Configs/MIBs/FORTINET-CORE-MIB.mib

487 lines
14 KiB
Plaintext

--
-- FORTINET-CORE-MIB.mib: Main MIB for Fortinet enterprise OID tree
--
-- MODULE-IDENTITY
-- OrgName
-- Fortinet Technologies, Inc.
-- ContactInfo
-- Technical Support
-- e-mail: support@fortinet.com
-- http://www.fortinet.com
--
FORTINET-CORE-MIB DEFINITIONS ::= BEGIN
IMPORTS
ifIndex
FROM IF-MIB
InetAddress, InetAddressPrefixLength, InetAddressType
FROM INET-ADDRESS-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
FROM SNMPv2-CONF
sysName
FROM SNMPv2-MIB
Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE,
enterprises
FROM SNMPv2-SMI
DisplayString, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
fortinet MODULE-IDENTITY
LAST-UPDATED "201609300000Z"
ORGANIZATION
"Fortinet Technologies, Inc."
CONTACT-INFO
"Technical Support
email: support@fortinet.com
http://www.fortinet.com
"
DESCRIPTION
"Corrected trap number and description of nTrapIfEnterBypassMode/fnTrapIfExitBypassMode Traps "
REVISION "201609300000Z"
DESCRIPTION
"Added fnTrapIfEnterBypassMode/fnTrapIfExitBypassMode Traps "
REVISION "201605240000Z"
DESCRIPTION
"Registered FortiWANMib OIDs"
REVISION "201501140000Z"
DESCRIPTION
"Registered and updated FortiAuthenticatorMib/FortiRecorderMib/FortiVoiceMib/FortiBridgeMib/FortiDirectorMib OIDs"
REVISION "201412100000Z"
DESCRIPTION
"Registered FortiVoiceMib OID"
REVISION "201404100000Z"
DESCRIPTION
"Registered FortiADCMib OID"
REVISION "201403220000Z"
DESCRIPTION
"Added fan failure and AMC bypass traps"
REVISION "201205090000Z"
DESCRIPTION
"Registered FortiDDoSMib OID"
REVISION "201204230000Z"
DESCRIPTION
"Registered FortiDNSMib OID"
REVISION "201112230000Z"
DESCRIPTION
"Registered FortiCacheMib OID"
REVISION "201104250000Z"
DESCRIPTION
"Supporting portuguese language"
REVISION "201005140000Z"
DESCRIPTION
"Registered FortiScanMib OID"
REVISION "200905200000Z"
DESCRIPTION
"MIB module for Fortinet network devices."
REVISION "200811190000Z"
DESCRIPTION
"Registered FortiWebMib OID"
REVISION "200810210000Z"
DESCRIPTION
"Added SMI comments"
REVISION "200806250000Z"
DESCRIPTION
"Adjusted fnAdmin tree to start at .1"
REVISION "200806160000Z"
DESCRIPTION
"Spelling corrections."
REVISION "200804170000Z"
DESCRIPTION
"Initial version of fortinet core MIB."
::= { enterprises 12356 } -- assigned by IANA
--
-- Fortinet MIB Textual Conventions (TC)
--
FnBoolState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Boolean data type representing enabled/disabled"
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
FnLanguage ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerated type for user interface languages"
SYNTAX INTEGER {
english (1),
simplifiedChinese (2),
japanese (3),
korean (4),
spanish (5),
traditionalChinese (6),
french (7),
portuguese (8),
undefined (255)
}
FnIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Data type for table index values"
SYNTAX Integer32 (0..2147483647)
FnSessionProto ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Data type for session protocols"
SYNTAX INTEGER {
ip (0),
icmp (1),
igmp (2),
ipip (4),
tcp (6),
egp (8),
pup (12),
udp (17),
idp (22),
ipv6 (41),
rsvp (46),
gre (47),
esp (50),
ah (51),
ospf (89),
pim (103),
comp (108),
raw (255)
}
--
-- Fortinet Enterprise Structure of Management Information (SMI)
--
fnCoreMib OBJECT IDENTIFIER ::= { fortinet 100 }
--
-- Fortinet Product Family MIB Object Identifier Assignments
--
-- fnFortiGateMib OBJECT IDENTIFIER ::= { fortinet 101 }
-- fnFortiAnalyzerMib OBJECT IDENTIFIER ::= { fortinet 102 }
-- fnFortiManagerMib OBJECT IDENTIFIER ::= { fortinet 103 }
-- fnFortiDefenderMib OBJECT IDENTIFIER ::= { fortinet 104 }
-- fnFortiMailMib OBJECT IDENTIFIER ::= { fortinet 105 }
-- fnFortiSwitchMib OBJECT IDENTIFIER ::= { fortinet 106 }
-- fnFortiWebMib OBJECT IDENTIFIER ::= { fortinet 107 }
-- fnFortiScanMib OBJECT IDENTIFIER ::= { fortinet 108 }
-- fnFortiCacheMib OBJECT IDENTIFIER ::= { fortinet 109 }
-- fnFortiDNSMib OBJECT IDENTIFIER ::= { fortinet 110 }
-- fnFortiDDoSMib OBJECT IDENTIFIER ::= { fortinet 111 }
-- fnFortiADCMib OBJECT IDENTIFIER ::= { fortinet 112 }
-- fnFortiAuthenticatorMib OBJECT IDENTIFIER ::= { fortinet 113 }
-- fnFortiRecorderMib OBJECT IDENTIFIER ::= { fortinet 114 }
-- fnFortiVoiceMib OBJECT IDENTIFIER ::= { fortinet 115 }
-- fnFortiBridgeMib OBJECT IDENTIFIER ::= { fortinet 116 }
-- fnFortiDirectorMib OBJECT IDENTIFIER ::= { fortinet 117 }
-- fnFortiWANMib OBJECT IDENTIFIER ::= { fortinet 118 }
--
--
-- fnCoreMib.fnCommon
--
fnCommon OBJECT IDENTIFIER ::= { fnCoreMib 1 }
--
-- fnCoreMib.fnCommon.fnSystem
--
fnSystem OBJECT IDENTIFIER ::= { fnCommon 1 }
fnSysSerial OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device serial number. This is the same serial number as given
in the ENTITY-MIB tables for the base entity."
::= { fnSystem 1 }
--
-- fnCoreMib.fnCommon.fnMgmt
--
fnMgmt OBJECT IDENTIFIER ::= { fnCommon 2 }
fnMgmtLanguage OBJECT-TYPE
SYNTAX FnLanguage
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Language used for administration interfaces"
::= { fnMgmt 1 }
fnAdmin OBJECT IDENTIFIER ::= { fnMgmt 100 }
fnAdminNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of admin accounts in fnAdminTable"
::= { fnAdmin 1 }
fnAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF FnAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of administrator accounts on the device. This table is
intended to be extended with platform specific information."
::= { fnAdmin 2 }
fnAdminEntry OBJECT-TYPE
SYNTAX FnAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a particular admin account"
INDEX { fnAdminIndex }
::= { fnAdminTable 1 }
FnAdminEntry ::= SEQUENCE {
fnAdminIndex Integer32,
fnAdminName DisplayString,
fnAdminAddrType InetAddressType,
fnAdminAddr InetAddress,
fnAdminMask InetAddressPrefixLength
}
fnAdminIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index uniquely defining an administrator account within the fnAdminTable"
::= { fnAdminEntry 1 }
fnAdminName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user-name of the specified administrator account"
::= { fnAdminEntry 2 }
fnAdminAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in fnAdminAddr, in compliance with INET-ADDRESS-MIB"
::= { fnAdminEntry 3 }
fnAdminAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address prefix identifying where the administrator account can
be used from, typically an IPv4 address. The address type/format is
determined by fnAdminAddrType."
::= { fnAdminEntry 4 }
fnAdminMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address prefix length (or network mask) applied to the fgAdminAddr
to determine the subnet or host the administrator can access the device from"
::= { fnAdminEntry 5 }
--
-- fnCoreMib.fnCommon.fnTraps
--
fnTraps OBJECT IDENTIFIER ::= { fnCommon 3 }
fnTrapsPrefix OBJECT IDENTIFIER ::= { fnTraps 0 }
fnTrapObjects OBJECT IDENTIFIER ::= { fnTraps 1 }
fnGenTrapMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Generic message associated with an event. The content will
depend on the nature of the trap."
::= { fnTrapObjects 1 }
fnTrapCpuThreshold NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"Indicates that the CPU usage has exceeded the configured threshold."
::= { fnTrapsPrefix 101 }
fnTrapMemThreshold NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"Indicates memory usage has exceeded the configured threshold."
::= { fnTrapsPrefix 102 }
fnTrapLogDiskThreshold NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"Log disk usage has exceeded the configured threshold. Only available
on devices with log disks."
::= { fnTrapsPrefix 103 }
fnTrapTempHigh NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"A temperature sensor on the device has exceeded its threshold.
Not all devices have thermal sensors. See manual for specifications."
::= { fnTrapsPrefix 104 }
fnTrapVoltageOutOfRange NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"Power levels have fluctuated outside of normal levels. Not all devices
have voltage monitoring instrumentation. See manual for specifications."
::= { fnTrapsPrefix 105 }
fnTrapPowerSupplyFailure NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"Power supply failure detected. Not available on all models. Available
on some devices which support redundant power supplies. See manual
for specifications."
::= { fnTrapsPrefix 106 }
fnTrapAmcIfBypassMode NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"An AMC interface entered bypass mode. Available on models with an AMC
expansion slot. Used with the ASM-CX4 and ASM-FX2 cards."
::= { fnTrapsPrefix 107 }
fnTrapFanFailure NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"A fan failure has been detected. Not all devices have fan sensors.
See manual for specifications."
::= { fnTrapsPrefix 108 }
fnTrapIfEnterBypassMode NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"Interface entered bypass mode. Available on models with bypass ports."
::= { fnTrapsPrefix 109 }
fnTrapIfExitBypassMode NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"Interface exited bypass mode. Available on models with bypass ports."
::= { fnTrapsPrefix 110 }
fnTrapIpChange NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName, ifIndex }
STATUS current
DESCRIPTION
"Indicates that the IP address of the specified interface has been changed."
::= { fnTrapsPrefix 201 }
fnTrapTest NOTIFICATION-TYPE
OBJECTS { fnSysSerial, sysName }
STATUS current
DESCRIPTION
"Trap sent for diagnostic purposes by an administrator."
::= { fnTrapsPrefix 999 }
--
-- fnCoreMib.fnCommon.fnMIBConformance
--
fnMIBConformance OBJECT IDENTIFIER ::= { fnCoreMib 10 }
fnSystemComplianceGroup OBJECT-GROUP
OBJECTS { fnSysSerial }
STATUS current
DESCRIPTION
"Objects relating to the physical device."
::= { fnMIBConformance 1 }
fnMgmtComplianceGroup OBJECT-GROUP
OBJECTS { fnMgmtLanguage }
STATUS current
DESCRIPTION
"Objects relating the management of a device."
::= { fnMIBConformance 2 }
fnAdminComplianceGroup OBJECT-GROUP
OBJECTS { fnAdminNumber, fnAdminName, fnAdminAddrType,
fnAdminAddr, fnAdminMask }
STATUS current
DESCRIPTION
"Administration access control objects."
::= { fnMIBConformance 3 }
fnTrapsComplianceGroup NOTIFICATION-GROUP
NOTIFICATIONS { fnTrapCpuThreshold, fnTrapMemThreshold,
fnTrapLogDiskThreshold, fnTrapTempHigh,
fnTrapVoltageOutOfRange, fnTrapPowerSupplyFailure,
fnTrapAmcIfBypassMode, fnTrapIfEnterBypassMode,
fnTrapIfExitBypassMode, fnTrapFanFailure,
fnTrapIpChange, fnTrapTest }
STATUS current
DESCRIPTION
"Event notifications"
::= { fnMIBConformance 4 }
fnNotifObjectsComplianceGroup OBJECT-GROUP
OBJECTS { fnGenTrapMsg }
STATUS current
DESCRIPTION
"Object identifiers used in notifications"
::= { fnMIBConformance 5 }
fnMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the application MIB."
MODULE -- this module
GROUP fnSystemComplianceGroup
DESCRIPTION
"This group is mandatory for all Fortinet network appliances
supporting this MIB."
GROUP fnMgmtComplianceGroup
DESCRIPTION
"This group is optional for devices that do not support common
management interface options such as multiple languages."
GROUP fnAdminComplianceGroup
DESCRIPTION
"This group should be accessible on any device supporting
administrator authentication."
GROUP fnTrapsComplianceGroup
DESCRIPTION
"Traps are optional. Not all models support all traps. Consult
product literature to see which traps are supported."
GROUP fnNotifObjectsComplianceGroup
DESCRIPTION
"Object identifiers used in notifications. Objects are required
if their containing trap is implemented."
::= { fnMIBConformance 100 }
END