notification will be sent with Dot3 MAC address of Airespace
|
|
AP and slot ID of Airespace AP IF. This trap sending can be
|
|
enable/disable using bsnRrmProfileTrapControlFlag"
|
|
::= { bsnTraps 13 }
|
|
|
|
-- *************************************************************
|
|
-- extra trap variables definining here
|
|
-- *************************************************************
|
|
|
|
bsnAPMacAddrTrapVariable OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 20 }
|
|
|
|
bsnAPNameTrapVariable OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 21 }
|
|
|
|
bsnAPSlotIdTrapVariable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Radio Interfaces on the Airespace AP."
|
|
::= { bsnTrapVariable 22 }
|
|
|
|
bsnAPChannelNumberTrapVariable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 23 }
|
|
|
|
bsnAPCoverageThresholdTrapVariable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 24 }
|
|
|
|
bsnAPCoverageFailedClients OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 25 }
|
|
|
|
bsnAPCoverageTotalClients OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 26 }
|
|
|
|
bsnClientMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 27 }
|
|
|
|
bsnClientRssi OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 28 }
|
|
|
|
bsnClientSnr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 29 }
|
|
|
|
bsnInterferenceEnergyBeforeChannelUpdate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 30 }
|
|
|
|
bsnInterferenceEnergyAfterChannelUpdate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 31 }
|
|
|
|
bsnAPPortNumberTrapVariable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 32 }
|
|
|
|
bsnAPPreviousChannelNumberTrapVariable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 83 }
|
|
|
|
bsnAPReasonCodeTrapVariable OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
noReason(0),
|
|
signal(1),
|
|
noise(2),
|
|
interference(3),
|
|
load(4),
|
|
radar(5),
|
|
deviceAware(6),
|
|
majorSIAQEvent(7)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 84 }
|
|
|
|
bsnNoiseBeforeChannelUpdate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 85 }
|
|
|
|
bsnNoiseAfterChannelUpdate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 86 }
|
|
|
|
bsnInterferenceBeforeChannelUpdate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 87 }
|
|
|
|
bsnInterferenceAfterChannelUpdate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 88 }
|
|
|
|
bsnAPCoverageProfileFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnAPNameTrapVariable,
|
|
bsnAPSlotIdTrapVariable,
|
|
bsnAPCoverageThresholdTrapVariable,
|
|
bsnAPCoverageFailedClients,
|
|
bsnAPCoverageTotalClients,
|
|
bsnClientMacAddr,
|
|
bsnClientRssi,
|
|
bsnClientSnr,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Coverage Profile state changes from PASS to FAIL,
|
|
notification will be sent with Dot3 MAC address of Airespace
|
|
AP and slot ID of Airespace AP IF. This trap sending can be
|
|
enable/disable using bsnRrmProfileTrapControlFlag"
|
|
::= { bsnTraps 14 }
|
|
|
|
bsnAPLoadProfileUpdatedToPass NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When LOAD Profile state changes from FAIL to PASSt this
|
|
notification will be sent with Dot3 MAC address of Airespace
|
|
AP and slot ID of Airespace AP IF. This trap sending can be
|
|
enable/disable using bsnRrmProfileTrapControlFlag"
|
|
::= { bsnTraps 37 }
|
|
|
|
bsnAPNoiseProfileUpdatedToPass NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Noise Profile state changes from FAIL tp PASS,
|
|
notification will be sent with Dot3 MAC address of Airespace
|
|
AP and slot ID of Airespace AP IF. This trap sending can be
|
|
enable/disable using bsnRrmProfileTrapControlFlag"
|
|
::= { bsnTraps 38 }
|
|
|
|
bsnAPInterferenceProfileUpdatedToPass NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Interference Profile state changes from FAIL tp PASS,
|
|
notification will be sent with Dot3 MAC address of Airespace
|
|
AP and slot ID of Airespace AP IF. This trap sending can be
|
|
enable /disable using bsnRrmProfileTrapControlFlag"
|
|
::= { bsnTraps 39 }
|
|
|
|
bsnAPCoverageProfileUpdatedToPass NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Coverage Profile state changes from FAIL tp PASS,
|
|
notification will be sent with Dot3 MAC address of Airespace
|
|
AP and slot ID of Airespace AP IF. This trap sending can be
|
|
enable/disable using bsnRrmProfileTrapControlFlag"
|
|
::= { bsnTraps 40 }
|
|
|
|
bsnAPParamUpdateTrapControlMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac Parameters are updated for a Airespace AP interface
|
|
whenever Dynamic Algorithm are run. This mask describes
|
|
what update events merit traps to network management. If
|
|
the bit for a particular event is turned on then
|
|
notification will be generated on event occurance.
|
|
Event corresponding bit
|
|
----- -----------------
|
|
TxPowerChange 1
|
|
ChannelChange 2
|
|
AntennaChange 4
|
|
RTSCTSThresholdChange 8
|
|
EDThresholdChange 16
|
|
FragmentationThresholdChange 32"
|
|
::= { bsnTrapControl 4 }
|
|
|
|
bsnAPCurrentTxPowerChanged NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfPhyTxPowerLevel,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whenever dynamic algorithms are running and
|
|
bsnAPIfPhyPowerAutomaticOn is true, Airespace AP Interface's
|
|
CurrentTxPower might get updated by algorithm. When
|
|
this occurs notification will be sent with Dot3 MAC address of
|
|
Airespace AP and slot ID of Airespace AP IF along with the
|
|
currentTxPower for this Airespace AP IF"
|
|
::= { bsnTraps 15 }
|
|
|
|
bsnAPCurrentChannelChanged NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnAPSlotIdTrapVariable,
|
|
bsnAPChannelNumberTrapVariable,
|
|
bsnInterferenceEnergyBeforeChannelUpdate,
|
|
bsnInterferenceEnergyAfterChannelUpdate,
|
|
bsnAPPreviousChannelNumberTrapVariable,
|
|
bsnAPReasonCodeTrapVariable,
|
|
bsnNoiseBeforeChannelUpdate,
|
|
bsnNoiseAfterChannelUpdate,
|
|
bsnInterferenceBeforeChannelUpdate,
|
|
bsnInterferenceAfterChannelUpdate,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whenever dynamic algorithms are running and
|
|
bsnAPIfPhyChannelAutomaticOn is true, Airespace AP
|
|
Interface's CurrentChannel might get updated by algorithm.
|
|
When this occurs notification will be sent with Dot3 MAC
|
|
address of Airespace AP and slot ID of Airespace AP IF along
|
|
with the currentChannel for this Airespace AP IF"
|
|
::= { bsnTraps 16 }
|
|
|
|
-- *************************************************************
|
|
-- Also, when dynamic grouping is done and new Group leader is choosen
|
|
-- NMS needs to be informed so that necessary updates can be done in
|
|
-- NMS.
|
|
-- *************************************************************
|
|
|
|
bsnRrmDot11aGroupingDone NOTIFICATION-TYPE
|
|
OBJECTS { bsnRrmDot11aGroupLeaderMacAddr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Grouping is done, this notification will be sent from the
|
|
previous Group Leader where grouping algorithm was run. It has
|
|
MAC address of the new Group Leader."
|
|
::= { bsnTraps 21 }
|
|
|
|
bsnRrmDot11bGroupingDone NOTIFICATION-TYPE
|
|
OBJECTS { bsnRrmDot11bGroupLeaderMacAddr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Grouping is done, this notification will be sent from the
|
|
previous Group Leader where grouping algorithm was run. It has
|
|
MAC address of the new Group Leader."
|
|
::= { bsnTraps 22 }
|
|
|
|
bsnConfigSaveTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Rogue AP Detection and Removed Traps need to be sent"
|
|
::= { bsnTrapControl 9 }
|
|
|
|
bsnConfigSaved NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When configuration is save either from CLI or web interface
|
|
This trap will be sent to inform NMS to do refresh"
|
|
::= { bsnTraps 23 }
|
|
|
|
bsnDot11EssCreated NOTIFICATION-TYPE
|
|
OBJECTS { bsnDot11EssIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whenever a new Ess (WLAN) is created, this notification will
|
|
be sent along with EssIndex"
|
|
::= { bsnTraps 24 }
|
|
|
|
bsnDot11EssDeleted NOTIFICATION-TYPE
|
|
OBJECTS { bsnDot11EssIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whenever a Ess (WLAN)is deleted, this notification will be
|
|
sent along with EssIndex"
|
|
::= { bsnTraps 25 }
|
|
|
|
-- *************************************************************
|
|
-- AAA Traps
|
|
-- *************************************************************
|
|
|
|
bsnAuthFailureUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 1 }
|
|
|
|
bsnAuthFailureUserType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mgmtUser(1),
|
|
wlanUser(2),
|
|
macFilter(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 2 }
|
|
|
|
bsnRADIUSServerTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"if RADIUS Server Traps need to be sent"
|
|
::= { bsnTrapControl 7 }
|
|
|
|
bsnAuthenticationFailureTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Authentication Failure Traps need to be sent"
|
|
::= { bsnTrapControl 8 }
|
|
|
|
bsn80211SecurityTrapControlMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mask is for Security related trap controls.
|
|
|
|
Event corresponding bit
|
|
----- -----------------
|
|
bsnWepKeyDecryptError 1
|
|
bsnSignatureAttackDetected 2
|
|
|
|
By Default all bits are off."
|
|
DEFVAL { 0 }
|
|
::= { bsnTrapControl 10 }
|
|
|
|
bsnWpsTrapControlEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This control is for WPS(Wireless Intrusion Protection
|
|
System) related traps."
|
|
DEFVAL { disable }
|
|
::= { bsnTrapControl 11 }
|
|
|
|
bsnRADIUSServerNotResponding NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is to indicate that no RADIUS server(s) are responding
|
|
to authentication requests sent by the RADIUS client within the
|
|
MWAR device(Switch)."
|
|
::= { bsnTraps 26 }
|
|
|
|
bsnAuthenticationFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAuthFailureUserType,
|
|
bsnAuthFailureUserName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is to inform that client authentication failure has
|
|
occured at MWAR(Switch). This could be cli/web user, wlan user,
|
|
or Mac Authorized user. ServiceType will indicate which type of
|
|
user it is and userName will be cli/web/wlan userName or
|
|
MacAddress of Mac Authorized User"
|
|
::= { bsnTraps 27 }
|
|
|
|
-- IPSEC Traps
|
|
|
|
bsnRemoteIPv4Address OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 3 }
|
|
|
|
bsnIpsecErrorCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 4 }
|
|
|
|
bsnIpsecSPI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 5 }
|
|
|
|
bsnRemoteUdpPort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 6 }
|
|
|
|
bsnIkeAuthMethod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 7 }
|
|
|
|
bsnIkeTotalInitFailures OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 8 }
|
|
|
|
bsnIkeTotalInitNoResponses OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 9 }
|
|
|
|
bsnIkeTotalRespFailures OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 10 }
|
|
|
|
bsnNotifiesSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 11 }
|
|
|
|
bsnNotifiesReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 12 }
|
|
|
|
bsnSuiteInitFailures OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 13 }
|
|
|
|
bsnSuiteRespondFailures OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 14 }
|
|
|
|
bsnInitiatorCookie OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The initiator cookie used in an ISAKMP message, to be
|
|
associated with a trap."
|
|
::= { bsnTrapVariable 15 }
|
|
|
|
bsnResponderCookie OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The responder cookie used in an ISAKMP message, to be
|
|
associated with a trap."
|
|
::= { bsnTrapVariable 16 }
|
|
|
|
bsnIsakmpInvalidCookies OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 17 }
|
|
|
|
bsnIpsecTrapsMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mask describes what events merit traps to network
|
|
management. If the bit for a particular event is turned
|
|
on then notification will be generated on event occurance.
|
|
Event corresponding bit
|
|
----- -----------------
|
|
bsnIpsecEspAuthFailureTrap 1
|
|
bsnIpsecEspReplayFailureTrap 2
|
|
bsnIpsecEspPolicyFailureTrap 4
|
|
bsnIpsecEspInvalidSpiTrap 8
|
|
bsnIpsecOtherPolicyFailureTrap 16
|
|
bsnIpsecIkeNegFailure 32
|
|
bsnIpsecSuiteNegFailure 64
|
|
bsnIpsecInvalidCookieTrap 128"
|
|
::= { bsnTrapControl 5 }
|
|
|
|
bsnIpsecEspAuthFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRemoteIPv4Address,
|
|
bsnIpsecErrorCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPsec packets with invalid hashes were found in an inbound
|
|
ESP SA. The total number of authentication errors
|
|
accumulated is sent for the specific row of the
|
|
ipsecSaEspInTable table for the SA; this provides the
|
|
identity of the SA in which the error occurred.
|
|
|
|
Implementations SHOULD send one trap per SA (within a
|
|
reasonable time period), rather than sending one trap per
|
|
packet."
|
|
::= { bsnTraps 28 }
|
|
|
|
bsnIpsecEspReplayFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRemoteIPv4Address,
|
|
bsnIpsecErrorCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPsec packets with invalid sequence numbers were found in
|
|
an inbound ESP SA. The total number of replay errors
|
|
accumulated is sent for the specific row of the
|
|
ipsecSaEspInTable table for the SA; this provides the
|
|
identity of the SA in which the error occurred.
|
|
|
|
Implementations SHOULD send one trap per SA (within a
|
|
reasonable time period), rather than sending one trap per
|
|
packet."
|
|
::= { bsnTraps 29 }
|
|
|
|
bsnIpsecEspInvalidSpiTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRemoteIPv4Address,
|
|
bsnIpsecSPI
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A packet with an unknown SPI was detected from the
|
|
specified peer with the specified SPI using the specified
|
|
protocol. The destination address of the received packet is
|
|
specified by ipsecLocalAddress.
|
|
|
|
The value ifIndex may be 0 if this optional linkage is
|
|
unsupported.
|
|
|
|
If the object ipsecSecurityProtocol has the value for
|
|
IPcomp, then the ipsecSPI object is the CPI of the packet.
|
|
|
|
Implementations SHOULD send one trap per peer (within a
|
|
reasonable time period), rather than sending one trap per
|
|
packet."
|
|
::= { bsnTraps 31 }
|
|
|
|
bsnIpsecIkeNegFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRemoteIPv4Address,
|
|
bsnRemoteUdpPort,
|
|
bsnIkeAuthMethod,
|
|
bsnIkeTotalInitFailures,
|
|
bsnIkeTotalInitNoResponses,
|
|
bsnIkeTotalRespFailures,
|
|
bsnNotifiesSent,
|
|
bsnNotifiesReceived
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An attempt to negotiate a phase 1 IKE SA failed.
|
|
The notification counts are also sent as part of the trap,
|
|
along with the current value of the total negotiation error
|
|
counters for ISAKMP."
|
|
::= { bsnTraps 33 }
|
|
|
|
bsnIpsecSuiteNegFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRemoteIPv4Address,
|
|
bsnSuiteInitFailures,
|
|
bsnSuiteRespondFailures,
|
|
bsnNotifiesSent,
|
|
bsnNotifiesReceived
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An attempt to negotiate a phase 2 SA suite for the
|
|
specified selector failed.
|
|
The current total failure counts are passed as well as the
|
|
notification type counts for the notify involved in the
|
|
failure."
|
|
::= { bsnTraps 34 }
|
|
|
|
bsnIpsecInvalidCookieTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRemoteIPv4Address,
|
|
bsnRemoteUdpPort,
|
|
bsnInitiatorCookie,
|
|
bsnResponderCookie,
|
|
bsnIsakmpInvalidCookies
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISAKMP packets with invalid cookies were detected from the
|
|
specified source, intended for the specified destination.
|
|
|
|
The initiator and responder cookies are also sent with the
|
|
trap.
|
|
|
|
The current count is sent to allow the trap to accurately
|
|
relfect dropped and throttled traps.
|
|
|
|
Implementations SHOULD send one trap per peer (within a
|
|
reasonable time period, rather than sending one trap per
|
|
packet."
|
|
::= { bsnTraps 35 }
|
|
|
|
bsnRogueAPTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Rogue AP Detection and Removed Traps need to be sent"
|
|
::= { bsnTrapControl 6 }
|
|
|
|
bsnRogueAPDetected NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnRogueAPAirespaceAPMacAddress,
|
|
bsnRogueAPAirespaceAPSlotId,
|
|
bsnRogueAPSsid,
|
|
bsnRogueAPChannelNumber,
|
|
bsnRogueAPAirespaceAPRSSI,
|
|
bsnRogueAPAirespaceAPSNR,
|
|
bsnRogueAPOnWiredNetwork,
|
|
bsnRogueAdhocMode,
|
|
bsnRogueAPRadioType,
|
|
bsnRogueAPAirespaceAPName,
|
|
bsnRogueAPClassType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When a Rogue AP is detected this Trap will be sent out along
|
|
with APMacAddress on which its detected"
|
|
::= { bsnTraps 36 }
|
|
|
|
bsnRogueAPRemoved NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnRogueAPAirespaceAPMacAddress,
|
|
bsnRogueAPAirespaceAPSlotId,
|
|
bsnRogueAPRadioType,
|
|
bsnRogueAPAirespaceAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When a Rogue AP that was detected earlier no longer exists
|
|
this Trap will be sent out along
|
|
with APMacAddress on which its detected"
|
|
::= { bsnTraps 41 }
|
|
|
|
bsnRogueAPDetectedOnWiredNetwork NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnRogueAPOnWiredNetwork,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When a Rogue is detected on the wired network this trap will
|
|
be sent out.
|
|
The same trap with bsnRogueAPOnWiredNetwork set to no will
|
|
clear the previous trap."
|
|
::= { bsnTraps 59 }
|
|
|
|
bsnApHasNoRadioCards NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When an AP has no radio cards present on it, the switch
|
|
sends this trap."
|
|
::= { bsnTraps 60 }
|
|
|
|
bsnDuplicateIpAddressReported NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnDuplicateIpReportedByAP,
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnDuplicateIpTrapVariable,
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnDuplicateIpTrapClear,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is issued when the switch or an AP detects another
|
|
machine using its IP Address. The first variable has value
|
|
yes if the duplicate IP is reported by an AP. In that case,
|
|
the second attribute will carry the AP MAC Address. The third
|
|
variable is the duplicate IP address in question and the last
|
|
attribute is the MAC Address of the machine that is found to
|
|
be using the duplicate IP."
|
|
::= { bsnTraps 61 }
|
|
|
|
bsnAPContainedAsARogue NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfType,
|
|
bsnClearTrapVariable,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When our AP detects that it is being contained by another AP,
|
|
this trap is issued. The clear flag is true if the AP is no
|
|
longer being contained."
|
|
::= { bsnTraps 62 }
|
|
|
|
bsnNetworkStateChanged NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnNetworkType,
|
|
bsnNetworkState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the 802.11a or b/g network state is changed this trap
|
|
is issued."
|
|
::= { bsnTraps 69 }
|
|
|
|
bsnSignatureAttackDetected NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPName,
|
|
bsnAPIfType,
|
|
bsnSignatureType,
|
|
bsnSignatureName,
|
|
bsnSignatureDescription,
|
|
bsnClearTrapVariable,
|
|
bsnSignatureAttackPreced,
|
|
bsnSignatureAttackFrequency,
|
|
bsnSignatureAttackChannel,
|
|
bsnSignatureAttackerMacAddress,
|
|
bsnSignatureMacInfo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent out when a signature attack is detected by
|
|
the switch. The standard and custom signatures are predefined
|
|
on the switch (see bsnSignatureConfig group). The signatures
|
|
also defines if its detection should be reported. The trap
|
|
variables bsnSignatureName and bsnSignatureDescription are
|
|
retrieved from the detected signature definition. Clear Trap
|
|
Variable is turned on when the signature attack stops. The
|
|
signature's quiet time configuration speicifes the time after
|
|
which the clear trap would be sent. bsnSignatureMacInfo
|
|
indicates whether the signature is used to track
|
|
pattern matches for all source MAC addresses together or
|
|
seperately for individual source MAC addresses.
|
|
bsnSignatureAttackFrequency will carry the value for a
|
|
specific MAC address or for all MAC addresses depending on
|
|
bsnSignatureMacInfo."
|
|
::= { bsnTraps 70 }
|
|
|
|
bsnAPRadioCardTxFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfType,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent by the switch when a radio card on an AP
|
|
stops transmitting."
|
|
::= { bsnTraps 71 }
|
|
|
|
bsnAPRadioCardTxFailureClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfType,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent by the switch when a radio card on an AP
|
|
starts transmitting again after a prior failure."
|
|
::= { bsnTraps 72 }
|
|
|
|
bsnAPRadioCardRxFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfType,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent by the switch when a radio card on an AP
|
|
stops receiving."
|
|
::= { bsnTraps 73 }
|
|
|
|
bsnAPRadioCardRxFailureClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfType,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent by the switch when a radio card on an AP
|
|
starts receiving again after a prior failure."
|
|
::= { bsnTraps 74 }
|
|
|
|
bsnAPImpersonationDetected NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnImpersonatedAPMacAddr,
|
|
bsnImpersonatingSourceMacAddr,
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfType,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent by the switch when a radio of an
|
|
authenticated AP hears from another AP whose MAC Address
|
|
neither matches that of a rogue's and nor is it an
|
|
authenticated neighbor of the detecting AP."
|
|
::= { bsnTraps 75 }
|
|
|
|
bsnAPRegulatoryDomainMismatch NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPName,
|
|
bsnApRegulatoryDomain,
|
|
bsnGlobalDot11CountryIndex
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This trap is generated if an AP's regulatory domain doesn't
|
|
match the country the switch is configured for. Due to the
|
|
mismatch, the AP will fail to associate with the Switch."
|
|
::= { bsnTraps 79 }
|
|
|
|
bsnTrustedApHasInvalidPreamble NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnTrustedApPreambleUsed,
|
|
bsnTrustedApPreambleRequired,
|
|
bsnClearTrapVariable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Issued when a Trusted Rogue AP is auto contained for using invalid
|
|
preamble. The second param is for the preamble used and the third
|
|
param is for preamble required. If the clear variable has value
|
|
true, then the trap clears the earlier alert."
|
|
::= { bsnTraps 76 }
|
|
|
|
bsnCurrentRadiosCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 18 }
|
|
|
|
bsnLicenseRadioCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 19 }
|
|
|
|
bsnMaxRogueCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 33 }
|
|
|
|
bsnStationMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 34 }
|
|
|
|
bsnStationAPMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 35 }
|
|
|
|
bsnStationAPIfSlotId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 36 }
|
|
|
|
bsnStationReasonCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unspecified(1),
|
|
previousAuthNotValid(2),
|
|
deauthenticationLeaving(3),
|
|
disassociationDueToInactivity(4),
|
|
disassociationAPBusy(5),
|
|
class2FrameFromNonAuthStation(6),
|
|
class2FrameFromNonAssStation(7),
|
|
disassociationStaHasLeft(8),
|
|
staReqAssociationWithoutAuth(9),
|
|
invalidInformationElement(40),
|
|
groupCipherInvalid(41),
|
|
unicastCipherInvalid(42),
|
|
akmpInvalid(43),
|
|
unsupportedRsnVersion(44),
|
|
invalidRsnIeCapabilities(45),
|
|
cipherSuiteRejected(46),
|
|
missingReasonCode(99)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 37 }
|
|
|
|
bsnStationBlacklistingReasonCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
failed80211Auth(1),
|
|
failedAssociation(2),
|
|
ipTheft(3),
|
|
failed8021xAuth(4),
|
|
failedWebAuth(5)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 38 }
|
|
|
|
bsnStationUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name of a client. This is used for the Client
|
|
Associated trap. It may be null when not known."
|
|
::= { bsnTrapVariable 39 }
|
|
|
|
bsnRogueAPOnWiredNetwork OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the flag used on the bsnRogueAPDetected trap to
|
|
state if the rogue is found on the wired network.
|
|
Typically, after a rogue is found, there may be another
|
|
bsnRogueAPDetected trap that will have the value
|
|
of this flag 1 if the rogue is detected on the wired
|
|
network."
|
|
::= { bsnTrapVariable 40 }
|
|
|
|
bsnNavDosAttackSourceMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address generating the attack."
|
|
::= { bsnTrapVariable 41 }
|
|
|
|
bsnWlanIdTrapVariable OBJECT-TYPE
|
|
SYNTAX INTEGER (1..517)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WLAN ID used by the client when the WPA MIC error
|
|
counter measure was activated."
|
|
::= { bsnTrapVariable 42 }
|
|
|
|
bsnUserIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 43 }
|
|
|
|
bsnRogueAdhocMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the flag used on the bsnRogueAPDetected trap to
|
|
state if the rogue found is an Adhoc rogue or it is an AP."
|
|
::= { bsnTrapVariable 44 }
|
|
|
|
bsnClearTrapVariable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the flag is used to indicate if this is a clear
|
|
trap for the original alert or not."
|
|
::= { bsnTrapVariable 45 }
|
|
|
|
bsnDuplicateIpTrapVariable OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used on the bsnDuplicateIpAddressReported
|
|
trap to contain the IP Address in question when switch
|
|
or an AP detected a duplicate IP Address on another
|
|
machine."
|
|
::= { bsnTrapVariable 46 }
|
|
|
|
bsnDuplicateIpTrapClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the flag used to indicate clear state for the
|
|
bsnDuplicateIpAddressReported trap."
|
|
::= { bsnTrapVariable 47 }
|
|
|
|
bsnDuplicateIpReportedByAP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the flag used on the bsnDuplicateIpAddressReported
|
|
trap to indicate whether the switch or an AP detected a
|
|
duplicate IP Address on another machine."
|
|
::= { bsnTrapVariable 48 }
|
|
|
|
bsnTrustedApRadioPolicyRequired OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
dot11b(1),
|
|
dot11a(2),
|
|
dot11bg(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the radio policy required by a trusted Rogue."
|
|
::= { bsnTrapVariable 49 }
|
|
|
|
bsnTrustedApEncryptionUsed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
open(1),
|
|
wep(2),
|
|
wpa(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the encryption type used by a trusted Rogue."
|
|
::= { bsnTrapVariable 50 }
|
|
|
|
bsnTrustedApEncryptionRequired OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
open(1),
|
|
wep(2),
|
|
wpa(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the encryption type required by a trusted Rogue."
|
|
::= { bsnTrapVariable 51 }
|
|
|
|
bsnTrustedApRadioPolicyUsed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
dot11b(1),
|
|
dot11a(2),
|
|
dot11bg(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the radio policy used by a trusted Rogue."
|
|
::= { bsnTrapVariable 52 }
|
|
|
|
bsnNetworkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot11b(1),
|
|
dot11a(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 53 }
|
|
|
|
bsnNetworkState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnTrapVariable 54 }
|
|
|
|
bsnSignatureType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
standard(0),
|
|
custom(1)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of Signature whose attack is detected by the switch."
|
|
::= { bsnTrapVariable 55 }
|
|
|
|
bsnSignatureName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Signature whose attack is detected by the
|
|
switch."
|
|
::= { bsnTrapVariable 56 }
|
|
|
|
bsnSignatureDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description of the Signature whose attack is detected by
|
|
the switch."
|
|
::= { bsnTrapVariable 57 }
|
|
|
|
bsnImpersonatedAPMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of the AP impersonated by another AP."
|
|
::= { bsnTrapVariable 58 }
|
|
|
|
bsnTrustedApPreambleUsed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
short(1),
|
|
long(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preamble on this detecting AP."
|
|
::= { bsnTrapVariable 59 }
|
|
|
|
bsnTrustedApPreambleRequired OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
short(1),
|
|
long(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preamble on this detecting AP."
|
|
::= { bsnTrapVariable 60 }
|
|
|
|
bsnSignatureAttackPreced OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preced in the standard/custom signature list."
|
|
::= { bsnTrapVariable 61 }
|
|
|
|
bsnSignatureAttackFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preced in the standard/custom signature list."
|
|
::= { bsnTrapVariable 62 }
|
|
|
|
bsnSignatureAttackChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preced in the standard/custom signature list."
|
|
::= { bsnTrapVariable 63 }
|
|
|
|
bsnSignatureAttackerMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the Attacker's mac-interface."
|
|
::= { bsnTrapVariable 64 }
|
|
|
|
bsnApRegulatoryDomain OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
a(0),
|
|
e(1),
|
|
i(6),
|
|
j(9),
|
|
c(16),
|
|
n(21),
|
|
k(32),
|
|
p(33),
|
|
s(34),
|
|
t(35),
|
|
r(48),
|
|
notavailable(65535)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The regulatory domain configured on an AP."
|
|
::= { bsnTrapVariable 68 }
|
|
|
|
bsnRadiosExceedLicenseCount NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnCurrentRadiosCount,
|
|
bsnLicenseRadioCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whenever the currently associated Radios exceed the License Count
|
|
This trap will be sent to annoy the Customer"
|
|
::= { bsnTraps 42 }
|
|
|
|
bsnSensedTemperatureTooHigh NOTIFICATION-TYPE
|
|
OBJECTS { bsnSensorTemperature }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature sensor temp too High - temp is too high on the unit.
|
|
Immediate action should be taken"
|
|
::= { bsnTraps 43 }
|
|
|
|
bsnSensedTemperatureTooLow NOTIFICATION-TYPE
|
|
OBJECTS { bsnSensorTemperature }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature sensor temp too Low - temp is too high on the unit.
|
|
Immediate action should be taken"
|
|
::= { bsnTraps 44 }
|
|
|
|
bsnTemperatureSensorFailure NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature sensor hw failure - temp sensor has failed.
|
|
Temperature is unknown"
|
|
::= { bsnTraps 45 }
|
|
|
|
bsnTemperatureSensorClear NOTIFICATION-TYPE
|
|
OBJECTS { bsnSensorTemperature }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature sensor clear -- temp sensor alarm condition is over.
|
|
sensor is operating within proper temp range"
|
|
::= { bsnTraps 46 }
|
|
|
|
bsnPOEControllerFailure NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"POE Controller has failed. Its a very critical trap.
|
|
User intervention is required."
|
|
::= { bsnTraps 47 }
|
|
|
|
bsnMaxRogueCountExceeded NOTIFICATION-TYPE
|
|
OBJECTS { bsnMaxRogueCount }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of rogues has exceeded the maximum Rogues allowed"
|
|
::= { bsnTraps 48 }
|
|
|
|
bsnMaxRogueCountClear NOTIFICATION-TYPE
|
|
OBJECTS { bsnMaxRogueCount }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of rogues is within the maximum Rogues allowed"
|
|
::= { bsnTraps 49 }
|
|
|
|
bsnApMaxRogueCountExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnMaxRogueCount,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of rogues has exceeded the maximum Rogues allowed on
|
|
the AP"
|
|
::= { bsnTraps 50 }
|
|
|
|
bsnApMaxRogueCountClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnMaxRogueCount,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of rogues is within the maximum Rogues allowed on the
|
|
AP"
|
|
::= { bsnTraps 51 }
|
|
|
|
bsnApBigNavDosAttack NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnAPSlotIdTrapVariable,
|
|
bsnNavDosAttackSourceMacAddr,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AP sent a string of messages with large NAV field. This is most
|
|
likely a malicious denial of service attack."
|
|
::= { bsnTraps 55 }
|
|
|
|
bsnTooManyUnsuccessLoginAttempts NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnUserIpAddress,
|
|
bsnStationUserName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Management User made too many unsuccessful login attempts."
|
|
::= { bsnTraps 56 }
|
|
|
|
bsnWepKeyDecryptError NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnStationMacAddress,
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Issued when a decrypt error occurrs. The WEP Key configured at
|
|
the station may be wrong."
|
|
::= { bsnTraps 57 }
|
|
|
|
bsnWpaMicErrorCounterActivated NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnStationMacAddress,
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId,
|
|
bsnWlanIdTrapVariable,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Issued when a WPA MIC error occurs and a counter measure is
|
|
activated at the AP."
|
|
::= { bsnTraps 58 }
|
|
|
|
bsnAdhocRogueAutoContained NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnClearTrapVariable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Issued when an Adhoc Rogue is auto contained.
|
|
If the clear variable has value true, then the trap clears the
|
|
earlier alert."
|
|
::= { bsnTraps 65 }
|
|
|
|
bsnRogueApAutoContained NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnClearTrapVariable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Issued when a Rogue AP is auto contained for advertising our SSID.
|
|
If the clear variable has value true, then the trap clears the
|
|
earlier alert."
|
|
::= { bsnTraps 66 }
|
|
|
|
bsnTrustedApHasInvalidEncryption NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnTrustedApEncryptionUsed,
|
|
bsnTrustedApEncryptionRequired,
|
|
bsnClearTrapVariable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Issued when a Trusted Rogue AP is auto contained for using
|
|
invalid encryption. The second param is for the encryption used
|
|
and the third param is for encryption required.
|
|
If the clear variable has value true, then the trap clears the
|
|
earlier alert."
|
|
::= { bsnTraps 67 }
|
|
|
|
bsnTrustedApHasInvalidRadioPolicy NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnTrustedApRadioPolicyUsed,
|
|
bsnTrustedApRadioPolicyRequired,
|
|
bsnClearTrapVariable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Issued when a Trusted Rogue AP is auto contained for using
|
|
invalid radio policy. The second param is for the radio policy
|
|
used and the third param is for radio policy required.
|
|
If the clear variable has value true, then the trap clears the
|
|
earlier alert."
|
|
::= { bsnTraps 68 }
|
|
|
|
bsnTrustedApHasInvalidSsid NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnClearTrapVariable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Issued when a Trusted Rogue AP is auto contained for advertising
|
|
invalid SSID.
|
|
If the clear variable has value true, then the trap clears the
|
|
earlier alert."
|
|
::= { bsnTraps 63 }
|
|
|
|
bsnTrustedApIsMissing NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnClearTrapVariable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Issued when a Trusted Rogue AP is missing or has failed.
|
|
If the clear variable has value true, then the trap clears the
|
|
earlier alert."
|
|
::= { bsnTraps 64 }
|
|
|
|
bsnImpersonatingSourceMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the source mac address which is impersonating
|
|
the AP."
|
|
::= { bsnTrapVariable 74 }
|
|
-- ********************************************************************
|
|
-- * Begin of Syslog
|
|
-- ********************************************************************
|
|
|
|
bsnSyslog OBJECT IDENTIFIER
|
|
::= { bsnUtility 1 }
|
|
|
|
|
|
bsnSyslogEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bsnSyslog 1 }
|
|
|
|
bsnSyslogRemoteAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This would be the IP Address or host name"
|
|
::= { bsnSyslog 2 }
|
|
-- ********************************************************************
|
|
-- bsn Ping
|
|
-- ********************************************************************
|
|
|
|
bsnPing OBJECT IDENTIFIER
|
|
::= { bsnUtility 2 }
|
|
|
|
|
|
bsnPingTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnPingTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PingTest Table"
|
|
::= { bsnPing 1 }
|
|
|
|
bsnPingTestEntry OBJECT-TYPE
|
|
SYNTAX BsnPingTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the bsnPingTest
|
|
Table."
|
|
INDEX { bsnPingTestId }
|
|
::= { bsnPingTestTable 1 }
|
|
|
|
BsnPingTestEntry ::= SEQUENCE {
|
|
bsnPingTestId Integer32,
|
|
bsnPingTestIPAddress IpAddress,
|
|
bsnPingTestSendCount Integer32,
|
|
bsnPingTestReceivedCount Integer32,
|
|
bsnPingTestStatus INTEGER,
|
|
bsnPingTestMaxTimeInterval Unsigned32,
|
|
bsnPingTestMinTimeInterval Unsigned32,
|
|
bsnPingTestAvgTimeInterval Unsigned32,
|
|
bsnPingTestRowStatus RowStatus
|
|
}
|
|
|
|
bsnPingTestId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..24)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test ID"
|
|
::= { bsnPingTestEntry 1 }
|
|
|
|
bsnPingTestIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip Address to ping"
|
|
::= { bsnPingTestEntry 2 }
|
|
|
|
bsnPingTestSendCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bytes sent"
|
|
::= { bsnPingTestEntry 3 }
|
|
|
|
bsnPingTestReceivedCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bytes received."
|
|
::= { bsnPingTestEntry 4 }
|
|
|
|
bsnPingTestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inprogress(1),
|
|
complete(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the ping test"
|
|
::= { bsnPingTestEntry 5 }
|
|
|
|
bsnPingTestMaxTimeInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "mSec"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum time interval in msec."
|
|
::= { bsnPingTestEntry 6 }
|
|
|
|
bsnPingTestMinTimeInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "mSec"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum time interval in msec."
|
|
::= { bsnPingTestEntry 7 }
|
|
|
|
bsnPingTestAvgTimeInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "mSec"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average time interval in msec."
|
|
::= { bsnPingTestEntry 8 }
|
|
|
|
bsnPingTestRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnPingTestEntry 25 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- bsn Link
|
|
-- ********************************************************************
|
|
|
|
bsnLinkTest OBJECT IDENTIFIER
|
|
::= { bsnUtility 3 }
|
|
|
|
|
|
bsnLinkTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnLinkTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"LinkTest Table"
|
|
::= { bsnLinkTest 1 }
|
|
|
|
bsnLinkTestEntry OBJECT-TYPE
|
|
SYNTAX BsnLinkTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the bsnLinkTest
|
|
Table."
|
|
INDEX { bsnLinkTestId }
|
|
::= { bsnLinkTestTable 1 }
|
|
|
|
BsnLinkTestEntry ::= SEQUENCE {
|
|
bsnLinkTestId Integer32,
|
|
bsnLinkTestMacAddress MacAddress,
|
|
bsnLinkTestSendPktCount Integer32,
|
|
bsnLinkTestSendPktLength Integer32,
|
|
bsnLinkTestReceivedPktCount Integer32,
|
|
bsnLinkTestClientRSSI Integer32,
|
|
bsnLinkTestLocalSNR Integer32,
|
|
bsnLinkTestLocalRSSI Integer32,
|
|
bsnLinkTestStatus INTEGER,
|
|
bsnLinkTestRowStatus RowStatus
|
|
}
|
|
|
|
bsnLinkTestId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..24)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Link Test ID"
|
|
::= { bsnLinkTestEntry 1 }
|
|
|
|
bsnLinkTestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"MAC Address of link to test"
|
|
::= { bsnLinkTestEntry 2 }
|
|
|
|
bsnLinkTestSendPktCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of packets sent."
|
|
DEFVAL { 3 }
|
|
::= { bsnLinkTestEntry 3 }
|
|
|
|
bsnLinkTestSendPktLength OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2000)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Length of sent packet"
|
|
DEFVAL { 500 }
|
|
::= { bsnLinkTestEntry 4 }
|
|
|
|
bsnLinkTestReceivedPktCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of received packets."
|
|
::= { bsnLinkTestEntry 5 }
|
|
|
|
bsnLinkTestClientRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Client RSSI value of link."
|
|
::= { bsnLinkTestEntry 6 }
|
|
|
|
bsnLinkTestLocalSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Local SNR of the link"
|
|
::= { bsnLinkTestEntry 7 }
|
|
|
|
bsnLinkTestLocalRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Local RSSI of the link."
|
|
::= { bsnLinkTestEntry 8 }
|
|
|
|
bsnLinkTestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inprogress(1),
|
|
complete(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Status of the link test."
|
|
::= { bsnLinkTestEntry 9 }
|
|
|
|
bsnLinkTestRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnLinkTestEntry 30 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnMobility
|
|
-- ********************************************************************
|
|
|
|
bsnMobilityConfig OBJECT IDENTIFIER
|
|
::= { bsnMobility 1 }
|
|
|
|
bsnMobilityStats OBJECT IDENTIFIER
|
|
::= { bsnMobility 2 }
|
|
|
|
|
|
bsnMobilityProtocolPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Number on which mobility Protocol runs"
|
|
DEFVAL { 0 }
|
|
::= { bsnMobilityConfig 1 }
|
|
|
|
bsnMobilityDynamicDiscovery OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statically Configured is always enabled if members are
|
|
defined. To further enable rrm discovery, learned
|
|
discovery, broadcast discovery, enable/disable this
|
|
attribute."
|
|
::= { bsnMobilityConfig 3 }
|
|
|
|
bsnMobilityStatsReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
resetNow(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset mobility statistics by setting this atribute to
|
|
resetNow. If you try to read this attribute value will
|
|
always be 0."
|
|
::= { bsnMobilityConfig 4 }
|
|
-- ********************************************************************
|
|
-- * bsnMobilityGroupMembersTable
|
|
-- ********************************************************************
|
|
|
|
bsnMobilityGroupMembersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobilityGroupMembersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MWAR List (statically configured members of the mobility
|
|
group)"
|
|
::= { bsnMobilityConfig 10 }
|
|
|
|
bsnMobilityGroupMembersEntry OBJECT-TYPE
|
|
SYNTAX BsnMobilityGroupMembersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the bsnMobilityGroupMembers
|
|
Table."
|
|
INDEX { bsnMobilityGroupMemberMacAddress }
|
|
::= { bsnMobilityGroupMembersTable 1 }
|
|
|
|
BsnMobilityGroupMembersEntry ::= SEQUENCE {
|
|
bsnMobilityGroupMemberMacAddress MacAddress,
|
|
bsnMobilityGroupMemberIPAddress IpAddress,
|
|
bsnMobilityGroupMemberGroupName DisplayString,
|
|
bsnMobilityGroupMemberRowStatus RowStatus
|
|
}
|
|
|
|
bsnMobilityGroupMemberMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Member switch MAC Address"
|
|
::= { bsnMobilityGroupMembersEntry 1 }
|
|
|
|
bsnMobilityGroupMemberIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Member switch IP Address"
|
|
::= { bsnMobilityGroupMembersEntry 2 }
|
|
|
|
bsnMobilityGroupMemberGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Member's group name. If left empty while adding a new group
|
|
member, this assumes the default mobility group name of the
|
|
switch."
|
|
::= { bsnMobilityGroupMembersEntry 3 }
|
|
|
|
bsnMobilityGroupMemberRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnMobilityGroupMembersEntry 22 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * bsnMobilityAnchorsTable
|
|
-- ********************************************************************
|
|
|
|
bsnMobilityAnchorsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobilityAnchorsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statically configured mobility anchors"
|
|
::= { bsnMobilityConfig 11 }
|
|
|
|
bsnMobilityAnchorsEntry OBJECT-TYPE
|
|
SYNTAX BsnMobilityAnchorsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the bsnMobilityAnchorsTable
|
|
Table."
|
|
INDEX {
|
|
bsnMobilityAnchorWlanSsid,
|
|
bsnMobilityAnchorSwitchIPAddress
|
|
}
|
|
::= { bsnMobilityAnchorsTable 1 }
|
|
|
|
BsnMobilityAnchorsEntry ::= SEQUENCE {
|
|
bsnMobilityAnchorWlanSsid DisplayString,
|
|
bsnMobilityAnchorSwitchIPAddress IpAddress,
|
|
bsnMobilityAnchorRowStatus RowStatus
|
|
}
|
|
|
|
bsnMobilityAnchorWlanSsid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local wlan-ssid to connect to Guest/Anchor switch"
|
|
::= { bsnMobilityAnchorsEntry 1 }
|
|
|
|
bsnMobilityAnchorSwitchIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Guest/Anchor switch IP Address"
|
|
::= { bsnMobilityAnchorsEntry 2 }
|
|
|
|
bsnMobilityAnchorRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { bsnMobilityAnchorsEntry 20 }
|
|
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnMobilityStats
|
|
-- ********************************************************************
|
|
|
|
bsnTotalHandoffRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total handoff requests"
|
|
::= { bsnMobilityStats 1 }
|
|
|
|
bsnTotalHandoffs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total handoffs"
|
|
::= { bsnMobilityStats 2 }
|
|
|
|
bsnCurrentExportedClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current exported client count"
|
|
::= { bsnMobilityStats 3 }
|
|
|
|
bsnTotalExportedClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total exported client count"
|
|
::= { bsnMobilityStats 4 }
|
|
|
|
bsnCurrentImportedClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Imported client count"
|
|
::= { bsnMobilityStats 5 }
|
|
|
|
bsnTotalImportedClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Imported client count"
|
|
::= { bsnMobilityStats 6 }
|
|
|
|
bsnTotalHandoffErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total handoff errors"
|
|
::= { bsnMobilityStats 7 }
|
|
|
|
bsnTotalCommunicationErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total communication errors"
|
|
::= { bsnMobilityStats 8 }
|
|
|
|
bsnTotalReceiveErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total receive errors"
|
|
::= { bsnMobilityStats 10 }
|
|
|
|
bsnTotalTransmitErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Transmit errors"
|
|
::= { bsnMobilityStats 11 }
|
|
|
|
bsnTotalResponsesRetransmitted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Responses Retransmitted"
|
|
::= { bsnMobilityStats 12 }
|
|
|
|
bsnTotalHandoffEndRequestsReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoff End Requests Received"
|
|
::= { bsnMobilityStats 13 }
|
|
|
|
bsnTotalStateTransitionsDisallowed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total State Transitions Disallowed"
|
|
::= { bsnMobilityStats 14 }
|
|
|
|
bsnTotalResourceErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Resource Errors"
|
|
::= { bsnMobilityStats 15 }
|
|
|
|
bsnTotalHandoffRequestsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoff Requests Sent"
|
|
::= { bsnMobilityStats 16 }
|
|
|
|
bsnTotalHandoffRepliesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoff Replies Received"
|
|
::= { bsnMobilityStats 17 }
|
|
|
|
bsnTotalHandoffAsLocalReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoffs As Local Received"
|
|
::= { bsnMobilityStats 18 }
|
|
|
|
bsnTotalHandoffAsForeignReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoffs As Foreign Received"
|
|
::= { bsnMobilityStats 19 }
|
|
|
|
bsnTotalHandoffDeniesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoff Denies Received"
|
|
::= { bsnMobilityStats 20 }
|
|
|
|
bsnTotalAnchorRequestsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Anchor Requests Sent"
|
|
::= { bsnMobilityStats 21 }
|
|
|
|
bsnTotalAnchorDenyReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Anchor Deny Received"
|
|
::= { bsnMobilityStats 22 }
|
|
|
|
bsnTotalAnchorGrantReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Anchor Grant Received"
|
|
::= { bsnMobilityStats 23 }
|
|
|
|
bsnTotalAnchorTransferReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Anchor Transfer Received"
|
|
::= { bsnMobilityStats 24 }
|
|
|
|
bsnTotalHandoffRequestsIgnored OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoff Requests Ignored"
|
|
::= { bsnMobilityStats 25 }
|
|
|
|
bsnTotalPingPongHandoffRequestsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Ping Pong Handoff Requests Dropped"
|
|
::= { bsnMobilityStats 26 }
|
|
|
|
bsnTotalHandoffRequestsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoff Requests Dropped"
|
|
::= { bsnMobilityStats 27 }
|
|
|
|
bsnTotalHandoffRequestsDenied OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoff Requests Denied"
|
|
::= { bsnMobilityStats 28 }
|
|
|
|
bsnTotalClientHandoffAsLocal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Client Handoffs As Local"
|
|
::= { bsnMobilityStats 29 }
|
|
|
|
bsnTotalClientHandoffAsForeign OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Client Handoffs As Foreign"
|
|
::= { bsnMobilityStats 30 }
|
|
|
|
bsnTotalAnchorRequestsReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Anchor Requests Received"
|
|
::= { bsnMobilityStats 31 }
|
|
|
|
bsnTotalAnchorRequestsDenied OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Anchor Requests Denied"
|
|
::= { bsnMobilityStats 32 }
|
|
|
|
bsnTotalAnchorRequestsGranted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Anchor Requests Granted"
|
|
::= { bsnMobilityStats 33 }
|
|
|
|
bsnTotalAnchorTransferred OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Anchor Transferred"
|
|
::= { bsnMobilityStats 34 }
|
|
|
|
bsnTotalHandoffRequestsReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Handoff Requests Received"
|
|
::= { bsnMobilityStats 35 }
|
|
-- ********************************************************************
|
|
-- * bsnMobilityGroupDirectoryTable
|
|
-- ********************************************************************
|
|
|
|
bsnMobilityGroupDirectoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnMobilityGroupDirectoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MWAR List (statically configured members of the mobility
|
|
group)"
|
|
::= { bsnMobilityStats 9 }
|
|
|
|
bsnMobilityGroupDirectoryEntry OBJECT-TYPE
|
|
SYNTAX BsnMobilityGroupDirectoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry (conceptual row) in the bsnMobilityGroupDirectory
|
|
Table."
|
|
INDEX { bsnGroupDirectoryMemberMacAddress }
|
|
::= { bsnMobilityGroupDirectoryTable 1 }
|
|
|
|
BsnMobilityGroupDirectoryEntry ::= SEQUENCE {
|
|
bsnGroupDirectoryMemberIPAddress IpAddress,
|
|
bsnGroupDirectoryMemberMacAddress MacAddress,
|
|
bsnGroupDirectoryDicoveryType INTEGER,
|
|
bsnMemberCurrentAnchoredClients Counter32,
|
|
bsnMemberTotalAnchoredClients Counter32,
|
|
bsnMemberCurrentExportedClients Counter32,
|
|
bsnMemberTotalExportedClients Counter32,
|
|
bsnMemberCurrentImportedClients Counter32,
|
|
bsnMemberTotalImportedClients Counter32,
|
|
bsnMemberTotalHandoffErrors Counter32,
|
|
bsnMemberTotalCommunicationErrors Counter32
|
|
}
|
|
|
|
bsnGroupDirectoryMemberIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mwar Ip Address"
|
|
::= { bsnMobilityGroupDirectoryEntry 1 }
|
|
|
|
bsnGroupDirectoryMemberMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mwar Mac Address"
|
|
::= { bsnMobilityGroupDirectoryEntry 2 }
|
|
|
|
bsnGroupDirectoryDicoveryType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
rrm(2),
|
|
broadcast(3),
|
|
learned(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Discovery type of the Group Directory."
|
|
::= { bsnMobilityGroupDirectoryEntry 3 }
|
|
|
|
bsnMemberCurrentAnchoredClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current anchored client count"
|
|
::= { bsnMobilityGroupDirectoryEntry 4 }
|
|
|
|
bsnMemberTotalAnchoredClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total anchored client count"
|
|
::= { bsnMobilityGroupDirectoryEntry 5 }
|
|
|
|
bsnMemberCurrentExportedClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current exported client count"
|
|
::= { bsnMobilityGroupDirectoryEntry 6 }
|
|
|
|
bsnMemberTotalExportedClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total exported client count"
|
|
::= { bsnMobilityGroupDirectoryEntry 7 }
|
|
|
|
bsnMemberCurrentImportedClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Imported client count"
|
|
::= { bsnMobilityGroupDirectoryEntry 8 }
|
|
|
|
bsnMemberTotalImportedClients OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Imported client count"
|
|
::= { bsnMobilityGroupDirectoryEntry 9 }
|
|
|
|
bsnMemberTotalHandoffErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total handoff errors"
|
|
::= { bsnMobilityGroupDirectoryEntry 10 }
|
|
|
|
bsnMemberTotalCommunicationErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Communication errors"
|
|
::= { bsnMobilityGroupDirectoryEntry 30 }
|
|
|
|
|
|
bsnAPGroupsVlanConfig OBJECT IDENTIFIER
|
|
::= { bsnWireless 10 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- Airespace Site Specific WLAN Configuration Paramaters
|
|
-- DEFINED AS "The bsnAPGroupsVlanConfig object provides all the
|
|
-- configuration and monitoring of Site Specific WLAN ";
|
|
-- ********************************************************************
|
|
|
|
bsnAPGroupsVlanFeature OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, Site Specific WLAN feature is enforced."
|
|
::= { bsnAPGroupsVlanConfig 1 }
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPGroupsVlanTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPGroupsVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPGroupsVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless Sites Table."
|
|
::= { bsnAPGroupsVlanConfig 2 }
|
|
|
|
bsnAPGroupsVlanEntry OBJECT-TYPE
|
|
SYNTAX BsnAPGroupsVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in bsnAPGroupsVlanTable."
|
|
INDEX { bsnAPGroupsVlanName }
|
|
::= { bsnAPGroupsVlanTable 1 }
|
|
|
|
BsnAPGroupsVlanEntry ::= SEQUENCE {
|
|
bsnAPGroupsVlanName OCTET STRING,
|
|
bsnAPGroupsVlanDescription OCTET STRING,
|
|
bsnAPGroupsVlanRowStatus RowStatus
|
|
}
|
|
|
|
bsnAPGroupsVlanName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string is an unique identifier/name assigned to a site."
|
|
::= { bsnAPGroupsVlanEntry 1 }
|
|
|
|
bsnAPGroupsVlanDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description about the site."
|
|
::= { bsnAPGroupsVlanEntry 2 }
|
|
|
|
bsnAPGroupsVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for creation/deletion of entries in
|
|
bsnAPGroupsVlanTable"
|
|
::= { bsnAPGroupsVlanEntry 20 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Begin of bsnAPGroupsVlanMappingTable
|
|
-- ********************************************************************
|
|
|
|
bsnAPGroupsVlanMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsnAPGroupsVlanMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table for the WLAN-interace-mappings allowed for each
|
|
configured site. Each site can have a set of WLANs associated
|
|
with it."
|
|
::= { bsnAPGroupsVlanConfig 3 }
|
|
|
|
bsnAPGroupsVlanMappingEntry OBJECT-TYPE
|
|
SYNTAX BsnAPGroupsVlanMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry in bsnAPGroupsVlanMappingTable."
|
|
INDEX {
|
|
bsnAPGroupsVlanName,
|
|
bsnAPGroupsVlanMappingSsid
|
|
}
|
|
::= { bsnAPGroupsVlanMappingTable 1 }
|
|
|
|
BsnAPGroupsVlanMappingEntry ::= SEQUENCE {
|
|
bsnAPGroupsVlanMappingSsid DisplayString,
|
|
bsnAPGroupsVlanMappingInterfaceName OCTET STRING,
|
|
bsnAPGroupsVlanMappingRowStatus RowStatus
|
|
}
|
|
|
|
bsnAPGroupsVlanMappingSsid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"When an AP is associated with a site, and the site
|
|
has an associated set of WLANs, then only those WLANs are
|
|
beamed by the AP. Here 'bsnAPGroupsVlanMappingSsid'
|
|
is the wlan to be used when a client connects on this AP."
|
|
::= { bsnAPGroupsVlanMappingEntry 1 }
|
|
|
|
bsnAPGroupsVlanMappingInterfaceName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"When an AP is associated with a site, and the site
|
|
has an associated set of WLANs, then only those WLANs are
|
|
beamed by the AP. Here 'bsnAPGroupsVlanMappingInterfaceName'
|
|
is the interface to be used when a client connects to the
|
|
'bsnAPGroupsVlanMappingSsid' WLAN on this AP."
|
|
::= { bsnAPGroupsVlanMappingEntry 2 }
|
|
|
|
bsnAPGroupsVlanMappingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Row Status for creation/deletion of WLAN-interface-mappings
|
|
asscoiated with sites."
|
|
::= { bsnAPGroupsVlanMappingEntry 20 }
|
|
|
|
|
|
|
|
bsnAPIPAddressFallback NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnApIpAddress,
|
|
bsnAPStaticIPAddress,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent out when an AP, with the configured static
|
|
ip-address, fails to establish connection with outside world
|
|
and starts using DHCP as a fallback option."
|
|
::= { bsnTraps 77 }
|
|
|
|
bsnAPFunctionalityDisabled NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnApFunctionalityDisableReasonCode,
|
|
bsnLicenseKeyTrapVariable,
|
|
bsnLicenseKeyFeatureSetTrapVariable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent out when AP functionality on the switch is
|
|
disabled because the License key has expired
|
|
or has been deleted or doesn't match the switch image."
|
|
::= { bsnTraps 78 }
|
|
|
|
bsnLicenseKeyTrapVariable OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the license key that has been found to be deleted,
|
|
expired or is mismatched causing AP
|
|
functionality to be disabled on the switch."
|
|
::= { bsnTrapVariable 65 }
|
|
|
|
bsnApFunctionalityDisableReasonCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
licenseKeyExpired(1),
|
|
licenseKeyDeleted(2),
|
|
licenseKeyFeatureMismatch(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the reason why the AP functionality was disabled
|
|
on the switch. It could be either expiry or deletion or
|
|
mismatch found of the license key."
|
|
::= { bsnTrapVariable 66 }
|
|
|
|
bsnLicenseKeyFeatureSetTrapVariable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wps(1),
|
|
all(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the switch feature set whose license key has
|
|
expired or is deleted or is mismatched.
|
|
To enable the AP functionality again, the license key for
|
|
this feature set should be re-configured."
|
|
::= { bsnTrapVariable 67 }
|
|
|
|
bsnRxMulticastQueueFull NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the CPU's Receive Multicast Queue is
|
|
Full."
|
|
::= { bsnTraps 80 }
|
|
|
|
bsnAPAuthorizationFailureCause OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
keymismatch(1),
|
|
entrydoesnotexist(2),
|
|
invalidCertifcate(3),
|
|
entryIsMIC(4),
|
|
aaaEntryDoesNotExist(5)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This denotes the reason for AP authorization failure.
|
|
[entrydoesnotexist]:
|
|
The AP has not been added to Controller's
|
|
AP Authorization List.
|
|
[keymismatch]: The key entry in Controller's AP Authorization
|
|
list does not match the SHA1 key received from
|
|
the AP.
|
|
[invalidCert]: Could not verify the self signed Certificate.
|
|
[entryIsMIC]: AP has Self Signed Certificate where as in
|
|
Controller AP Authorization list has
|
|
Manufactured Installed Certificate
|
|
[aaaEntryDoesNotExist]: RADIUS authorization for the AP failed.
|
|
[unknown]: Default."
|
|
::= { bsnTrapVariable 69 }
|
|
|
|
bsnAPIfUpDownCause OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
radioFailure(1),
|
|
radioLowPower(2),
|
|
maxRetransmission(3),
|
|
echoTimeout(4),
|
|
configAP(5),
|
|
configRadio(6),
|
|
configNetwork(7),
|
|
adminConfigured(8),
|
|
missedRekey(9),
|
|
detectingInLinePower(10),
|
|
newDiscovery(11)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This denotes the reason for AP If up or down
|
|
normal -
|
|
radio Failure - radio failed
|
|
radioLowPower - AP is not able draw enough power.
|
|
maxRetransmission - max retransmission of AP Reached.
|
|
echoTimeout - heartbeat timeout.
|
|
configAP - admin enable/disable AP
|
|
configRadio - admin enable/disable config radio
|
|
configNetwork - admin enable/disable network
|
|
adminConfigured - admin configuration
|
|
missedRekey - Missed Rekey
|
|
detectingInLinePower - Detecting in-line power
|
|
newDiscovery - New Discovery"
|
|
::= { bsnTrapVariable 70 }
|
|
|
|
bsnAPInvalidRadioType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unsupportedRadio(0)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio types which are not supported by controller."
|
|
::= { bsnTrapVariable 71 }
|
|
|
|
locationNotifyContent OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..512))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the content of the notification."
|
|
::= { bsnTrapVariable 72 }
|
|
|
|
bsnSignatureMacInfo OBJECT-TYPE
|
|
SYNTAX BsnTxtSignatureMacInfo
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the pattern followed by the
|
|
LWAPP APs to perform signature analysis with this
|
|
signature and report the results to the
|
|
Controller."
|
|
::= { bsnTrapVariable 73 }
|
|
|
|
bsnRadarChannelDetected NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfPhyChannelNumber,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent when radar signals are detected on the
|
|
current channel"
|
|
::= { bsnTraps 81 }
|
|
|
|
bsnRadarChannelCleared NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfPhyChannelNumber,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will be generated, if a radar trap has been
|
|
generated earlier, after the expiry of Non-Occupancy Period."
|
|
::= { bsnTraps 82 }
|
|
|
|
bsnAPAuthorizationFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPName,
|
|
bsnAPAuthCertificateType,
|
|
bsnAPAuthorizationFailureCause
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent out in case of authorization failure while
|
|
attempting to associate the AP to the controller.
|
|
bsnAPDot3MacAddress represents the mac-address of that AP.
|
|
bsnAPName is name of AP"
|
|
::= { bsnTraps 83 }
|
|
|
|
radioCoreDumpTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When radio module in AP dumps core, it informs controller and
|
|
controller generates this trap. The core file can be retrieved
|
|
on demand."
|
|
::= { bsnTraps 84 }
|
|
|
|
invalidRadioTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPIfSlotId,
|
|
bsnAPInvalidRadioType,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will be generated when an AP has joined is using
|
|
unsupported radio or a radio slot not currently not being
|
|
used."
|
|
::= { bsnTraps 85 }
|
|
|
|
countryChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS { bsnGlobalDot11CountryIndex }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This trap will be generated when an operator changes the
|
|
country of operation. New country code will be sent in trap."
|
|
::= { bsnTraps 86 }
|
|
|
|
unsupportedAPTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will be generated when unsupported AP try to join
|
|
40xx/410x or 3500 with 64MB flash."
|
|
::= { bsnTraps 87 }
|
|
|
|
heartbeatLossTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will be generated when controller loses
|
|
connection with the Supervisor Switch in which it
|
|
is physically embedded and doesn't hear the
|
|
heartbeat keepalives from the Supervisor."
|
|
::= { bsnTraps 88 }
|
|
|
|
locationNotifyTrap NOTIFICATION-TYPE
|
|
OBJECTS { locationNotifyContent }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will be generated by the location server
|
|
for notifications of location events."
|
|
::= { bsnTraps 89 }
|
|
|
|
-- ********************************************************************
|
|
-- * Compliance statements
|
|
-- ********************************************************************
|
|
|
|
bsnWrasCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the bsnWireless module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
bsnEssGroup,
|
|
bsnApGroup,
|
|
bsnGlobalDot11Group,
|
|
bsnRrmGroup,
|
|
bsnAAAGroup,
|
|
bsnTrapsGroup,
|
|
bsnUtilityGroup,
|
|
bsnMobilityGroup,
|
|
bsnIpsecGroup
|
|
}
|
|
::= { bsnWrasCompliances 1 }
|
|
|
|
bsnWrasComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the bsnWireless module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
bsnEssGroupRev1,
|
|
bsnApGroupRev1,
|
|
bsnGlobalDot11GroupRev1,
|
|
bsnRrmGroup,
|
|
bsnAAAGroupRev1,
|
|
bsnTrapsGroupRev1,
|
|
bsnWrasTrapRev1,
|
|
bsnUtilityGroupRev1,
|
|
bsnMobilityGroup,
|
|
bsnIpsecGroup
|
|
}
|
|
::= { bsnWrasCompliances 2 }
|
|
|
|
-- ********************************************************************
|
|
-- * Units of conformance
|
|
-- ********************************************************************
|
|
|
|
bsnEssGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnDot11EssIndex,
|
|
bsnDot11EssSsid,
|
|
bsnDot11EssSessionTimeout,
|
|
bsnDot11EssMacFiltering,
|
|
bsnDot11EssAdminStatus,
|
|
bsnDot11EssSecurityAuthType,
|
|
bsnDot11EssStaticWEPSecurity,
|
|
bsnDot11EssStaticWEPEncryptionType,
|
|
bsnDot11EssStaticWEPDefaultKey,
|
|
bsnDot11EssStaticWEPKeyIndex,
|
|
bsnDot11EssStaticWEPKeyFormat,
|
|
bsnDot11Ess8021xSecurity,
|
|
bsnDot11Ess8021xEncryptionType,
|
|
bsnDot11EssIpsecSecurity,
|
|
bsnDot11EssVpnEncrTransform,
|
|
bsnDot11EssVpnAuthTransform,
|
|
bsnDot11EssVpnIkeAuthMode,
|
|
bsnDot11EssVpnSharedKey,
|
|
bsnDot11EssVpnSharedKeySize,
|
|
bsnDot11EssVpnIkePhase1Mode,
|
|
bsnDot11EssVpnIkeLifetime,
|
|
bsnDot11EssVpnIkeDHGroup,
|
|
bsnDot11EssIpsecPassthruSecurity,
|
|
bsnDot11EssVpnPassthruGateway,
|
|
bsnDot11EssWebSecurity,
|
|
bsnDot11EssRadioPolicy,
|
|
bsnDot11EssQualityOfService,
|
|
bsnDot11EssDhcpRequired,
|
|
bsnDot11EssDhcpServerIpAddress,
|
|
bsnDot11EssVpnContivityMode,
|
|
bsnDot11EssVpnQotdServerAddress,
|
|
bsnDot11EssBlacklistTimeout,
|
|
bsnDot11EssNumberOfMobileStations,
|
|
bsnDot11EssWebPassthru,
|
|
bsnDot11EssCraniteSecurity,
|
|
bsnDot11EssBlacklistingCapability,
|
|
bsnDot11EssInterfaceName,
|
|
bsnDot11EssAclName,
|
|
bsnDot11EssAAAOverride,
|
|
bsnDot11EssWepAllowSharedKeyAuth,
|
|
bsnDot11EssFortressSecurity,
|
|
bsnDot11EssL2tpSecurity,
|
|
bsnDot11EssBroadcastSsid,
|
|
bsnDot11EssExternalPolicyValidation,
|
|
bsnDot11EssIPv6Bridging,
|
|
bsnDot11EssRowStatus,
|
|
bsnDot11EssWmePolicySetting,
|
|
bsnDot11Ess80211ePolicySetting,
|
|
bsnDot11EssWebPassthroughEmail,
|
|
bsnDot11Ess7920PhoneSupport,
|
|
bsnDot11EssRadiusAuthPrimaryServer,
|
|
bsnDot11EssRadiusAuthSecondaryServer,
|
|
bsnDot11EssRadiusAuthTertiaryServer,
|
|
bsnDot11EssRadiusAcctPrimaryServer,
|
|
bsnDot11EssRadiusAcctSecondaryServer,
|
|
bsnDot11EssRadiusAcctTertiaryServer,
|
|
bsnMobileStationMacAddress,
|
|
bsnMobileStationIpAddress,
|
|
bsnMobileStationUserName,
|
|
bsnMobileStationAPMacAddr,
|
|
bsnMobileStationAPIfSlotId,
|
|
bsnMobileStationEssIndex,
|
|
bsnMobileStationSsid,
|
|
bsnMobileStationStatus,
|
|
bsnMobileStationReasonCode,
|
|
bsnMobileStationMobilityStatus,
|
|
bsnMobileStationAID,
|
|
bsnMobileStationAnchorAddress,
|
|
bsnMobileStationCFPollable,
|
|
bsnMobileStationCFPollRequest,
|
|
bsnMobileStationChannelAgilityEnabled,
|
|
bsnMobileStationPBCCOptionImplemented,
|
|
bsnMobileStationShortPreambleOptionImplemented,
|
|
bsnMobileStationSessionTimeout,
|
|
bsnMobileStationAuthenticationAlgorithm,
|
|
bsnMobileStationWepState,
|
|
bsnMobileStationPortNumber,
|
|
bsnMobileStationDeleteAction,
|
|
bsnMobileStationPolicyManagerState,
|
|
bsnMobileStationSecurityPolicyStatus,
|
|
bsnMobileStationProtocol,
|
|
bsnMobileStationMirrorMode,
|
|
bsnMobileStationInterface,
|
|
bsnMobileStationApMode,
|
|
bsnMobileStationVlanId,
|
|
bsnMobileStationPolicyType,
|
|
bsnMobileStationEncryptionCypher,
|
|
bsnMobileStationEapType,
|
|
bsnMobileStationCcxVersion,
|
|
bsnMobileStationE2eVersion,
|
|
bsnMobileStationStatusCode,
|
|
bsnMobileStationPerRadioPerVapIndex,
|
|
bsnMobileStationMacAddr,
|
|
bsnMobileStationRSSI,
|
|
bsnMobileStationBytesReceived,
|
|
bsnMobileStationBytesSent,
|
|
bsnMobileStationPolicyErrors,
|
|
bsnMobileStationPacketsReceived,
|
|
bsnMobileStationPacketsSent,
|
|
bsnMobileStationSnr,
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnRogueAPTotalDetectingAPs,
|
|
bsnRogueAPFirstReported,
|
|
bsnRogueAPLastReported,
|
|
bsnRogueAPContainmentLevel,
|
|
bsnRogueAPType,
|
|
bsnRogueAPOnNetwork,
|
|
bsnRogueAPTotalClients,
|
|
bsnRogueAPRowStatus,
|
|
bsnRogueAPMaxDetectedRSSI,
|
|
bsnRogueAPSSID,
|
|
bsnRogueAPState,
|
|
bsnRogueAPAirespaceAPMacAddress,
|
|
bsnRogueAPAirespaceAPSlotId,
|
|
bsnRogueAPRadioType,
|
|
bsnRogueAPAirespaceAPName,
|
|
bsnRogueAPChannelNumber,
|
|
bsnRogueAPSsid,
|
|
bsnRogueAPAirespaceAPRSSI,
|
|
bsnRogueAPContainmentMode,
|
|
bsnRogueAPContainmentChannelCount,
|
|
bsnRogueAPContainmentChannels,
|
|
bsnRogueAPAirespaceAPLastHeard,
|
|
bsnRogueAPAirespaceAPWepMode,
|
|
bsnRogueAPAirespaceAPPreamble,
|
|
bsnRogueAPAirespaceAPWpaMode,
|
|
bsnRogueAPAirespaceAPSNR,
|
|
bsnMobileStationByIpAddress,
|
|
bsnMobileStationByIpMacAddress,
|
|
bsnMobileStationRssiDataApMacAddress,
|
|
bsnMobileStationRssiDataApIfSlotId,
|
|
bsnMobileStationRssiDataApIfType,
|
|
bsnMobileStationRssiDataApName,
|
|
bsnMobileStationRssiData,
|
|
bsnAPIfPhyAntennaIndex,
|
|
bsnMobileStationRssiDataLastHeard,
|
|
bsnMobileStationByUserName,
|
|
bsnMobileStationByUserMacAddress,
|
|
bsnRogueClientAirespaceAPMacAddress,
|
|
bsnRogueClientAirespaceAPSlotId,
|
|
bsnRogueClientRadioType,
|
|
bsnRogueClientAirespaceAPName,
|
|
bsnRogueClientChannelNumber,
|
|
bsnRogueClientAirespaceAPRSSI,
|
|
bsnRogueClientAirespaceAPLastHeard,
|
|
bsnRogueClientAirespaceAPSNR,
|
|
bsnRogueClientTotalDetectingAPs,
|
|
bsnRogueClientFirstReported,
|
|
bsnRogueClientLastReported,
|
|
bsnRogueClientBSSID,
|
|
bsnRogueClientContainmentLevel,
|
|
bsnRogueClientLastHeard,
|
|
bsnRogueClientState,
|
|
bsnRogueAPDot11MacAddr,
|
|
bsnRogueClientDot11MacAddr,
|
|
bsnDot11QosProfileName,
|
|
bsnDot11QosProfileDesc,
|
|
bsnDot11QosAverageDataRate,
|
|
bsnDot11QosBurstDataRate,
|
|
bsnDot11QosAvgRealTimeDataRate,
|
|
bsnDot11QosBurstRealTimeDataRate,
|
|
bsnDot11QosMaxRFUsagePerAP,
|
|
bsnDot11QosProfileQueueDepth,
|
|
bsnDot11WiredQosProtocol,
|
|
bsnDot11802Dot1PTag,
|
|
bsnDot11ResetProfileToDefault,
|
|
bsnTagDot11MacAddress,
|
|
bsnTagType,
|
|
bsnTagTimeInterval,
|
|
bsnTagBatteryStatus,
|
|
bsnTagLastReported,
|
|
bsnTagRssiDataApMacAddress,
|
|
bsnTagRssiDataApIfSlotId,
|
|
bsnTagRssiDataApIfType,
|
|
bsnTagRssiDataApName,
|
|
bsnTagRssiDataLastHeard,
|
|
bsnTagRssiData,
|
|
bsnTagRssiDataSnr,
|
|
bsnTagBytesReceived,
|
|
bsnTagPacketsReceived
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This collection of objects provides information
|
|
about Airespace Wireless LAN Configuration Attributes
|
|
These objects are defined under bsnEss object."
|
|
::= { bsnWrasGroups 1 }
|
|
|
|
bsnApGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPNumOfSlots,
|
|
bsnAPName,
|
|
bsnAPLocation,
|
|
bsnAPMonitorOnlyMode,
|
|
bsnAPOperationStatus,
|
|
bsnAPSoftwareVersion,
|
|
bsnAPBootVersion,
|
|
bsnAPPrimaryMwarName,
|
|
bsnAPReset,
|
|
bsnAPStatsTimer,
|
|
bsnAPPortNumber,
|
|
bsnAPModel,
|
|
bsnAPSerialNumber,
|
|
bsnAPClearConfig,
|
|
bsnApIpAddress,
|
|
bsnAPMirrorMode,
|
|
bsnAPRemoteModeSupport,
|
|
bsnAPType,
|
|
bsnAPSecondaryMwarName,
|
|
bsnAPTertiaryMwarName,
|
|
bsnAPIsStaticIP,
|
|
bsnAPNetmask,
|
|
bsnAPGateway,
|
|
bsnAPStaticIPAddress,
|
|
bsnAPBridgingSupport,
|
|
bsnAPGroupVlanName,
|
|
bsnAPIOSVersion,
|
|
bsnAPCertificateType,
|
|
bsnAPEthernetMacAddress,
|
|
bsnAPAdminStatus,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfType,
|
|
bsnAPIfPhyChannelAssignment,
|
|
bsnAPIfPhyChannelNumber,
|
|
bsnAPIfPhyTxPowerControl,
|
|
bsnAPIfPhyTxPowerLevel,
|
|
bsnAPIfPhyAntennaMode,
|
|
bsnAPIfPhyAntennaType,
|
|
bsnAPIfPhyAntennaDiversity,
|
|
bsnAPIfCellSiteConfigId,
|
|
bsnAPIfNumberOfVaps,
|
|
bsnAPIfOperStatus,
|
|
bsnAPIfPortNumber,
|
|
bsnAPIfPhyAntennaOptions,
|
|
bsnApIfNoOfUsers,
|
|
bsnAPIfWlanOverride,
|
|
bsnAPIfPacketsSniffingFeature,
|
|
bsnAPIfSniffChannel,
|
|
bsnAPIfSniffServerIPAddress,
|
|
bsnAPIfAntennaGain,
|
|
bsnAPIfChannelList,
|
|
bsnAPIfAbsolutePowerList,
|
|
bsnAPIfRegulatoryDomainSupport,
|
|
bsnAPIfAdminStatus,
|
|
bsnAPIfDot11BeaconPeriod,
|
|
bsnAPIfDot11MediumOccupancyLimit,
|
|
bsnAPIfDot11CFPPeriod,
|
|
bsnAPIfDot11CFPMaxDuration,
|
|
bsnAPIfDot11OperationalRateSet,
|
|
bsnAPIfDot11DTIMPeriod,
|
|
bsnAPIfDot11MultiDomainCapabilityImplemented,
|
|
bsnAPIfDot11MultiDomainCapabilityEnabled,
|
|
bsnAPIfDot11CountryString,
|
|
bsnAPIfDot11SmtParamsConfigType,
|
|
bsnAPIfDot11BSSID,
|
|
bsnAPIfDot11MaximumTransmitPowerLevel,
|
|
bsnAPIfDot11FirstChannelNumber,
|
|
bsnAPIfDot11NumberofChannels,
|
|
bsnAPIfDot11MacRTSThreshold,
|
|
bsnAPIfDot11MacShortRetryLimit,
|
|
bsnAPIfDot11MacLongRetryLimit,
|
|
bsnAPIfDot11MacFragmentationThreshold,
|
|
bsnAPIfDot11MacMaxTransmitMSDULifetime,
|
|
bsnAPIfDot11MacParamsConfigType,
|
|
bsnAPIfDot11MacMaxReceiveLifetime,
|
|
bsnAPIfDot11TransmittedFragmentCount,
|
|
bsnAPIfDot11MulticastTransmittedFrameCount,
|
|
bsnAPIfDot11RetryCount,
|
|
bsnAPIfDot11MultipleRetryCount,
|
|
bsnAPIfDot11FrameDuplicateCount,
|
|
bsnAPIfDot11RTSSuccessCount,
|
|
bsnAPIfDot11RTSFailureCount,
|
|
bsnAPIfDot11ACKFailureCount,
|
|
bsnAPIfDot11ReceivedFragmentCount,
|
|
bsnAPIfDot11MulticastReceivedFrameCount,
|
|
bsnAPIfDot11FCSErrorCount,
|
|
bsnAPIfDot11TransmittedFrameCount,
|
|
bsnAPIfDot11WEPUndecryptableCount,
|
|
bsnAPIfDot11FailedCount,
|
|
bsnAPIfDot11EDThreshold,
|
|
bsnAPIfDot11TIThreshold,
|
|
bsnAPIfProfileParamAssignment,
|
|
bsnAPIfForeignInterferenceThreshold,
|
|
bsnAPIfForeignNoiseThreshold,
|
|
bsnAPIfRFUtilizationThreshold,
|
|
bsnAPIfThroughputThreshold,
|
|
bsnAPIfMobilesThreshold,
|
|
bsnAPIfCoverageThreshold,
|
|
bsnAPIfMobileMinExceptionLevel,
|
|
bsnAPIfCoverageExceptionLevel,
|
|
bsnAPIfLoadRxUtilization,
|
|
bsnAPIfLoadTxUtilization,
|
|
bsnAPIfLoadChannelUtilization,
|
|
bsnAPIfLoadNumOfClients,
|
|
bsnAPIfPoorSNRClients,
|
|
bsnAPIfInterferenceChannelNo,
|
|
bsnAPIfInterferencePower,
|
|
bsnAPIfInterferenceUtilization,
|
|
bsnAPIfNoiseChannelNo,
|
|
bsnAPIfDBNoisePower,
|
|
bsnAPIfLoadProfileState,
|
|
bsnAPIfInterferenceProfileState,
|
|
bsnAPIfNoiseProfileState,
|
|
bsnAPIfCoverageProfileState,
|
|
bsnAPIfRxNeighborMacAddress,
|
|
bsnAPIfRxNeighborIpAddress,
|
|
bsnAPIfRxNeighborRSSI,
|
|
bsnAPIfRxNeighborSlot,
|
|
bsnAPIfStationRSSICoverageIndex,
|
|
bsnAPIfRSSILevel,
|
|
bsnAPIfStationCountOnRSSI,
|
|
bsnAPIfStationSNRCoverageIndex,
|
|
bsnAPIfSNRLevel,
|
|
bsnAPIfStationCountOnSNR,
|
|
bsnAPIfRecommendedChannelNumber,
|
|
bsnAPIfRecommendedTxPowerLevel,
|
|
bsnAPIfRecommendedRTSThreshold,
|
|
bsnAPIfRecommendedFragmentationThreshold,
|
|
bsnAPIfWlanOverrideId,
|
|
bsnAPIfWlanOverrideSsid,
|
|
bsnAPIfWlanOverrideRowStatus,
|
|
bsnMeshNodeRole,
|
|
bsnMeshNodeGroup,
|
|
bsnMeshNodeBackhaul,
|
|
bsnMeshNodeBackhaulPAP,
|
|
bsnMeshNodeBackhaulRAP,
|
|
bsnMeshNodeDataRate,
|
|
bsnMeshNodeChannel,
|
|
bsnMeshNodeRoutingState,
|
|
bsnMeshNodeMalformedNeighPackets,
|
|
bsnMeshNodePoorNeighSnr,
|
|
bsnMeshNodeBlacklistPackets,
|
|
bsnMeshNodeInsufficientMemory,
|
|
bsnMeshNodeRxNeighReq,
|
|
bsnMeshNodeRxNeighRsp,
|
|
bsnMeshNodeTxNeighReq,
|
|
bsnMeshNodeTxNeighRsp,
|
|
bsnMeshNodeParentChanges,
|
|
bsnMeshNodeNeighTimeout,
|
|
bsnMeshNodeParentMacAddress,
|
|
bsnMeshNodeAPType,
|
|
bsnMeshNodeEthernetBridge,
|
|
bsnMeshNodeHops,
|
|
bsnMeshNeighMacAddress,
|
|
bsnMeshNeighType,
|
|
bsnMeshNeighState,
|
|
bsnMeshNeighSnr,
|
|
bsnMeshNeighSnrUp,
|
|
bsnMeshNeighSnrDown,
|
|
bsnMeshNeighLinkSnr,
|
|
bsnMeshNeighAdjustedEase,
|
|
bsnMeshNeighUnadjustedEase,
|
|
bsnMeshNeighRapEase,
|
|
bsnMeshNeighTxParent,
|
|
bsnMeshNeighRxParent,
|
|
bsnMeshNeighPoorSnr,
|
|
bsnMeshNeighLastUpdate,
|
|
bsnMeshNeighParentChange,
|
|
bsnAPIfRadarDetectedChannelNumber,
|
|
bsnAPIfRadarSignalLastHeard
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace APs that are associated with the Switch.
|
|
These objects are defined under bsnAP object."
|
|
::= { bsnWrasGroups 2 }
|
|
|
|
bsnGlobalDot11Group OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnGlobalDot11PrivacyOptionImplemented,
|
|
bsnGlobalDot11AuthenticationResponseTimeOut,
|
|
bsnGlobalDot11MultiDomainCapabilityImplemented,
|
|
bsnGlobalDot11MultiDomainCapabilityEnabled,
|
|
bsnGlobalDot11CountryIndex,
|
|
bsnGlobalDot11LoadBalancing,
|
|
bsnGlobalDot11RogueTimer,
|
|
bsnPrimaryMwarForAPs,
|
|
bsnRtpProtocolPriority,
|
|
bsnSystemCurrentTime,
|
|
bsnUpdateSystemTime,
|
|
bsnOperatingTemperatureEnvironment,
|
|
bsnSensorTemperature,
|
|
bsnTemperatureAlarmLowLimit,
|
|
bsnTemperatureAlarmHighLimit,
|
|
bsnVirtualGatewayAddress,
|
|
bsnRFMobilityDomainName,
|
|
bsnClientWatchListFeature,
|
|
bsnRogueLocationDiscoveryProtocol,
|
|
bsnRogueAutoContainFeature,
|
|
bsnOverAirProvisionApMode,
|
|
bsnMaximumNumberOfConcurrentLogins,
|
|
bsnAutoContainRoguesAdvertisingSsid,
|
|
bsnAutoContainAdhocNetworks,
|
|
bsnAutoContainTrustedClientsOnRogueAps,
|
|
bsnValidateRogueClientsAgainstAAA,
|
|
bsnSystemTimezoneDelta,
|
|
bsnSystemTimezoneDeltaMinutes,
|
|
bsnAllowAuthorizeApAgainstAAA,
|
|
bsnApFallbackEnabled,
|
|
bsnAppleTalkEnabled,
|
|
bsnPolicyForMisconfiguredAps,
|
|
bsnEncryptionPolicyEnforced,
|
|
bsnPreamblePolicyEnforced,
|
|
bsnDot11ModePolicyEnforced,
|
|
bsnRadioTypePolicyEnforced,
|
|
bsnValidateSsidForTrustedAp,
|
|
bsnAlertIfTrustedApMissing,
|
|
bsnTrustedApEntryExpirationTimeout,
|
|
bsnExcessive80211AssocFailures,
|
|
bsnExcessive80211AuthFailures,
|
|
bsnExcessive8021xAuthFailures,
|
|
bsnExternalPolicyServerFailures,
|
|
bsnExcessiveWebAuthFailures,
|
|
bsnIPTheftORReuse,
|
|
bsnStandardSignaturePrecedence,
|
|
bsnStandardSignatureName,
|
|
bsnStandardSignatureDescription,
|
|
bsnStandardSignatureFrameType,
|
|
bsnStandardSignatureAction,
|
|
bsnStandardSignatureState,
|
|
bsnStandardSignatureFrequency,
|
|
bsnStandardSignatureQuietTime,
|
|
bsnStandardSignatureVersion,
|
|
bsnStandardSignatureConfigType,
|
|
bsnStandardSignatureEnable,
|
|
bsnStandardSignatureMacInfo,
|
|
bsnStandardSignatureMacFreq,
|
|
bsnStandardSignatureRowStatus,
|
|
bsnStandardSignaturePatternIndex,
|
|
bsnStandardSignaturePatternOffset,
|
|
bsnStandardSignaturePatternString,
|
|
bsnStandardSignaturePatternMask,
|
|
bsnStandardSignaturePatternOffSetStart,
|
|
bsnStandardSignaturePatternRowStatus,
|
|
bsnCustomSignaturePrecedence,
|
|
bsnCustomSignatureName,
|
|
bsnCustomSignatureDescription,
|
|
bsnCustomSignatureFrameType,
|
|
bsnCustomSignatureAction,
|
|
bsnCustomSignatureState,
|
|
bsnCustomSignatureFrequency,
|
|
bsnCustomSignatureQuietTime,
|
|
bsnCustomSignatureVersion,
|
|
bsnCustomSignatureConfigType,
|
|
bsnCustomSignatureEnable,
|
|
bsnCustomSignatureMacInfo,
|
|
bsnCustomSignatureMacFreq,
|
|
bsnCustomSignatureRowStatus,
|
|
bsnCustomSignaturePatternIndex,
|
|
bsnCustomSignaturePatternOffset,
|
|
bsnCustomSignaturePatternString,
|
|
bsnCustomSignaturePatternMask,
|
|
bsnCustomSignaturePatternOffSetStart,
|
|
bsnCustomSignaturePatternRowStatus,
|
|
bsnSignatureCheckState,
|
|
bsnRfIdTagStatus,
|
|
bsnRfIdTagDataTimeout,
|
|
bsnRfIdTagAutoTimeoutStatus,
|
|
bsnAPNeighborAuthStatus,
|
|
bsnAPNeighborAuthAlarmThreshold,
|
|
bsnRFNetworkName,
|
|
bsnFastSSIDChangeFeature,
|
|
bsnBridgingZeroTouchConfig,
|
|
bsnBridgingSharedSecretKey,
|
|
bsnGlobalDot11bNetworkStatus,
|
|
bsnGlobalDot11bBeaconPeriod,
|
|
bsnGlobalDot11bDynamicChannelAssignment,
|
|
bsnGlobalDot11bCurrentChannel,
|
|
bsnGlobalDot11bDynamicChannelUpdateInterval,
|
|
bsnGlobalDot11bInputsForDCA,
|
|
bsnGlobalDot11bChannelUpdateCmdInvoke,
|
|
bsnGlobalDot11bChannelUpdateCmdStatus,
|
|
bsnGlobalDot11bDynamicTransmitPowerControl,
|
|
bsnGlobalDot11bDynamicTxPowerControlInterval,
|
|
bsnGlobalDot11bCurrentTxPowerLevel,
|
|
bsnGlobalDot11bInputsForDTP,
|
|
bsnGlobalDot11bPowerUpdateCmdInvoke,
|
|
bsnGlobalDot11bPowerUpdateCmdStatus,
|
|
bsnGlobalDot11bDataRate1Mhz,
|
|
bsnGlobalDot11bDataRate2Mhz,
|
|
bsnGlobalDot11bDataRate5AndHalfMhz,
|
|
bsnGlobalDot11bDataRate11Mhz,
|
|
bsnGlobalDot11bShortPreamble,
|
|
bsnGlobalDot11bDot11gSupport,
|
|
bsnGlobalDot11bDataRate6Mhz,
|
|
bsnGlobalDot11bDataRate9Mhz,
|
|
bsnGlobalDot11bDataRate12Mhz,
|
|
bsnGlobalDot11bDataRate18Mhz,
|
|
bsnGlobalDot11bDataRate24Mhz,
|
|
bsnGlobalDot11bDataRate36Mhz,
|
|
bsnGlobalDot11bDataRate48Mhz,
|
|
bsnGlobalDot11bDataRate54Mhz,
|
|
bsnGlobalDot11bPicoCellMode,
|
|
bsnGlobalDot11bFastRoamingMode,
|
|
bsnGlobalDot11bFastRoamingVoipMinRate,
|
|
bsnGlobalDot11bFastRoamingVoipPercentage,
|
|
bsnGlobalDot11b80211eMaxBandwidth,
|
|
bsnGlobalDot11bDTPCSupport,
|
|
bsnGlobalDot11bMediumOccupancyLimit,
|
|
bsnGlobalDot11bCFPPeriod,
|
|
bsnGlobalDot11bCFPMaxDuration,
|
|
bsnGlobalDot11bCFPollable,
|
|
bsnGlobalDot11bCFPollRequest,
|
|
bsnGlobalDot11bDTIMPeriod,
|
|
bsnGlobalDot11bMaximumTransmitPowerLevel,
|
|
bsnGlobalDot11bFirstChannelNumber,
|
|
bsnGlobalDot11bNumberofChannels,
|
|
bsnGlobalDot11bRTSThreshold,
|
|
bsnGlobalDot11bShortRetryLimit,
|
|
bsnGlobalDot11bLongRetryLimit,
|
|
bsnGlobalDot11bFragmentationThreshold,
|
|
bsnGlobalDot11bMaxTransmitMSDULifetime,
|
|
bsnGlobalDot11bMaxReceiveLifetime,
|
|
bsnGlobalDot11bEDThreshold,
|
|
bsnGlobalDot11bChannelAgilityEnabled,
|
|
bsnGlobalDot11bPBCCOptionImplemented,
|
|
bsnGlobalDot11bShortPreambleOptionImplemented,
|
|
bsnGlobalDot11aNetworkStatus,
|
|
bsnGlobalDot11aLowBandNetwork,
|
|
bsnGlobalDot11aMediumBandNetwork,
|
|
bsnGlobalDot11aHighBandNetwork,
|
|
bsnGlobalDot11aBeaconPeriod,
|
|
bsnGlobalDot11aDynamicChannelAssignment,
|
|
bsnGlobalDot11aCurrentChannel,
|
|
bsnGlobalDot11aDynamicChannelUpdateInterval,
|
|
bsnGlobalDot11aInputsForDCA,
|
|
bsnGlobalDot11aChannelUpdateCmdInvoke,
|
|
bsnGlobalDot11aChannelUpdateCmdStatus,
|
|
bsnGlobalDot11aDynamicTransmitPowerControl,
|
|
bsnGlobalDot11aCurrentTxPowerLevel,
|
|
bsnGlobalDot11aDynamicTxPowerControlInterval,
|
|
bsnGlobalDot11aInputsForDTP,
|
|
bsnGlobalDot11aPowerUpdateCmdInvoke,
|
|
bsnGlobalDot11aPowerUpdateCmdStatus,
|
|
bsnGlobalDot11aDataRate6Mhz,
|
|
bsnGlobalDot11aDataRate9Mhz,
|
|
bsnGlobalDot11aDataRate12Mhz,
|
|
bsnGlobalDot11aDataRate18Mhz,
|
|
bsnGlobalDot11aDataRate24Mhz,
|
|
bsnGlobalDot11aDataRate36Mhz,
|
|
bsnGlobalDot11aDataRate48Mhz,
|
|
bsnGlobalDot11aDataRate54Mhz,
|
|
bsnGlobalDot11aPicoCellMode,
|
|
bsnGlobalDot11aFastRoamingMode,
|
|
bsnGlobalDot11aFastRoamingVoipMinRate,
|
|
bsnGlobalDot11aFastRoamingVoipPercentage,
|
|
bsnGlobalDot11a80211eMaxBandwidth,
|
|
bsnGlobalDot11aDTPCSupport,
|
|
bsnGlobalDot11aMediumOccupancyLimit,
|
|
bsnGlobalDot11aCFPPeriod,
|
|
bsnGlobalDot11aCFPMaxDuration,
|
|
bsnGlobalDot11aCFPollable,
|
|
bsnGlobalDot11aCFPollRequest,
|
|
bsnGlobalDot11aDTIMPeriod,
|
|
bsnGlobalDot11aMaximumTransmitPowerLevel,
|
|
bsnGlobalDot11aFirstChannelNumber,
|
|
bsnGlobalDot11aNumberofChannels,
|
|
bsnGlobalDot11aRTSThreshold,
|
|
bsnGlobalDot11aShortRetryLimit,
|
|
bsnGlobalDot11aLongRetryLimit,
|
|
bsnGlobalDot11aFragmentationThreshold,
|
|
bsnGlobalDot11aMaxTransmitMSDULifetime,
|
|
bsnGlobalDot11aMaxReceiveLifetime,
|
|
bsnGlobalDot11aTIThreshold,
|
|
bsnGlobalDot11aChannelAgilityEnabled,
|
|
bsnGlobalDot11hPowerConstraint,
|
|
bsnGlobalDot11hChannelSwitchEnable,
|
|
bsnGlobalDot11hChannelSwitchMode,
|
|
bsnRrmDot11aGlobalAutomaticGrouping
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace 802.11 standard attributes applied globally.
|
|
These objects are defined under bsnGlobalDot11 object."
|
|
::= { bsnWrasGroups 3 }
|
|
|
|
bsnRrmGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnRrmDot11aGroupLeaderMacAddr,
|
|
bsnRrmIsDot11aGroupLeader,
|
|
bsnRrmDot11aGroupLastUpdateTime,
|
|
bsnRrmDot11aGlobalGroupInterval,
|
|
bsnWrasDot11aPeerMacAddress,
|
|
bsnWrasDot11aPeerIpAddress,
|
|
bsnRrmDot11aForeignInterferenceThreshold,
|
|
bsnRrmDot11aForeignNoiseThreshold,
|
|
bsnRrmDot11aRFUtilizationThreshold,
|
|
bsnRrmDot11aThroughputThreshold,
|
|
bsnRrmDot11aMobilesThreshold,
|
|
bsnRrmDot11aCoverageThreshold,
|
|
bsnRrmDot11aMobileMinExceptionLevel,
|
|
bsnRrmDot11aCoverageExceptionLevel,
|
|
bsnRrmDot11aSignalMeasurementInterval,
|
|
bsnRrmDot11aNoiseMeasurementInterval,
|
|
bsnRrmDot11aLoadMeasurementInterval,
|
|
bsnRrmDot11aCoverageMeasurementInterval,
|
|
bsnRrmDot11aChannelMonitorList,
|
|
bsnRrmDot11aSetFactoryDefault,
|
|
bsnRrmDot11bGlobalAutomaticGrouping,
|
|
bsnRrmDot11bGroupLeaderMacAddr,
|
|
bsnRrmIsDot11bGroupLeader,
|
|
bsnRrmDot11bGroupLastUpdateTime,
|
|
bsnRrmDot11bGlobalGroupInterval,
|
|
bsnWrasDot11bPeerMacAddress,
|
|
bsnWrasDot11bPeerIpAddress,
|
|
bsnRrmDot11bForeignInterferenceThreshold,
|
|
bsnRrmDot11bForeignNoiseThreshold,
|
|
bsnRrmDot11bRFUtilizationThreshold,
|
|
bsnRrmDot11bThroughputThreshold,
|
|
bsnRrmDot11bMobilesThreshold,
|
|
bsnRrmDot11bCoverageThreshold,
|
|
bsnRrmDot11bMobileMinExceptionLevel,
|
|
bsnRrmDot11bCoverageExceptionLevel,
|
|
bsnRrmDot11bSignalMeasurementInterval,
|
|
bsnRrmDot11bNoiseMeasurementInterval,
|
|
bsnRrmDot11bLoadMeasurementInterval,
|
|
bsnRrmDot11bCoverageMeasurementInterval,
|
|
bsnRrmDot11bChannelMonitorList,
|
|
bsnRrmDot11bSetFactoryDefault
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace Radio Resource Management Configuration
|
|
Parameters. These objects are defined under bsnRrm object."
|
|
::= { bsnWrasGroups 4 }
|
|
|
|
bsnAAAGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnRadiusAuthServerIndex,
|
|
bsnRadiusAuthServerAddress,
|
|
bsnRadiusAuthClientServerPortNumber,
|
|
bsnRadiusAuthServerKey,
|
|
bsnRadiusAuthServerStatus,
|
|
bsnRadiusAuthServerKeyFormat,
|
|
bsnRadiusAuthServerRFC3576,
|
|
bsnRadiusAuthServerIPSec,
|
|
bsnRadiusAuthServerIPSecAuth,
|
|
bsnRadiusAuthServerIPSecEncryption,
|
|
bsnRadiusAuthServerIPSecIKEPhase1,
|
|
bsnRadiusAuthServerIPSecIKELifetime,
|
|
bsnRadiusAuthServerIPSecDHGroup,
|
|
bsnRadiusAuthServerNetworkUserConfig,
|
|
bsnRadiusAuthServerMgmtUserConfig,
|
|
bsnRadiusAuthServerRetransmitTimeout,
|
|
bsnRadiusAuthServerKeyWrapKEKkey,
|
|
bsnRadiusAuthServerKeyWrapMACKkey,
|
|
bsnRadiusAuthServerKeyWrapFormat,
|
|
bsnRadiusAuthServerRowStatus,
|
|
bsnRadiusAccServerIndex,
|
|
bsnRadiusAccServerAddress,
|
|
bsnRadiusAccClientServerPortNumber,
|
|
bsnRadiusAccServerKey,
|
|
bsnRadiusAccServerStatus,
|
|
bsnRadiusAccServerKeyFormat,
|
|
bsnRadiusAccServerIPSec,
|
|
bsnRadiusAccServerIPSecAuth,
|
|
bsnRadiusAccServerIPSecEncryption,
|
|
bsnRadiusAccServerIPSecIKEPhase1,
|
|
bsnRadiusAccServerIPSecIKELifetime,
|
|
bsnRadiusAccServerIPSecDHGroup,
|
|
bsnRadiusAccServerNetworkUserConfig,
|
|
bsnRadiusAccServerRetransmitTimeout,
|
|
bsnRadiusAccServerRowStatus,
|
|
bsnRadiusAuthClientRoundTripTime,
|
|
bsnRadiusAuthClientAccessRequests,
|
|
bsnRadiusAuthClientAccessRetransmissions,
|
|
bsnRadiusAuthClientAccessAccepts,
|
|
bsnRadiusAuthClientAccessRejects,
|
|
bsnRadiusAuthClientAccessChallenges,
|
|
bsnRadiusAuthClientMalformedAccessResponses,
|
|
bsnRadiusAuthClientBadAuthenticators,
|
|
bsnRadiusAuthClientPendingRequests,
|
|
bsnRadiusAuthClientTimeouts,
|
|
bsnRadiusAuthClientUnknownTypes,
|
|
bsnRadiusAuthClientPacketsDropped,
|
|
bsnRadiusAccClientRoundTripTime,
|
|
bsnRadiusAccClientRequests,
|
|
bsnRadiusAccClientRetransmissions,
|
|
bsnRadiusAccClientResponses,
|
|
bsnRadiusAccClientMalformedResponses,
|
|
bsnRadiusAccClientBadAuthenticators,
|
|
bsnRadiusAccClientPendingRequests,
|
|
bsnRadiusAccClientTimeouts,
|
|
bsnRadiusAccClientUnknownTypes,
|
|
bsnRadiusAccClientPacketsDropped,
|
|
bsnAclName,
|
|
bsnAclApplyMode,
|
|
bsnAclRowStatus,
|
|
bsnAclRuleIndex,
|
|
bsnAclRuleAction,
|
|
bsnAclRuleDirection,
|
|
bsnAclRuleSourceIpAddress,
|
|
bsnAclRuleSourceIpNetmask,
|
|
bsnAclRuleDestinationIpAddress,
|
|
bsnAclRuleDestinationIpNetmask,
|
|
bsnAclRuleProtocol,
|
|
bsnAclRuleStartSourcePort,
|
|
bsnAclRuleEndSourcePort,
|
|
bsnAclRuleStartDestinationPort,
|
|
bsnAclRuleEndDestinationPort,
|
|
bsnAclRuleDscp,
|
|
bsnAclNewRuleIndex,
|
|
bsnAclRuleRowStatus,
|
|
bsnMacFilterAddress,
|
|
bsnMacFilterWlanId,
|
|
bsnMacFilterInterfaceName,
|
|
bsnMacFilterDescription,
|
|
bsnMacFilterRowStatus,
|
|
bsnLocalNetUserName,
|
|
bsnLocalNetUserWlanId,
|
|
bsnLocalNetUserPassword,
|
|
bsnLocalNetUserDescription,
|
|
bsnLocalNetUserLifetime,
|
|
bsnLocalNetUserStartTime,
|
|
bsnLocalNetUserRemainingTime,
|
|
bsnLocalNetUserRowStatus,
|
|
bsnLocalManagementUserName,
|
|
bsnLocalManagementUserPassword,
|
|
bsnLocalManagementUserAccessMode,
|
|
bsnLocalManagementUserRowStatus,
|
|
bsnBlackListClientMacAddress,
|
|
bsnBlackListClientDescription,
|
|
bsnBlackListClientRowStatus,
|
|
bsnRadiusAuthKeyWrapEnable,
|
|
bsnRadiusAuthCacheCredentialsLocally,
|
|
bsnAAAMacDelimiter,
|
|
bsnAAARadiusCompatibilityMode,
|
|
bsnAAARadiusCallStationIdType,
|
|
bsnAAALocalDatabaseSize,
|
|
bsnAAACurrentLocalDatabaseSize,
|
|
bsnExternalPolicyServerAclName,
|
|
bsnAcceptSelfSignedCertificate,
|
|
bsnSystemClockTime,
|
|
bsnAPAuthMacAddress,
|
|
bsnAPAuthCertificateType,
|
|
bsnAPAuthHashKey,
|
|
bsnAPAuthRowStatus
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace Authentication, Authorization, and
|
|
Accounting Attributes. These objects are defined under
|
|
bsnAAA object."
|
|
::= { bsnWrasGroups 5 }
|
|
|
|
bsnTrapsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnDot11StationTrapControlMask,
|
|
bsnAPTrapControlMask,
|
|
bsnAPProfileTrapControlMask,
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnAPNameTrapVariable,
|
|
bsnAPSlotIdTrapVariable,
|
|
bsnAPChannelNumberTrapVariable,
|
|
bsnAPCoverageThresholdTrapVariable,
|
|
bsnAPCoverageFailedClients,
|
|
bsnAPCoverageTotalClients,
|
|
bsnClientMacAddr,
|
|
bsnClientRssi,
|
|
bsnClientSnr,
|
|
bsnInterferenceEnergyBeforeChannelUpdate,
|
|
bsnInterferenceEnergyAfterChannelUpdate,
|
|
bsnAPPortNumberTrapVariable,
|
|
bsnAPParamUpdateTrapControlMask,
|
|
bsnConfigSaveTrapEnable,
|
|
bsnRADIUSServerTrapEnable,
|
|
bsnAuthenticationFailureTrapEnable,
|
|
bsn80211SecurityTrapControlMask,
|
|
bsnWpsTrapControlEnable,
|
|
bsnAuthFailureUserName,
|
|
bsnAuthFailureUserType,
|
|
bsnRemoteIPv4Address,
|
|
bsnIpsecErrorCount,
|
|
bsnIpsecSPI,
|
|
bsnRemoteUdpPort,
|
|
bsnIkeAuthMethod,
|
|
bsnIkeTotalInitFailures,
|
|
bsnIkeTotalInitNoResponses,
|
|
bsnIkeTotalRespFailures,
|
|
bsnNotifiesSent,
|
|
bsnNotifiesReceived,
|
|
bsnSuiteInitFailures,
|
|
bsnSuiteRespondFailures,
|
|
bsnInitiatorCookie,
|
|
bsnResponderCookie,
|
|
bsnIsakmpInvalidCookies,
|
|
bsnIpsecTrapsMask,
|
|
bsnRogueAPTrapEnable,
|
|
bsnCurrentRadiosCount,
|
|
bsnLicenseRadioCount,
|
|
bsnMaxRogueCount,
|
|
bsnStationMacAddress,
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId,
|
|
bsnUserIpAddress,
|
|
bsnStationReasonCode,
|
|
bsnStationBlacklistingReasonCode,
|
|
bsnStationUserName,
|
|
bsnRogueAPOnWiredNetwork,
|
|
bsnRogueAdhocMode,
|
|
bsnDuplicateIpReportedByAP,
|
|
bsnDuplicateIpTrapVariable,
|
|
bsnDuplicateIpTrapClear,
|
|
bsnNavDosAttackSourceMacAddr,
|
|
bsnWlanIdTrapVariable,
|
|
bsnClearTrapVariable,
|
|
bsnTrustedApEncryptionUsed,
|
|
bsnTrustedApEncryptionRequired,
|
|
bsnTrustedApRadioPolicyUsed,
|
|
bsnNetworkType,
|
|
bsnNetworkState,
|
|
bsnSignatureType,
|
|
bsnSignatureName,
|
|
bsnSignatureDescription,
|
|
bsnSignatureAttackPreced,
|
|
bsnSignatureAttackFrequency,
|
|
bsnSignatureAttackChannel,
|
|
bsnSignatureAttackerMacAddress,
|
|
bsnApRegulatoryDomain,
|
|
bsnImpersonatedAPMacAddr,
|
|
bsnTrustedApPreambleUsed,
|
|
bsnTrustedApPreambleRequired,
|
|
bsnTrustedApRadioPolicyRequired,
|
|
bsnGroupDirectoryMemberIPAddress,
|
|
bsnGroupDirectoryMemberMacAddress,
|
|
bsnGroupDirectoryDicoveryType,
|
|
bsnMemberCurrentAnchoredClients,
|
|
bsnMemberTotalAnchoredClients,
|
|
bsnMemberCurrentExportedClients,
|
|
bsnMemberTotalExportedClients,
|
|
bsnMemberCurrentImportedClients,
|
|
bsnMemberTotalImportedClients,
|
|
bsnMemberTotalHandoffErrors,
|
|
bsnMemberTotalCommunicationErrors,
|
|
bsnAPGroupsVlanFeature,
|
|
bsnAPGroupsVlanName,
|
|
bsnAPGroupsVlanDescription,
|
|
bsnAPGroupsVlanRowStatus,
|
|
bsnAPGroupsVlanMappingSsid,
|
|
bsnAPGroupsVlanMappingInterfaceName,
|
|
bsnAPGroupsVlanMappingRowStatus,
|
|
bsnLicenseKeyTrapVariable,
|
|
bsnApFunctionalityDisableReasonCode,
|
|
bsnLicenseKeyFeatureSetTrapVariable,
|
|
bsnAPAuthorizationFailureCause,
|
|
bsnAPIfUpDownCause,
|
|
bsnAPInvalidRadioType,
|
|
locationNotifyContent,
|
|
bsnSignatureMacInfo
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace Trap Configuration and Trap definition.
|
|
These objects are defined under bsnTrap."
|
|
::= { bsnWrasGroups 6 }
|
|
|
|
bsnUtilityGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnSyslogEnable,
|
|
bsnSyslogRemoteAddress,
|
|
bsnPingTestId,
|
|
bsnPingTestIPAddress,
|
|
bsnPingTestSendCount,
|
|
bsnPingTestReceivedCount,
|
|
bsnPingTestStatus,
|
|
bsnPingTestRowStatus
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace General Utilities such as ping, syslog.
|
|
These objects are defined under bsnUtility."
|
|
::= { bsnWrasGroups 7 }
|
|
|
|
bsnMobilityGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnMobilityProtocolPortNum,
|
|
bsnMobilityDynamicDiscovery,
|
|
bsnMobilityStatsReset,
|
|
bsnMobilityGroupMemberMacAddress,
|
|
bsnMobilityGroupMemberIPAddress,
|
|
bsnMobilityGroupMemberGroupName,
|
|
bsnMobilityGroupMemberRowStatus,
|
|
bsnMobilityAnchorWlanSsid,
|
|
bsnMobilityAnchorSwitchIPAddress,
|
|
bsnMobilityAnchorRowStatus,
|
|
bsnTotalHandoffRequests,
|
|
bsnTotalHandoffs,
|
|
bsnCurrentExportedClients,
|
|
bsnTotalExportedClients,
|
|
bsnCurrentImportedClients,
|
|
bsnTotalImportedClients,
|
|
bsnTotalHandoffErrors,
|
|
bsnTotalCommunicationErrors,
|
|
bsnTotalReceiveErrors,
|
|
bsnTotalTransmitErrors,
|
|
bsnTotalResponsesRetransmitted,
|
|
bsnTotalHandoffEndRequestsReceived,
|
|
bsnTotalStateTransitionsDisallowed,
|
|
bsnTotalResourceErrors,
|
|
bsnTotalHandoffRequestsSent,
|
|
bsnTotalHandoffRepliesReceived,
|
|
bsnTotalHandoffAsLocalReceived,
|
|
bsnTotalHandoffAsForeignReceived,
|
|
bsnTotalHandoffDeniesReceived,
|
|
bsnTotalAnchorRequestsSent,
|
|
bsnTotalAnchorDenyReceived,
|
|
bsnTotalAnchorGrantReceived,
|
|
bsnTotalAnchorTransferReceived,
|
|
bsnTotalHandoffRequestsIgnored,
|
|
bsnTotalPingPongHandoffRequestsDropped,
|
|
bsnTotalHandoffRequestsDropped,
|
|
bsnTotalHandoffRequestsDenied,
|
|
bsnTotalClientHandoffAsLocal,
|
|
bsnTotalClientHandoffAsForeign,
|
|
bsnTotalAnchorRequestsReceived,
|
|
bsnTotalAnchorRequestsDenied,
|
|
bsnTotalAnchorRequestsGranted,
|
|
bsnTotalAnchorTransferred,
|
|
bsnTotalHandoffRequestsReceived
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace Mobility Group Parameters and ststistics.
|
|
These are objects defined under bsnMobility."
|
|
::= { bsnWrasGroups 8 }
|
|
|
|
bsnIpsecGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnWrasIpsecCACertificate,
|
|
bsnWrasIpsecCACertificateUpdate,
|
|
bsnWrasIpsecCertName,
|
|
bsnWrasIpsecCertificateUpdate,
|
|
bsnWrasIpsecCertificate,
|
|
bsnWrasIpsecCertPassword,
|
|
bsnWrasIpsecCertStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace Global IpSec Group. These objects are defined
|
|
under bsnIpsec."
|
|
::= { bsnWrasGroups 9 }
|
|
|
|
bsnWrasDepGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnDot11EssWPASecurity,
|
|
bsnDot11EssWPAEncryptionType,
|
|
bsnDot11EssWPAAuthKeyMgmtMode,
|
|
bsnDot11EssWPAAuthPresharedKey,
|
|
bsnDot11EssWPAAuthPresharedKeyHex,
|
|
bsnDot11EssRSNSecurity,
|
|
bsnDot11EssRSNWPACompatibilityMode,
|
|
bsnDot11EssRSNAllowTKIPClients,
|
|
bsnDot11EssRSNAuthKeyMgmtMode,
|
|
bsnDot11EssRSNAuthPresharedKey,
|
|
bsnDot11EssRSNAuthPresharedKeyHex,
|
|
bsnAPIfDot11NumberSupportedPowerLevels,
|
|
bsnAPIfDot11TxPowerLevel1,
|
|
bsnAPIfDot11TxPowerLevel2,
|
|
bsnAPIfDot11TxPowerLevel3,
|
|
bsnAPIfDot11TxPowerLevel4,
|
|
bsnAPIfDot11TxPowerLevel5,
|
|
bsnAPIfDot11TxPowerLevel6,
|
|
bsnAPIfDot11TxPowerLevel7,
|
|
bsnAPIfDot11TxPowerLevel8,
|
|
bsnAPIfDot11CurrentCCAMode,
|
|
bsnLinkTestId,
|
|
bsnLinkTestMacAddress,
|
|
bsnLinkTestSendPktCount,
|
|
bsnLinkTestSendPktLength,
|
|
bsnLinkTestReceivedPktCount,
|
|
bsnLinkTestClientRSSI,
|
|
bsnLinkTestLocalSNR,
|
|
bsnLinkTestLocalRSSI,
|
|
bsnLinkTestStatus,
|
|
bsnLinkTestRowStatus
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This collection of objects are derprecated in bsnWireless
|
|
module."
|
|
::= { bsnWrasGroups 10 }
|
|
|
|
bsnWrasObsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnUserName,
|
|
bsnUserPassword,
|
|
bsnUserEssIndex,
|
|
bsnUserAccessMode,
|
|
bsnUserType,
|
|
bsnUserInterfaceName,
|
|
bsnUserRowStatus,
|
|
bsnExternalPolicyServerIndex,
|
|
bsnExternalPolicyServerAddress,
|
|
bsnExternalPolicyServerPortNumber,
|
|
bsnExternalPolicyServerKey,
|
|
bsnExternalPolicyServerAdminStatus,
|
|
bsnExternalPolicyServerConnectionStatus,
|
|
bsnExternalPolicyServerRowStatus,
|
|
bsnThirdPartyAPMacAddress,
|
|
bsnThirdPartyAPInterface,
|
|
bsnThirdPartyAPIpAddress,
|
|
bsnThirdPartyAP802Dot1XRequired,
|
|
bsnThirdPartyAPMirrorMode,
|
|
bsnThirdPartyAPRowStatus,
|
|
bsnWatchListClientKey,
|
|
bsnWatchListClientType,
|
|
bsnWatchListClientRowStatus
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This collection of objects are obsoleted in bsnWireless
|
|
module."
|
|
::= { bsnWrasGroups 11 }
|
|
|
|
bsnWrasTrap NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
bsnDot11StationDisassociate,
|
|
bsnDot11StationDeauthenticate,
|
|
bsnDot11StationAuthenticateFail,
|
|
bsnDot11StationAssociateFail,
|
|
bsnDot11StationBlacklisted,
|
|
bsnDot11StationAssociate,
|
|
bsnAPUp,
|
|
bsnAPDown,
|
|
bsnAPAssociated,
|
|
bsnAPDisassociated,
|
|
bsnAPIfUp,
|
|
bsnAPIfDown,
|
|
bsnAPLoadProfileFailed,
|
|
bsnAPNoiseProfileFailed,
|
|
bsnAPInterferenceProfileFailed,
|
|
bsnAPCoverageProfileFailed,
|
|
bsnAPLoadProfileUpdatedToPass,
|
|
bsnAPNoiseProfileUpdatedToPass,
|
|
bsnAPInterferenceProfileUpdatedToPass,
|
|
bsnAPCoverageProfileUpdatedToPass,
|
|
bsnAPCurrentTxPowerChanged,
|
|
bsnAPCurrentChannelChanged,
|
|
bsnRrmDot11aGroupingDone,
|
|
bsnRrmDot11bGroupingDone,
|
|
bsnConfigSaved,
|
|
bsnDot11EssCreated,
|
|
bsnDot11EssDeleted,
|
|
bsnRADIUSServerNotResponding,
|
|
bsnAuthenticationFailure,
|
|
bsnIpsecEspAuthFailureTrap,
|
|
bsnIpsecEspReplayFailureTrap,
|
|
bsnIpsecEspInvalidSpiTrap,
|
|
bsnIpsecIkeNegFailure,
|
|
bsnIpsecSuiteNegFailure,
|
|
bsnIpsecInvalidCookieTrap,
|
|
bsnRogueAPDetected,
|
|
bsnRogueAPRemoved,
|
|
bsnRogueAPDetectedOnWiredNetwork,
|
|
bsnApHasNoRadioCards,
|
|
bsnDuplicateIpAddressReported,
|
|
bsnAPContainedAsARogue,
|
|
bsnNetworkStateChanged,
|
|
bsnSignatureAttackDetected,
|
|
bsnAPRadioCardTxFailure,
|
|
bsnAPRadioCardTxFailureClear,
|
|
bsnAPRadioCardRxFailure,
|
|
bsnAPRadioCardRxFailureClear,
|
|
bsnAPImpersonationDetected,
|
|
bsnAPRegulatoryDomainMismatch,
|
|
bsnTrustedApHasInvalidPreamble,
|
|
bsnRadiosExceedLicenseCount,
|
|
bsnSensedTemperatureTooHigh,
|
|
bsnSensedTemperatureTooLow,
|
|
bsnTemperatureSensorFailure,
|
|
bsnTemperatureSensorClear,
|
|
bsnPOEControllerFailure,
|
|
bsnMaxRogueCountExceeded,
|
|
bsnMaxRogueCountClear,
|
|
bsnApMaxRogueCountExceeded,
|
|
bsnApMaxRogueCountClear,
|
|
bsnApBigNavDosAttack,
|
|
bsnTooManyUnsuccessLoginAttempts,
|
|
bsnWepKeyDecryptError,
|
|
bsnWpaMicErrorCounterActivated,
|
|
bsnAdhocRogueAutoContained,
|
|
bsnRogueApAutoContained,
|
|
bsnTrustedApHasInvalidEncryption,
|
|
bsnTrustedApHasInvalidRadioPolicy,
|
|
bsnTrustedApHasInvalidSsid,
|
|
bsnTrustedApIsMissing,
|
|
bsnAPIPAddressFallback,
|
|
bsnAPFunctionalityDisabled,
|
|
bsnRxMulticastQueueFull,
|
|
bsnRadarChannelDetected,
|
|
bsnRadarChannelCleared,
|
|
bsnAPAuthorizationFailure,
|
|
radioCoreDumpTrap,
|
|
invalidRadioTrap,
|
|
countryChangeTrap,
|
|
unsupportedAPTrap,
|
|
heartbeatLossTrap,
|
|
locationNotifyTrap
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This collection of objects provides all notification
|
|
that Switch need to generate to the Management System."
|
|
::= { bsnWrasGroups 12 }
|
|
|
|
bsnEssGroupRev1 OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnDot11EssIndex,
|
|
bsnDot11EssSsid,
|
|
bsnDot11EssSessionTimeout,
|
|
bsnDot11EssMacFiltering,
|
|
bsnDot11EssAdminStatus,
|
|
bsnDot11EssSecurityAuthType,
|
|
bsnDot11EssStaticWEPSecurity,
|
|
bsnDot11EssStaticWEPEncryptionType,
|
|
bsnDot11EssStaticWEPDefaultKey,
|
|
bsnDot11EssStaticWEPKeyIndex,
|
|
bsnDot11EssStaticWEPKeyFormat,
|
|
bsnDot11Ess8021xSecurity,
|
|
bsnDot11Ess8021xEncryptionType,
|
|
bsnDot11EssIpsecSecurity,
|
|
bsnDot11EssVpnEncrTransform,
|
|
bsnDot11EssVpnAuthTransform,
|
|
bsnDot11EssVpnIkeAuthMode,
|
|
bsnDot11EssVpnSharedKey,
|
|
bsnDot11EssVpnSharedKeySize,
|
|
bsnDot11EssVpnIkePhase1Mode,
|
|
bsnDot11EssVpnIkeLifetime,
|
|
bsnDot11EssVpnIkeDHGroup,
|
|
bsnDot11EssIpsecPassthruSecurity,
|
|
bsnDot11EssVpnPassthruGateway,
|
|
bsnDot11EssWebSecurity,
|
|
bsnDot11EssRadioPolicy,
|
|
bsnDot11EssQualityOfService,
|
|
bsnDot11EssDhcpRequired,
|
|
bsnDot11EssDhcpServerIpAddress,
|
|
bsnDot11EssVpnContivityMode,
|
|
bsnDot11EssVpnQotdServerAddress,
|
|
bsnDot11EssBlacklistTimeout,
|
|
bsnDot11EssNumberOfMobileStations,
|
|
bsnDot11EssWebPassthru,
|
|
bsnDot11EssCraniteSecurity,
|
|
bsnDot11EssBlacklistingCapability,
|
|
bsnDot11EssInterfaceName,
|
|
bsnDot11EssAclName,
|
|
bsnDot11EssAAAOverride,
|
|
bsnDot11EssWepAllowSharedKeyAuth,
|
|
bsnDot11EssFortressSecurity,
|
|
bsnDot11EssL2tpSecurity,
|
|
bsnDot11EssBroadcastSsid,
|
|
bsnDot11EssExternalPolicyValidation,
|
|
bsnDot11EssIPv6Bridging,
|
|
bsnDot11EssRowStatus,
|
|
bsnDot11EssWmePolicySetting,
|
|
bsnDot11Ess80211ePolicySetting,
|
|
bsnDot11EssWebPassthroughEmail,
|
|
bsnDot11Ess7920PhoneSupport,
|
|
bsnDot11EssRadiusAuthPrimaryServer,
|
|
bsnDot11EssRadiusAuthSecondaryServer,
|
|
bsnDot11EssRadiusAuthTertiaryServer,
|
|
bsnDot11EssRadiusAcctPrimaryServer,
|
|
bsnDot11EssRadiusAcctSecondaryServer,
|
|
bsnDot11EssRadiusAcctTertiaryServer,
|
|
bsnMobileStationMacAddress,
|
|
bsnMobileStationIpAddress,
|
|
bsnMobileStationUserName,
|
|
bsnMobileStationAPMacAddr,
|
|
bsnMobileStationAPIfSlotId,
|
|
bsnMobileStationEssIndex,
|
|
bsnMobileStationSsid,
|
|
bsnMobileStationStatus,
|
|
bsnMobileStationReasonCode,
|
|
bsnMobileStationMobilityStatus,
|
|
bsnMobileStationAID,
|
|
bsnMobileStationAnchorAddress,
|
|
bsnMobileStationCFPollable,
|
|
bsnMobileStationCFPollRequest,
|
|
bsnMobileStationChannelAgilityEnabled,
|
|
bsnMobileStationPBCCOptionImplemented,
|
|
bsnMobileStationShortPreambleOptionImplemented,
|
|
bsnMobileStationSessionTimeout,
|
|
bsnMobileStationAuthenticationAlgorithm,
|
|
bsnMobileStationWepState,
|
|
bsnMobileStationPortNumber,
|
|
bsnMobileStationDeleteAction,
|
|
bsnMobileStationPolicyManagerState,
|
|
bsnMobileStationSecurityPolicyStatus,
|
|
bsnMobileStationProtocol,
|
|
bsnMobileStationMirrorMode,
|
|
bsnMobileStationInterface,
|
|
bsnMobileStationApMode,
|
|
bsnMobileStationVlanId,
|
|
bsnMobileStationPolicyType,
|
|
bsnMobileStationEncryptionCypher,
|
|
bsnMobileStationEapType,
|
|
bsnMobileStationCcxVersion,
|
|
bsnMobileStationE2eVersion,
|
|
bsnMobileStationStatusCode,
|
|
bsnMobileStationPerRadioPerVapIndex,
|
|
bsnMobileStationMacAddr,
|
|
bsnMobileStationRSSI,
|
|
bsnMobileStationBytesReceived,
|
|
bsnMobileStationBytesSent,
|
|
bsnMobileStationPolicyErrors,
|
|
bsnMobileStationPacketsReceived,
|
|
bsnMobileStationPacketsSent,
|
|
bsnMobileStationSnr,
|
|
bsnRogueAPDot11MacAddress,
|
|
bsnRogueAPTotalDetectingAPs,
|
|
bsnRogueAPFirstReported,
|
|
bsnRogueAPLastReported,
|
|
bsnRogueAPContainmentLevel,
|
|
bsnRogueAPType,
|
|
bsnRogueAPOnNetwork,
|
|
bsnRogueAPTotalClients,
|
|
bsnRogueAPRowStatus,
|
|
bsnRogueAPMaxDetectedRSSI,
|
|
bsnRogueAPSSID,
|
|
bsnRogueAPState,
|
|
bsnRogueAPDetectingAPRadioType,
|
|
bsnRogueAPDetectingAPMacAddress,
|
|
bsnRogueAPMaxRssiRadioType,
|
|
bsnRogueAPClassType,
|
|
bsnRogueAPChannel,
|
|
bsnRogueAPDetectingAPName,
|
|
bsnRogueAPChannelWidth,
|
|
bsnRogueAPAirespaceAPMacAddress,
|
|
bsnRogueAPAirespaceAPSlotId,
|
|
bsnRogueAPRadioType,
|
|
bsnRogueAPAirespaceAPName,
|
|
bsnRogueAPChannelNumber,
|
|
bsnRogueAPSsid,
|
|
bsnRogueAPAirespaceAPRSSI,
|
|
bsnRogueAPContainmentMode,
|
|
bsnRogueAPContainmentChannelCount,
|
|
bsnRogueAPContainmentChannels,
|
|
bsnRogueAPAirespaceAPLastHeard,
|
|
bsnRogueAPAirespaceAPWepMode,
|
|
bsnRogueAPAirespaceAPPreamble,
|
|
bsnRogueAPAirespaceAPWpaMode,
|
|
bsnRogueAPAirespaceAPSNR,
|
|
bsnMobileStationByIpAddress,
|
|
bsnMobileStationByIpMacAddress,
|
|
bsnMobileStationRssiDataApMacAddress,
|
|
bsnMobileStationRssiDataApIfSlotId,
|
|
bsnMobileStationRssiDataApIfType,
|
|
bsnMobileStationRssiDataApName,
|
|
bsnMobileStationRssiData,
|
|
bsnAPIfPhyAntennaIndex,
|
|
bsnMobileStationRssiDataLastHeard,
|
|
bsnMobileStationByUserName,
|
|
bsnMobileStationByUserMacAddress,
|
|
bsnRogueClientAirespaceAPMacAddress,
|
|
bsnRogueClientAirespaceAPSlotId,
|
|
bsnRogueClientRadioType,
|
|
bsnRogueClientAirespaceAPName,
|
|
bsnRogueClientChannelNumber,
|
|
bsnRogueClientAirespaceAPRSSI,
|
|
bsnRogueClientAirespaceAPLastHeard,
|
|
bsnRogueClientAirespaceAPSNR,
|
|
bsnRogueClientTotalDetectingAPs,
|
|
bsnRogueClientFirstReported,
|
|
bsnRogueClientLastReported,
|
|
bsnRogueClientBSSID,
|
|
bsnRogueClientContainmentLevel,
|
|
bsnRogueClientLastHeard,
|
|
bsnRogueClientState,
|
|
bsnRogueAPDot11MacAddr,
|
|
bsnRogueClientDot11MacAddr,
|
|
bsnDot11QosProfileName,
|
|
bsnDot11QosProfileDesc,
|
|
bsnDot11QosAverageDataRate,
|
|
bsnDot11QosBurstDataRate,
|
|
bsnDot11QosAvgRealTimeDataRate,
|
|
bsnDot11QosBurstRealTimeDataRate,
|
|
bsnDot11QosMaxRFUsagePerAP,
|
|
bsnDot11QosProfileQueueDepth,
|
|
bsnDot11WiredQosProtocol,
|
|
bsnDot11802Dot1PTag,
|
|
bsnDot11ResetProfileToDefault,
|
|
bsnTagDot11MacAddress,
|
|
bsnTagType,
|
|
bsnTagTimeInterval,
|
|
bsnTagBatteryStatus,
|
|
bsnTagLastReported,
|
|
bsnTagRssiDataApMacAddress,
|
|
bsnTagRssiDataApIfSlotId,
|
|
bsnTagRssiDataApIfType,
|
|
bsnTagRssiDataApName,
|
|
bsnTagRssiDataLastHeard,
|
|
bsnTagRssiData,
|
|
bsnTagRssiDataSnr,
|
|
bsnTagBytesReceived,
|
|
bsnTagPacketsReceived
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provides information
|
|
about Airespace Wireless LAN Configuration Attributes
|
|
These objects are defined under bsnEss object."
|
|
::= { bsnWrasGroups 13 }
|
|
|
|
bsnGlobalDot11GroupRev1 OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnGlobalDot11PrivacyOptionImplemented,
|
|
bsnGlobalDot11AuthenticationResponseTimeOut,
|
|
bsnGlobalDot11MultiDomainCapabilityImplemented,
|
|
bsnGlobalDot11MultiDomainCapabilityEnabled,
|
|
bsnGlobalDot11RogueTimer,
|
|
bsnPrimaryMwarForAPs,
|
|
bsnRtpProtocolPriority,
|
|
bsnSystemCurrentTime,
|
|
bsnUpdateSystemTime,
|
|
bsnOperatingTemperatureEnvironment,
|
|
bsnSensorTemperature,
|
|
bsnTemperatureAlarmLowLimit,
|
|
bsnTemperatureAlarmHighLimit,
|
|
bsnVirtualGatewayAddress,
|
|
bsnRFMobilityDomainName,
|
|
bsnClientWatchListFeature,
|
|
bsnRogueLocationDiscoveryProtocol,
|
|
bsnRogueAutoContainFeature,
|
|
bsnOverAirProvisionApMode,
|
|
bsnMaximumNumberOfConcurrentLogins,
|
|
bsnAutoContainRoguesAdvertisingSsid,
|
|
bsnAutoContainAdhocNetworks,
|
|
bsnAutoContainTrustedClientsOnRogueAps,
|
|
bsnValidateRogueClientsAgainstAAA,
|
|
bsnSystemTimezoneDelta,
|
|
bsnSystemTimezoneDeltaMinutes,
|
|
bsnAllowAuthorizeApAgainstAAA,
|
|
bsnApFallbackEnabled,
|
|
bsnAppleTalkEnabled,
|
|
bsnPolicyForMisconfiguredAps,
|
|
bsnEncryptionPolicyEnforced,
|
|
bsnPreamblePolicyEnforced,
|
|
bsnDot11ModePolicyEnforced,
|
|
bsnRadioTypePolicyEnforced,
|
|
bsnValidateSsidForTrustedAp,
|
|
bsnAlertIfTrustedApMissing,
|
|
bsnTrustedApEntryExpirationTimeout,
|
|
bsnExcessive80211AssocFailures,
|
|
bsnExcessive80211AuthFailures,
|
|
bsnExcessive8021xAuthFailures,
|
|
bsnExternalPolicyServerFailures,
|
|
bsnExcessiveWebAuthFailures,
|
|
bsnIPTheftORReuse,
|
|
bsnStandardSignaturePrecedence,
|
|
bsnStandardSignatureName,
|
|
bsnStandardSignatureDescription,
|
|
bsnStandardSignatureFrameType,
|
|
bsnStandardSignatureAction,
|
|
bsnStandardSignatureState,
|
|
bsnStandardSignatureFrequency,
|
|
bsnStandardSignatureQuietTime,
|
|
bsnStandardSignatureVersion,
|
|
bsnStandardSignatureConfigType,
|
|
bsnStandardSignatureEnable,
|
|
bsnStandardSignatureMacInfo,
|
|
bsnStandardSignatureMacFreq,
|
|
bsnStandardSignatureRowStatus,
|
|
bsnStandardSignaturePatternIndex,
|
|
bsnStandardSignaturePatternOffset,
|
|
bsnStandardSignaturePatternString,
|
|
bsnStandardSignaturePatternMask,
|
|
bsnStandardSignaturePatternOffSetStart,
|
|
bsnStandardSignaturePatternRowStatus,
|
|
bsnCustomSignaturePrecedence,
|
|
bsnCustomSignatureName,
|
|
bsnCustomSignatureDescription,
|
|
bsnCustomSignatureFrameType,
|
|
bsnCustomSignatureAction,
|
|
bsnCustomSignatureState,
|
|
bsnCustomSignatureFrequency,
|
|
bsnCustomSignatureQuietTime,
|
|
bsnCustomSignatureVersion,
|
|
bsnCustomSignatureConfigType,
|
|
bsnCustomSignatureEnable,
|
|
bsnCustomSignatureMacInfo,
|
|
bsnCustomSignatureMacFreq,
|
|
bsnCustomSignatureRowStatus,
|
|
bsnCustomSignaturePatternIndex,
|
|
bsnCustomSignaturePatternOffset,
|
|
bsnCustomSignaturePatternString,
|
|
bsnCustomSignaturePatternMask,
|
|
bsnCustomSignaturePatternOffSetStart,
|
|
bsnCustomSignaturePatternRowStatus,
|
|
bsnSignatureCheckState,
|
|
bsnRfIdTagStatus,
|
|
bsnRfIdTagDataTimeout,
|
|
bsnRfIdTagAutoTimeoutStatus,
|
|
bsnAPNeighborAuthStatus,
|
|
bsnAPNeighborAuthAlarmThreshold,
|
|
bsnRFNetworkName,
|
|
bsnFastSSIDChangeFeature,
|
|
bsnBridgingZeroTouchConfig,
|
|
bsnBridgingSharedSecretKey,
|
|
bsnGlobalDot11bNetworkStatus,
|
|
bsnGlobalDot11bBeaconPeriod,
|
|
bsnGlobalDot11bDynamicChannelAssignment,
|
|
bsnGlobalDot11bCurrentChannel,
|
|
bsnGlobalDot11bDynamicChannelUpdateInterval,
|
|
bsnGlobalDot11bInputsForDCA,
|
|
bsnGlobalDot11bChannelUpdateCmdInvoke,
|
|
bsnGlobalDot11bChannelUpdateCmdStatus,
|
|
bsnGlobalDot11bDynamicTransmitPowerControl,
|
|
bsnGlobalDot11bDynamicTxPowerControlInterval,
|
|
bsnGlobalDot11bCurrentTxPowerLevel,
|
|
bsnGlobalDot11bInputsForDTP,
|
|
bsnGlobalDot11bPowerUpdateCmdInvoke,
|
|
bsnGlobalDot11bPowerUpdateCmdStatus,
|
|
bsnGlobalDot11bDataRate1Mhz,
|
|
bsnGlobalDot11bDataRate2Mhz,
|
|
bsnGlobalDot11bDataRate5AndHalfMhz,
|
|
bsnGlobalDot11bDataRate11Mhz,
|
|
bsnGlobalDot11bShortPreamble,
|
|
bsnGlobalDot11bDot11gSupport,
|
|
bsnGlobalDot11bDataRate6Mhz,
|
|
bsnGlobalDot11bDataRate9Mhz,
|
|
bsnGlobalDot11bDataRate12Mhz,
|
|
bsnGlobalDot11bDataRate18Mhz,
|
|
bsnGlobalDot11bDataRate24Mhz,
|
|
bsnGlobalDot11bDataRate36Mhz,
|
|
bsnGlobalDot11bDataRate48Mhz,
|
|
bsnGlobalDot11bDataRate54Mhz,
|
|
bsnGlobalDot11bPicoCellMode,
|
|
bsnGlobalDot11bFastRoamingMode,
|
|
bsnGlobalDot11bFastRoamingVoipMinRate,
|
|
bsnGlobalDot11bFastRoamingVoipPercentage,
|
|
bsnGlobalDot11b80211eMaxBandwidth,
|
|
bsnGlobalDot11bDTPCSupport,
|
|
bsnGlobalDot11bMediumOccupancyLimit,
|
|
bsnGlobalDot11bCFPPeriod,
|
|
bsnGlobalDot11bCFPMaxDuration,
|
|
bsnGlobalDot11bCFPollable,
|
|
bsnGlobalDot11bCFPollRequest,
|
|
bsnGlobalDot11bDTIMPeriod,
|
|
bsnGlobalDot11bRTSThreshold,
|
|
bsnGlobalDot11bShortRetryLimit,
|
|
bsnGlobalDot11bLongRetryLimit,
|
|
bsnGlobalDot11bFragmentationThreshold,
|
|
bsnGlobalDot11bMaxTransmitMSDULifetime,
|
|
bsnGlobalDot11bMaxReceiveLifetime,
|
|
bsnGlobalDot11bEDThreshold,
|
|
bsnGlobalDot11bChannelAgilityEnabled,
|
|
bsnGlobalDot11bPBCCOptionImplemented,
|
|
bsnGlobalDot11bShortPreambleOptionImplemented,
|
|
bsnGlobalDot11aNetworkStatus,
|
|
bsnGlobalDot11aLowBandNetwork,
|
|
bsnGlobalDot11aMediumBandNetwork,
|
|
bsnGlobalDot11aHighBandNetwork,
|
|
bsnGlobalDot11aBeaconPeriod,
|
|
bsnGlobalDot11aDynamicChannelAssignment,
|
|
bsnGlobalDot11aCurrentChannel,
|
|
bsnGlobalDot11aDynamicChannelUpdateInterval,
|
|
bsnGlobalDot11aInputsForDCA,
|
|
bsnGlobalDot11aChannelUpdateCmdInvoke,
|
|
bsnGlobalDot11aChannelUpdateCmdStatus,
|
|
bsnGlobalDot11aDynamicTransmitPowerControl,
|
|
bsnGlobalDot11aCurrentTxPowerLevel,
|
|
bsnGlobalDot11aDynamicTxPowerControlInterval,
|
|
bsnGlobalDot11aInputsForDTP,
|
|
bsnGlobalDot11aPowerUpdateCmdInvoke,
|
|
bsnGlobalDot11aPowerUpdateCmdStatus,
|
|
bsnGlobalDot11aDataRate6Mhz,
|
|
bsnGlobalDot11aDataRate9Mhz,
|
|
bsnGlobalDot11aDataRate12Mhz,
|
|
bsnGlobalDot11aDataRate18Mhz,
|
|
bsnGlobalDot11aDataRate24Mhz,
|
|
bsnGlobalDot11aDataRate36Mhz,
|
|
bsnGlobalDot11aDataRate48Mhz,
|
|
bsnGlobalDot11aDataRate54Mhz,
|
|
bsnGlobalDot11aPicoCellMode,
|
|
bsnGlobalDot11aFastRoamingMode,
|
|
bsnGlobalDot11aFastRoamingVoipMinRate,
|
|
bsnGlobalDot11aFastRoamingVoipPercentage,
|
|
bsnGlobalDot11a80211eMaxBandwidth,
|
|
bsnGlobalDot11aDTPCSupport,
|
|
bsnGlobalDot11aMediumOccupancyLimit,
|
|
bsnGlobalDot11aCFPPeriod,
|
|
bsnGlobalDot11aCFPMaxDuration,
|
|
bsnGlobalDot11aCFPollable,
|
|
bsnGlobalDot11aCFPollRequest,
|
|
bsnGlobalDot11aDTIMPeriod,
|
|
bsnGlobalDot11aRTSThreshold,
|
|
bsnGlobalDot11aShortRetryLimit,
|
|
bsnGlobalDot11aLongRetryLimit,
|
|
bsnGlobalDot11aFragmentationThreshold,
|
|
bsnGlobalDot11aMaxTransmitMSDULifetime,
|
|
bsnGlobalDot11aMaxReceiveLifetime,
|
|
bsnGlobalDot11aTIThreshold,
|
|
bsnGlobalDot11aChannelAgilityEnabled,
|
|
bsnGlobalDot11hPowerConstraint,
|
|
bsnGlobalDot11hChannelSwitchEnable,
|
|
bsnGlobalDot11hChannelSwitchMode,
|
|
bsnRrmDot11aGlobalAutomaticGrouping
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace 802.11 standard attributes applied globally.
|
|
These objects are defined under bsnGlobalDot11 object."
|
|
::= { bsnWrasGroups 14 }
|
|
|
|
bsnAAAGroupRev1 OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnRadiusAuthServerIndex,
|
|
bsnRadiusAuthServerAddress,
|
|
bsnRadiusAuthClientServerPortNumber,
|
|
bsnRadiusAuthServerKey,
|
|
bsnRadiusAuthServerStatus,
|
|
bsnRadiusAuthServerKeyFormat,
|
|
bsnRadiusAuthServerRFC3576,
|
|
bsnRadiusAuthServerIPSec,
|
|
bsnRadiusAuthServerIPSecAuth,
|
|
bsnRadiusAuthServerIPSecEncryption,
|
|
bsnRadiusAuthServerIPSecIKEPhase1,
|
|
bsnRadiusAuthServerIPSecIKELifetime,
|
|
bsnRadiusAuthServerIPSecDHGroup,
|
|
bsnRadiusAuthServerNetworkUserConfig,
|
|
bsnRadiusAuthServerMgmtUserConfig,
|
|
bsnRadiusAuthServerRetransmitTimeout,
|
|
bsnRadiusAuthServerKeyWrapKEKkey,
|
|
bsnRadiusAuthServerKeyWrapMACKkey,
|
|
bsnRadiusAuthServerKeyWrapFormat,
|
|
bsnRadiusAuthServerRowStatus,
|
|
bsnRadiusAccServerIndex,
|
|
bsnRadiusAccServerAddress,
|
|
bsnRadiusAccClientServerPortNumber,
|
|
bsnRadiusAccServerKey,
|
|
bsnRadiusAccServerStatus,
|
|
bsnRadiusAccServerKeyFormat,
|
|
bsnRadiusAccServerIPSec,
|
|
bsnRadiusAccServerIPSecAuth,
|
|
bsnRadiusAccServerIPSecEncryption,
|
|
bsnRadiusAccServerIPSecIKEPhase1,
|
|
bsnRadiusAccServerIPSecIKELifetime,
|
|
bsnRadiusAccServerIPSecDHGroup,
|
|
bsnRadiusAccServerNetworkUserConfig,
|
|
bsnRadiusAccServerRetransmitTimeout,
|
|
bsnRadiusAccServerRowStatus,
|
|
bsnRadiusAuthClientRoundTripTime,
|
|
bsnRadiusAuthClientAccessRequests,
|
|
bsnRadiusAuthClientAccessRetransmissions,
|
|
bsnRadiusAuthClientAccessAccepts,
|
|
bsnRadiusAuthClientAccessRejects,
|
|
bsnRadiusAuthClientAccessChallenges,
|
|
bsnRadiusAuthClientMalformedAccessResponses,
|
|
bsnRadiusAuthClientBadAuthenticators,
|
|
bsnRadiusAuthClientPendingRequests,
|
|
bsnRadiusAuthClientTimeouts,
|
|
bsnRadiusAuthClientUnknownTypes,
|
|
bsnRadiusAuthClientPacketsDropped,
|
|
bsnRadiusAccClientRoundTripTime,
|
|
bsnRadiusAccClientRequests,
|
|
bsnRadiusAccClientRetransmissions,
|
|
bsnRadiusAccClientResponses,
|
|
bsnRadiusAccClientMalformedResponses,
|
|
bsnRadiusAccClientBadAuthenticators,
|
|
bsnRadiusAccClientPendingRequests,
|
|
bsnRadiusAccClientTimeouts,
|
|
bsnRadiusAccClientUnknownTypes,
|
|
bsnRadiusAccClientPacketsDropped,
|
|
bsnAclName,
|
|
bsnAclApplyMode,
|
|
bsnAclRowStatus,
|
|
bsnAclRuleIndex,
|
|
bsnAclRuleAction,
|
|
bsnAclRuleDirection,
|
|
bsnAclRuleSourceIpAddress,
|
|
bsnAclRuleSourceIpNetmask,
|
|
bsnAclRuleDestinationIpAddress,
|
|
bsnAclRuleDestinationIpNetmask,
|
|
bsnAclRuleProtocol,
|
|
bsnAclRuleStartSourcePort,
|
|
bsnAclRuleEndSourcePort,
|
|
bsnAclRuleStartDestinationPort,
|
|
bsnAclRuleEndDestinationPort,
|
|
bsnAclRuleDscp,
|
|
bsnAclNewRuleIndex,
|
|
bsnAclRuleRowStatus,
|
|
bsnMacFilterAddress,
|
|
bsnMacFilterWlanId,
|
|
bsnMacFilterInterfaceName,
|
|
bsnMacFilterDescription,
|
|
bsnMacFilterRowStatus,
|
|
bsnLocalNetUserName,
|
|
bsnLocalNetUserWlanId,
|
|
bsnLocalNetUserPassword,
|
|
bsnLocalNetUserDescription,
|
|
bsnLocalNetUserLifetime,
|
|
bsnLocalNetUserStartTime,
|
|
bsnLocalNetUserRemainingTime,
|
|
bsnLocalNetUserRowStatus,
|
|
bsnLocalManagementUserName,
|
|
bsnLocalManagementUserPassword,
|
|
bsnLocalManagementUserAccessMode,
|
|
bsnLocalManagementUserRowStatus,
|
|
bsnBlackListClientMacAddress,
|
|
bsnBlackListClientDescription,
|
|
bsnBlackListClientRowStatus,
|
|
bsnRadiusAuthKeyWrapEnable,
|
|
bsnAAAMacDelimiter,
|
|
bsnAAARadiusCompatibilityMode,
|
|
bsnAAARadiusCallStationIdType,
|
|
bsnAAALocalDatabaseSize,
|
|
bsnAAACurrentLocalDatabaseSize,
|
|
bsnExternalPolicyServerAclName,
|
|
bsnAcceptSelfSignedCertificate,
|
|
bsnSystemClockTime,
|
|
bsnAPAuthMacAddress,
|
|
bsnAPAuthCertificateType,
|
|
bsnAPAuthHashKey,
|
|
bsnAPAuthRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace Authentication, Authorization, and
|
|
Accounting Attributes. These objects are defined under
|
|
bsnAAA object."
|
|
::= { bsnWrasGroups 15 }
|
|
|
|
bsnTrapsGroupRev1 OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnDot11StationTrapControlMask,
|
|
bsnAPTrapControlMask,
|
|
bsnAPProfileTrapControlMask,
|
|
bsnAPMacAddrTrapVariable,
|
|
bsnAPNameTrapVariable,
|
|
bsnAPSlotIdTrapVariable,
|
|
bsnAPChannelNumberTrapVariable,
|
|
bsnAPCoverageThresholdTrapVariable,
|
|
bsnAPCoverageFailedClients,
|
|
bsnAPCoverageTotalClients,
|
|
bsnClientMacAddr,
|
|
bsnClientRssi,
|
|
bsnClientSnr,
|
|
bsnInterferenceEnergyBeforeChannelUpdate,
|
|
bsnInterferenceEnergyAfterChannelUpdate,
|
|
bsnAPPortNumberTrapVariable,
|
|
bsnAPParamUpdateTrapControlMask,
|
|
bsnConfigSaveTrapEnable,
|
|
bsnRADIUSServerTrapEnable,
|
|
bsnAuthenticationFailureTrapEnable,
|
|
bsn80211SecurityTrapControlMask,
|
|
bsnWpsTrapControlEnable,
|
|
bsnAuthFailureUserName,
|
|
bsnAuthFailureUserType,
|
|
bsnRemoteIPv4Address,
|
|
bsnIpsecErrorCount,
|
|
bsnIpsecSPI,
|
|
bsnRemoteUdpPort,
|
|
bsnIkeAuthMethod,
|
|
bsnIkeTotalInitFailures,
|
|
bsnIkeTotalInitNoResponses,
|
|
bsnIkeTotalRespFailures,
|
|
bsnNotifiesSent,
|
|
bsnNotifiesReceived,
|
|
bsnSuiteInitFailures,
|
|
bsnSuiteRespondFailures,
|
|
bsnInitiatorCookie,
|
|
bsnResponderCookie,
|
|
bsnIsakmpInvalidCookies,
|
|
bsnIpsecTrapsMask,
|
|
bsnRogueAPTrapEnable,
|
|
bsnCurrentRadiosCount,
|
|
bsnLicenseRadioCount,
|
|
bsnMaxRogueCount,
|
|
bsnStationMacAddress,
|
|
bsnStationAPMacAddr,
|
|
bsnStationAPIfSlotId,
|
|
bsnUserIpAddress,
|
|
bsnStationReasonCode,
|
|
bsnStationBlacklistingReasonCode,
|
|
bsnStationUserName,
|
|
bsnRogueAPOnWiredNetwork,
|
|
bsnRogueAdhocMode,
|
|
bsnDuplicateIpReportedByAP,
|
|
bsnDuplicateIpTrapVariable,
|
|
bsnDuplicateIpTrapClear,
|
|
bsnNavDosAttackSourceMacAddr,
|
|
bsnWlanIdTrapVariable,
|
|
bsnClearTrapVariable,
|
|
bsnTrustedApEncryptionUsed,
|
|
bsnTrustedApEncryptionRequired,
|
|
bsnTrustedApRadioPolicyUsed,
|
|
bsnNetworkType,
|
|
bsnNetworkState,
|
|
bsnSignatureType,
|
|
bsnSignatureName,
|
|
bsnSignatureDescription,
|
|
bsnSignatureAttackPreced,
|
|
bsnSignatureAttackFrequency,
|
|
bsnSignatureAttackChannel,
|
|
bsnSignatureAttackerMacAddress,
|
|
bsnApRegulatoryDomain,
|
|
bsnImpersonatedAPMacAddr,
|
|
bsnTrustedApPreambleUsed,
|
|
bsnTrustedApPreambleRequired,
|
|
bsnTrustedApRadioPolicyRequired,
|
|
bsnGroupDirectoryMemberIPAddress,
|
|
bsnGroupDirectoryMemberMacAddress,
|
|
bsnGroupDirectoryDicoveryType,
|
|
bsnMemberCurrentAnchoredClients,
|
|
bsnMemberTotalAnchoredClients,
|
|
bsnMemberCurrentExportedClients,
|
|
bsnMemberTotalExportedClients,
|
|
bsnMemberCurrentImportedClients,
|
|
bsnMemberTotalImportedClients,
|
|
bsnMemberTotalHandoffErrors,
|
|
bsnMemberTotalCommunicationErrors,
|
|
bsnAPGroupsVlanFeature,
|
|
bsnAPGroupsVlanName,
|
|
bsnAPGroupsVlanDescription,
|
|
bsnAPGroupsVlanRowStatus,
|
|
bsnLicenseKeyTrapVariable,
|
|
bsnApFunctionalityDisableReasonCode,
|
|
bsnLicenseKeyFeatureSetTrapVariable,
|
|
bsnAPAuthorizationFailureCause,
|
|
bsnAPIfUpDownCause,
|
|
bsnAPInvalidRadioType,
|
|
locationNotifyContent,
|
|
bsnSignatureMacInfo,
|
|
bsnAPPreviousChannelNumberTrapVariable,
|
|
bsnAPReasonCodeTrapVariable,
|
|
bsnNoiseBeforeChannelUpdate,
|
|
bsnNoiseAfterChannelUpdate,
|
|
bsnInterferenceBeforeChannelUpdate,
|
|
bsnInterferenceAfterChannelUpdate,
|
|
bsnImpersonatingSourceMacAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace Trap Configuration and Trap definition.
|
|
These objects are defined under bsnTrap."
|
|
::= { bsnWrasGroups 16 }
|
|
|
|
bsnWrasTrapRev1 NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
bsnDot11StationDisassociate,
|
|
bsnDot11StationDeauthenticate,
|
|
bsnDot11StationAuthenticateFail,
|
|
bsnDot11StationAssociateFail,
|
|
bsnDot11StationBlacklisted,
|
|
bsnDot11StationAssociate,
|
|
bsnAPDisassociated,
|
|
bsnAPLoadProfileFailed,
|
|
bsnAPNoiseProfileFailed,
|
|
bsnAPInterferenceProfileFailed,
|
|
bsnAPCoverageProfileFailed,
|
|
bsnAPLoadProfileUpdatedToPass,
|
|
bsnAPNoiseProfileUpdatedToPass,
|
|
bsnAPInterferenceProfileUpdatedToPass,
|
|
bsnAPCoverageProfileUpdatedToPass,
|
|
bsnAPCurrentTxPowerChanged,
|
|
bsnAPCurrentChannelChanged,
|
|
bsnRrmDot11aGroupingDone,
|
|
bsnRrmDot11bGroupingDone,
|
|
bsnConfigSaved,
|
|
bsnDot11EssCreated,
|
|
bsnDot11EssDeleted,
|
|
bsnRADIUSServerNotResponding,
|
|
bsnAuthenticationFailure,
|
|
bsnIpsecEspAuthFailureTrap,
|
|
bsnIpsecEspReplayFailureTrap,
|
|
bsnIpsecEspInvalidSpiTrap,
|
|
bsnIpsecIkeNegFailure,
|
|
bsnIpsecSuiteNegFailure,
|
|
bsnIpsecInvalidCookieTrap,
|
|
bsnRogueAPDetected,
|
|
bsnRogueAPRemoved,
|
|
bsnRogueAPDetectedOnWiredNetwork,
|
|
bsnApHasNoRadioCards,
|
|
bsnDuplicateIpAddressReported,
|
|
bsnAPContainedAsARogue,
|
|
bsnNetworkStateChanged,
|
|
bsnSignatureAttackDetected,
|
|
bsnAPRadioCardTxFailure,
|
|
bsnAPRadioCardTxFailureClear,
|
|
bsnAPRadioCardRxFailure,
|
|
bsnAPRadioCardRxFailureClear,
|
|
bsnAPImpersonationDetected,
|
|
bsnTrustedApHasInvalidPreamble,
|
|
bsnRadiosExceedLicenseCount,
|
|
bsnSensedTemperatureTooHigh,
|
|
bsnSensedTemperatureTooLow,
|
|
bsnTemperatureSensorFailure,
|
|
bsnTemperatureSensorClear,
|
|
bsnPOEControllerFailure,
|
|
bsnMaxRogueCountExceeded,
|
|
bsnMaxRogueCountClear,
|
|
bsnApMaxRogueCountExceeded,
|
|
bsnApMaxRogueCountClear,
|
|
bsnApBigNavDosAttack,
|
|
bsnTooManyUnsuccessLoginAttempts,
|
|
bsnWepKeyDecryptError,
|
|
bsnWpaMicErrorCounterActivated,
|
|
bsnAdhocRogueAutoContained,
|
|
bsnRogueApAutoContained,
|
|
bsnTrustedApHasInvalidEncryption,
|
|
bsnTrustedApHasInvalidRadioPolicy,
|
|
bsnTrustedApHasInvalidSsid,
|
|
bsnTrustedApIsMissing,
|
|
bsnAPIPAddressFallback,
|
|
bsnAPFunctionalityDisabled,
|
|
bsnRxMulticastQueueFull,
|
|
bsnRadarChannelDetected,
|
|
bsnRadarChannelCleared,
|
|
bsnAPAuthorizationFailure,
|
|
radioCoreDumpTrap,
|
|
invalidRadioTrap,
|
|
unsupportedAPTrap,
|
|
heartbeatLossTrap,
|
|
locationNotifyTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provides all notification
|
|
that Switch need to generate to the Management System."
|
|
::= { bsnWrasGroups 17 }
|
|
|
|
bsnApGroupRev1 OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnAPDot3MacAddress,
|
|
bsnAPNumOfSlots,
|
|
bsnAPName,
|
|
bsnAPLocation,
|
|
bsnAPMonitorOnlyMode,
|
|
bsnAPOperationStatus,
|
|
bsnAPSoftwareVersion,
|
|
bsnAPBootVersion,
|
|
bsnAPPrimaryMwarName,
|
|
bsnAPReset,
|
|
bsnAPStatsTimer,
|
|
bsnAPPortNumber,
|
|
bsnAPModel,
|
|
bsnAPSerialNumber,
|
|
bsnAPClearConfig,
|
|
bsnApIpAddress,
|
|
bsnAPMirrorMode,
|
|
bsnAPRemoteModeSupport,
|
|
bsnAPType,
|
|
bsnAPSecondaryMwarName,
|
|
bsnAPTertiaryMwarName,
|
|
bsnAPIsStaticIP,
|
|
bsnAPNetmask,
|
|
bsnAPGateway,
|
|
bsnAPStaticIPAddress,
|
|
bsnAPBridgingSupport,
|
|
bsnAPGroupVlanName,
|
|
bsnAPIOSVersion,
|
|
bsnAPCertificateType,
|
|
bsnAPEthernetMacAddress,
|
|
bsnAPAdminStatus,
|
|
bsnAPIfSlotId,
|
|
bsnAPIfType,
|
|
bsnAPIfPhyChannelAssignment,
|
|
bsnAPIfPhyChannelNumber,
|
|
bsnAPIfPhyTxPowerControl,
|
|
bsnAPIfPhyTxPowerLevel,
|
|
bsnAPIfPhyAntennaMode,
|
|
bsnAPIfPhyAntennaType,
|
|
bsnAPIfPhyAntennaDiversity,
|
|
bsnAPIfCellSiteConfigId,
|
|
bsnAPIfNumberOfVaps,
|
|
bsnAPIfOperStatus,
|
|
bsnAPIfPortNumber,
|
|
bsnAPIfPhyAntennaOptions,
|
|
bsnApIfNoOfUsers,
|
|
bsnAPIfWlanOverride,
|
|
bsnAPIfPacketsSniffingFeature,
|
|
bsnAPIfSniffChannel,
|
|
bsnAPIfSniffServerIPAddress,
|
|
bsnAPIfAntennaGain,
|
|
bsnAPIfChannelList,
|
|
bsnAPIfAbsolutePowerList,
|
|
bsnAPIfRegulatoryDomainSupport,
|
|
bsnAPIfAdminStatus,
|
|
bsnAPIfDot11BeaconPeriod,
|
|
bsnAPIfDot11MediumOccupancyLimit,
|
|
bsnAPIfDot11CFPPeriod,
|
|
bsnAPIfDot11CFPMaxDuration,
|
|
bsnAPIfDot11OperationalRateSet,
|
|
bsnAPIfDot11DTIMPeriod,
|
|
bsnAPIfDot11MultiDomainCapabilityImplemented,
|
|
bsnAPIfDot11MultiDomainCapabilityEnabled,
|
|
bsnAPIfDot11CountryString,
|
|
bsnAPIfDot11SmtParamsConfigType,
|
|
bsnAPIfDot11BSSID,
|
|
bsnAPIfDot11MaximumTransmitPowerLevel,
|
|
bsnAPIfDot11FirstChannelNumber,
|
|
bsnAPIfDot11NumberofChannels,
|
|
bsnAPIfDot11MacRTSThreshold,
|
|
bsnAPIfDot11MacShortRetryLimit,
|
|
bsnAPIfDot11MacLongRetryLimit,
|
|
bsnAPIfDot11MacFragmentationThreshold,
|
|
bsnAPIfDot11MacMaxTransmitMSDULifetime,
|
|
bsnAPIfDot11MacParamsConfigType,
|
|
bsnAPIfDot11MacMaxReceiveLifetime,
|
|
bsnAPIfDot11TransmittedFragmentCount,
|
|
bsnAPIfDot11MulticastTransmittedFrameCount,
|
|
bsnAPIfDot11RetryCount,
|
|
bsnAPIfDot11MultipleRetryCount,
|
|
bsnAPIfDot11FrameDuplicateCount,
|
|
bsnAPIfDot11RTSSuccessCount,
|
|
bsnAPIfDot11RTSFailureCount,
|
|
bsnAPIfDot11ACKFailureCount,
|
|
bsnAPIfDot11ReceivedFragmentCount,
|
|
bsnAPIfDot11MulticastReceivedFrameCount,
|
|
bsnAPIfDot11FCSErrorCount,
|
|
bsnAPIfDot11TransmittedFrameCount,
|
|
bsnAPIfDot11WEPUndecryptableCount,
|
|
bsnAPIfDot11FailedCount,
|
|
bsnAPIfDot11EDThreshold,
|
|
bsnAPIfDot11TIThreshold,
|
|
bsnAPIfProfileParamAssignment,
|
|
bsnAPIfForeignInterferenceThreshold,
|
|
bsnAPIfForeignNoiseThreshold,
|
|
bsnAPIfRFUtilizationThreshold,
|
|
bsnAPIfThroughputThreshold,
|
|
bsnAPIfMobilesThreshold,
|
|
bsnAPIfCoverageThreshold,
|
|
bsnAPIfMobileMinExceptionLevel,
|
|
bsnAPIfCoverageExceptionLevel,
|
|
bsnAPIfLoadRxUtilization,
|
|
bsnAPIfLoadTxUtilization,
|
|
bsnAPIfLoadChannelUtilization,
|
|
bsnAPIfLoadNumOfClients,
|
|
bsnAPIfPoorSNRClients,
|
|
bsnAPIfInterferenceChannelNo,
|
|
bsnAPIfInterferencePower,
|
|
bsnAPIfInterferenceUtilization,
|
|
bsnAPIfNoiseChannelNo,
|
|
bsnAPIfDBNoisePower,
|
|
bsnAPIfLoadProfileState,
|
|
bsnAPIfInterferenceProfileState,
|
|
bsnAPIfNoiseProfileState,
|
|
bsnAPIfCoverageProfileState,
|
|
bsnAPIfRxNeighborMacAddress,
|
|
bsnAPIfRxNeighborIpAddress,
|
|
bsnAPIfRxNeighborRSSI,
|
|
bsnAPIfRxNeighborSlot,
|
|
bsnAPIfStationRSSICoverageIndex,
|
|
bsnAPIfRSSILevel,
|
|
bsnAPIfStationCountOnRSSI,
|
|
bsnAPIfStationSNRCoverageIndex,
|
|
bsnAPIfSNRLevel,
|
|
bsnAPIfStationCountOnSNR,
|
|
bsnAPIfRecommendedChannelNumber,
|
|
bsnAPIfRecommendedTxPowerLevel,
|
|
bsnAPIfRecommendedRTSThreshold,
|
|
bsnAPIfRecommendedFragmentationThreshold,
|
|
bsnAPIfWlanOverrideId,
|
|
bsnAPIfWlanOverrideSsid,
|
|
bsnAPIfWlanOverrideRowStatus,
|
|
bsnMeshNodeRole,
|
|
bsnMeshNodeGroup,
|
|
bsnMeshNodeBackhaul,
|
|
bsnMeshNodeBackhaulPAP,
|
|
bsnMeshNodeBackhaulRAP,
|
|
bsnMeshNodeDataRate,
|
|
bsnMeshNodeChannel,
|
|
bsnMeshNodeRoutingState,
|
|
bsnMeshNodeMalformedNeighPackets,
|
|
bsnMeshNodePoorNeighSnr,
|
|
bsnMeshNodeBlacklistPackets,
|
|
bsnMeshNodeInsufficientMemory,
|
|
bsnMeshNodeRxNeighReq,
|
|
bsnMeshNodeRxNeighRsp,
|
|
bsnMeshNodeTxNeighReq,
|
|
bsnMeshNodeTxNeighRsp,
|
|
bsnMeshNodeParentChanges,
|
|
bsnMeshNodeNeighTimeout,
|
|
bsnMeshNodeParentMacAddress,
|
|
bsnMeshNodeAPType,
|
|
bsnMeshNodeEthernetBridge,
|
|
bsnMeshNodeHops,
|
|
bsnMeshNeighMacAddress,
|
|
bsnMeshNeighType,
|
|
bsnMeshNeighState,
|
|
bsnMeshNeighSnr,
|
|
bsnMeshNeighSnrUp,
|
|
bsnMeshNeighSnrDown,
|
|
bsnMeshNeighLinkSnr,
|
|
bsnMeshNeighAdjustedEase,
|
|
bsnMeshNeighUnadjustedEase,
|
|
bsnMeshNeighRapEase,
|
|
bsnMeshNeighTxParent,
|
|
bsnMeshNeighRxParent,
|
|
bsnMeshNeighPoorSnr,
|
|
bsnMeshNeighLastUpdate,
|
|
bsnMeshNeighParentChange,
|
|
bsnAPIfRadarDetectedChannelNumber,
|
|
bsnAPIfRadarSignalLastHeard,
|
|
bsnAPIfRxNeighborChannel,
|
|
bsnAPIfRxNeighborChannelWidth,
|
|
bsnStandardSignatureInterval,
|
|
bsnCustomSignatureInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace APs that are associated with the Switch.
|
|
These objects are defined under bsnAP object."
|
|
::= { bsnWrasGroups 18 }
|
|
|
|
bsnUtilityGroupRev1 OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnSyslogEnable,
|
|
bsnSyslogRemoteAddress,
|
|
bsnPingTestId,
|
|
bsnPingTestIPAddress,
|
|
bsnPingTestSendCount,
|
|
bsnPingTestReceivedCount,
|
|
bsnPingTestStatus,
|
|
bsnPingTestRowStatus,
|
|
bsnPingTestMaxTimeInterval,
|
|
bsnPingTestMinTimeInterval,
|
|
bsnPingTestAvgTimeInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide the information
|
|
about Airespace General Utilities such as ping, syslog.
|
|
These objects are defined under bsnUtility."
|
|
::= { bsnWrasGroups 19 }
|
|
|
|
bsnWrasObsGroupRev1 OBJECT-GROUP
|
|
OBJECTS {
|
|
bsnMobileStationSampleTime,
|
|
bsnMobileStationTxExcessiveRetries,
|
|
bsnMobileStationTxRetries,
|
|
bsnMobileStationTxFiltered,
|
|
bsnSystemTimezoneDaylightSavings
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This collection of objects are obsoleted in bsnWireless
|
|
module."
|
|
::= { bsnWrasGroups 20 }
|
|
|
|
bsnWrasObsTrap NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
bsnAPUp,
|
|
bsnAPDown
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This collection of objects provides all notification
|
|
that Switch need to generate to the Management System."
|
|
::= { bsnWrasGroups 21 }
|
|
|
|
END
|