HAM
/
aprs-digipeater
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

README.md aktualisiert

This commit is contained in:
Jörg Deckert 2024-06-27 08:44:46 +02:00
parent f0061837f5
commit cd845185fe
1 changed files with 15 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
README.md
View File

@ -85,10 +85,6 @@ python ~/SHARI/SA818-prog2.01.py
```
```
No previous programming data available.
------------------------------------------------------
SA818-prog, Version 2.01
Programing SHARI PiXX / SHARI PiHat / SA818(U/V) Module
Programming Device name:
@ -100,10 +96,13 @@ Testing serial communications
Serial communications with the SA818 module are OK
What are you programming?
Enter 1,2 or 3 where SHARI PiXX=1, SHARI PiHat=2, SA818 Module=3: 2
Enter 1,2 or 3 where SHARI PiXX=1, SHARI PiHat=2, SA818 Module=3: 3
Programming a SHARI PiHat
Wide channel spacing
Programming a generic SA818 module
Enter Channel Spacing (Narrow=0 or Wide=1): 0
Programming an SA818 module
Narrow channel spacing
Enter band (VHF=1, UHF=2): 1
You chose VHF
@ -120,8 +119,8 @@ Do you want to use a sub audible tone? (0 = No, 1 = CTCSS, 2= DCS): 0
Enter Squelch Value (0-8): 0
Squelch is set to 0
Enter Volume (1-8): 5
Volume is set to 5
Enter Volume (1-8): 6
Volume is set to 6
Enable Pre/De-Emphasis (y/[n]): n
Pre/De-Emphasis is not enabled
@ -135,14 +134,14 @@ Enable Low Pass Filter (y/[n]): n
Verify:
------------------------------------------------------
Channel Spacing: 1
Channel Spacing: 0
Tx Frequency: 144.8000
Rx Frequency: 144.8000
Tx CTCSS code: 0000
Rx CTCSS code: 0000
Reverse Burst: n
Squelch Value: 0
Volume Value: 5
Volume Value: 6
PreEmphasis Enabled: n
High Pass Enabled: n
Low Pass Enabled: n
@ -151,7 +150,7 @@ Verify:
Is this correct ([y]/n) ?y
Sending Frequency, Sub Audible Tone, and Squelch Information...
Frequency, Sub Audible Tone, and Squelch information correct
Setting Volume - 5
Setting Volume - 6
Setting Reverse Burst
Setting Filters
@ -159,6 +158,8 @@ Programming Successful
Configuration log written to /home/aprsadmin/.SA818.log
```
Bei "What are you programming?" wird nicht "SHARI PiHat=2" gewählt, weil damit automatisch Wide channel spacing (25kHz) konfiguriert werden würde. Für APRS ist aber "Narrow channel spacing" mit 12,5kHz korrekt.
## SHARI PiHat Audio
@ -200,13 +201,13 @@ CHANNEL 0
PTT CM108
```
Nun kann Dire-Wolf für einen ersten test gestartet werden:
Nun kann Dire-Wolf für einen ersten Test gestartet werden:
```
/usr/bin/direwolf -c /etc/direwolf.conf
```
Nun sollten die empfangenen APRS-Pakete angezeigt werden.
Damit sollten die empfangenen APRS-Pakete angezeigt werden.
## Installation dxlAPRS